High Temperature Limit Switch with Coil Spring

$148.15
High temperature coil spring limit switch has spring top diameter 6.5mm or 1.2mm, can be used for micromotion detecting. The coil spring also has automatic reset function. The default rated current and voltage is 5A/220VAC. Other values can be customizable like AC 120 volt, AC 380 volt, DC 12 volt, DC 48 volt, etc. High temperature limit switch with coil spring has fully enclosed 1NO + 1NC contact switches can be used in the environment temperature 350℃ (622℉).
SKU: ATO-HTLS-CS
*
Free Shipping
Delivery date: 6-12 days

High temperature limit switch has coil spring with top diameter 6.5mm or 1.2mm, contact type 1NO + 1NC and rated current/voltage 5A/220VAC. It operates reliably in high-humidity environments with a humidity tolerance of <95%RH.

Specification

ModelATO-HTLS-XWKGATO-HTLS-XWKH
Weight258g
Top diameter of coil spring *Φ6.5mmΦ1.2mm
Rated voltage220VAC (Customizable rated voltage is shown in the reference table below.)
Rated current5A (Customizable rated current is shown in the reference table below.)
Contact type1NO+1NC (NC pin: 1 & 2, NO pin: 3 & 4)
Operating speed1mm/s~2m/s
Operating frequencyMachinery: 120 times/minute
Electric: 30 times/minute
Contact resistance<15MΩ, initial stage
Insulation resistance>100MΩ (<500VDC)
Withstand voltageBetween no-connection terminals: 1000VAC, 50/60Hz lasts 1 minute
Between the terminal and the contact: 2000VAC, 50/60Hz lasts 1 minute
Between terminal and no-load current metal: 2200VAC, 50/60Hz lasts 1 minute
VibrationMisoperation endurance: 10~55Hz, 1.5mm, double-amplitude
ImpactMechanical endurance: >1000m/s2 (>100G)
Misoperation endurance: >300m/s2 (>30G)
Shell materialCast aluminum alloy
Temperature-10~+350℃ (14~622℉)
Humidity<95%RH
Working lifeMachinery: >15million times
Electric: >0.5million times
Protection classIP66


Reference table for customizable rated voltage and rated current

Rated voltageRated current (A)
Non-inductive loadInductive load
Resistive loadLamp loadInductive loadMotor load
NCNONCNONCNONCNO
125VAC1031.51052
250VAC521531.0
480VAC31.50.831.50.8
600VAC110.51.510.5
8VDC1063106
14VDC1063106
30VDC64364
125VDC0.80.20.20.80.2
250VDC0.40.10.10.40.1

Note:

  1. Power factor of inductive load is above 0.4 (AC). The time constant is below 7ms (DC).
  2. The inrush current of lamp load is 10 times that of steady state current, and the inrush current of motor load is 6 times that of steady state current.

Dimension (unit: mm)

High temperature limit switch with 6.5mm/1.2mm coil spring dimension

Tips: Electrical considerations for limit switches

In the case of AC and DC, the capacity of limit switch is very different, so please use the limit switch within the rated range.
In the case of DC, the control capacity of the limit switch is extremely low. This is mainly due to the fact that direct current does not have a zero point (current zero intersection) like alternating current, and once an arc is generated, it is difficult to disappear. The arc time is long and the current direction is fixed, so there will be a migration of the contacts. Contacts cannot be disconnected due to unevenness.
In the case of including induction, a reverse induced voltage is generated. The higher the voltage, the greater the energy, and the greater the loss and migration of the contact. Therefore, use the limit switch within the rated conditions. Use a limit switch for micro-loads in the case of small voltages and currents. Using general silver contacts may reduce contact reliability.

VFD Emergency Stop with Limit Switches

In this video, you will learn about the setup and operation of emergency stopping a motor by using limit switches and a variable frequency drive (VFD). By combining the limit switches of the emergency stop function with the VFD GK3000, a strong safety measure can be established that can quickly stop the motor operation in an emergency.

Automatic Material Trolley Control with Limit Switch

In this video, the method of applying limit switches to automatic material trolley control is demonstrated.

Roller Limit Switch NO NC Contact Wiring and Detection

In this video, the roller limit switch NO NC contact wiring and detection operation are shown.

Product reviews
What is tripping travel of your high temperature limit switch?
5
Shelby
Avatar
11/4/2021 12:12 AM
What is tripping travel of your high temperature limit switch?
Was this review helpful? Yes No (0/0)
ATO Responded
Tripping travel: ±5 degrees.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High temperature limit switch has coil spring with top diameter 6.5mm or 1.2mm, contact type 1NO + 1NC and rated current/voltage 5A/220VAC. It operates reliably in high-humidity environments with a humidity tolerance of <95%RH.

Specification

ModelATO-HTLS-XWKGATO-HTLS-XWKH
Weight258g
Top diameter of coil spring *Φ6.5mmΦ1.2mm
Rated voltage220VAC (Customizable rated voltage is shown in the reference table below.)
Rated current5A (Customizable rated current is shown in the reference table below.)
Contact type1NO+1NC (NC pin: 1 & 2, NO pin: 3 & 4)
Operating speed1mm/s~2m/s
Operating frequencyMachinery: 120 times/minute
Electric: 30 times/minute
Contact resistance<15MΩ, initial stage
Insulation resistance>100MΩ (<500VDC)
Withstand voltageBetween no-connection terminals: 1000VAC, 50/60Hz lasts 1 minute
Between the terminal and the contact: 2000VAC, 50/60Hz lasts 1 minute
Between terminal and no-load current metal: 2200VAC, 50/60Hz lasts 1 minute
VibrationMisoperation endurance: 10~55Hz, 1.5mm, double-amplitude
ImpactMechanical endurance: >1000m/s2 (>100G)
Misoperation endurance: >300m/s2 (>30G)
Shell materialCast aluminum alloy
Temperature-10~+350℃ (14~622℉)
Humidity<95%RH
Working lifeMachinery: >15million times
Electric: >0.5million times
Protection classIP66


Reference table for customizable rated voltage and rated current

Rated voltageRated current (A)
Non-inductive loadInductive load
Resistive loadLamp loadInductive loadMotor load
NCNONCNONCNONCNO
125VAC1031.51052
250VAC521531.0
480VAC31.50.831.50.8
600VAC110.51.510.5
8VDC1063106
14VDC1063106
30VDC64364
125VDC0.80.20.20.80.2
250VDC0.40.10.10.40.1

Note:

  1. Power factor of inductive load is above 0.4 (AC). The time constant is below 7ms (DC).
  2. The inrush current of lamp load is 10 times that of steady state current, and the inrush current of motor load is 6 times that of steady state current.

Dimension (unit: mm)

High temperature limit switch with 6.5mm/1.2mm coil spring dimension

Tips: Electrical considerations for limit switches

In the case of AC and DC, the capacity of limit switch is very different, so please use the limit switch within the rated range.
In the case of DC, the control capacity of the limit switch is extremely low. This is mainly due to the fact that direct current does not have a zero point (current zero intersection) like alternating current, and once an arc is generated, it is difficult to disappear. The arc time is long and the current direction is fixed, so there will be a migration of the contacts. Contacts cannot be disconnected due to unevenness.
In the case of including induction, a reverse induced voltage is generated. The higher the voltage, the greater the energy, and the greater the loss and migration of the contact. Therefore, use the limit switch within the rated conditions. Use a limit switch for micro-loads in the case of small voltages and currents. Using general silver contacts may reduce contact reliability.

Product reviews
What is tripping travel of your high temperature limit switch?
5
Shelby
Avatar
11/4/2021 12:12 AM
What is tripping travel of your high temperature limit switch?
Was this review helpful? Yes No (0/0)
ATO Responded
Tripping travel: ±5 degrees.
Only registered users can write reviews
Customers who bought this item also bought

High Temperature Limit Switch with Adjustable Rod Lever

ATO-HTLS-ARDL
$148.15
High temperature limit switch has a rod lever with adjustable length from 25mm to 140mm. The internal contact switches 1NO + 1NC are casting from high temperature resistant material. So limit switch can be used in the 350℃ (622℉) high temperature occasion, such as coal mine machinery, vertical pit furnace, etc. Adjustable rod lever limit switch has automatic reset function. The default rated current and voltage is 5A/220VAC, other AC/DC voltage can be designed according to customer's requirement.