Flat Plate Force Sensor for Battery Equipment, 0-5 ton

$336.89
Flat plate force sensor for battery equipment with measuring range of 0-1/2/3/5 ton, has a sensitivity range of 1.5-2.0 mV/V and a non-linearity of ±0.5% F.S. The load cell has a full scale of ±0.5% F.S., with a drift of ±0.3% and zero output accuracy of ±1% F.S. It operates between -20°C and 80°C, with an input resistance of 750 ± 20 Ω and output resistance of 700 ± 5 Ω. Widely used in battery equipment force measurement, new energy projects and various engineering devices force measurement system.
SKU: ATO-FS-PB001
*
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Flat plate force sensor for battery equipment measures 0-5 tons with a sensitivity of 1.5-2.0 mV/V and non-linearity of ±0.5% F.S. It operates within a temperature range of -20°C to 80°C and requires an excitation voltage of 10-15V. With input resistance of 750 ± 20 Ω and output resistance of 700 ± 5 Ω, it's ideal for battery equipment, new energy projects, and engineering systems.

Specification

ModelATP-DYPB-001
Measuring Range0-5 ton
Sensitivity1.5-2.0 mV/V
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Non-linearity±0.5%F.S.
Full Scale±0.5%F.S.
Hysteresis±0.5%F.S.
Drift±0.3%F.S.
Zero Output±1%F.S.
Zero Temperature Sensitivity±0.1%F.S./10°C
Sensitivity Temperature Sensitivity±0.3%F.S./10°C
Operating Temperature Range-20°C to 80°C
Input Resistance750±20Ω
Output Resistance700±5Ω
Safety Load≤150%F.S.
Insulation Resistance≥5000 MΩ (50V DC)
Recommended Excitation Voltage10-15V


Feature

  • Wide Measurement Range: The flat plate force sensor has a broad force measurement range, ensuring high precision and stability with excellent output consistency.
  • Ideal for Battery Equipment and Energy Projects: Suitable for use in battery equipment, new energy projects, and various power measurement systems.
  • Durable 40Cr Alloy Steel Construction: Made from 40Cr alloy steel, known for its excellent resistance to mechanical fatigue, high strength, and good weldability. The surface is resistant to corrosion and rust, with optional stainless steel material for enhanced durability.
  • Reliable Performance with Factory Testing: The force sensor from the factory have been subjected to aging tests and are guaranteed to be durable and of high quality.
  • High Precision and Large Force Area: Designed with high precision and a large force measurement area, this sensor is particularly suitable for battery pressure testing and applications requiring precise force measurement.

Dimension (unit: mm)

Flat plate force sensor dimension

Wiring Instructions

Flat plate force sensor wiring instructions

Application

Flat plate force sensor used in battery press fitting and other fields, with large force area and high precision.

Flat plate force sensor application

Tips: What industries benefit from using this force sensor?

The Flat Plate Force Sensor is highly versatile and can be used across various industries, particularly those involving battery equipment, new energy systems, and engineering projects. In the battery industry, the sensor plays a key role in monitoring the forces involved in battery assembly, pressure testing, and material handling. In new energy projects, such as solar and wind energy, the sensor is used for monitoring structural loads, ensuring the durability of installations like solar panels or wind turbines. Manufacturing and engineering sectors also benefit from the sensor’s precision in force measurement during equipment testing, product development, and quality control. Its use extends to fields like telecommunications (measuring cable tension), automotive manufacturing, and construction (monitoring load on machinery), making it an invaluable tool for a wide range of industrial applications.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

Product reviews
Stable Performance
5
Gabiel
Avatar
1/21/2025 7:37 PM
I recently purchased this Flat Plate Force Sensor for Battery Equipment and am very satisfied with its performance. The design of this force sensor is very precise, made of high-quality materials, ensuring stability and high accuracy during long-term use. The installation process is very simple, and the size and structure of the sensor are very suitable for various battery devices, which can accurately detect the force applied to the battery.
Was this review helpful? Yes No (0/0)
Designing high-temperature chambers
5
Conlos
Avatar
12/11/2025 7:14 PM
I am designing several high-temperature chambers, each requiring 4 load cells. The temperature is approximately 70-75 degrees Celsius. Do I need to use the full cable that comes with the load cells to connect to the summing box? My load cell combination is: ATP-DYPB-001/ATO-FS-PB001 (0-2 tons), ATO-LCTR-OA (4-20mA), ATO-LCJBX-JXH-S4/ATO-LCBOX-10I.
Was this review helpful? Yes No (0/0)
ATO Responded
We can customize load cells ATO-DYPB-001/ATO-FS-PB001 (0-2 tons) suitable for high temperatures of 70-75°C, including the high-temperature cable. Please tell us the required cable length for each load cell.
Installation Instructions
4
Tomo
Avatar
12/30/2025 10:54 PM
Do you have installation instructions/guides for the ATP-DYPB-001 force sensor? We have ordered these sensors but are still planning how to install them.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we do not have installation instructions for this load cell. Normally, when installing the sensor, just ensure it is level and coaxial.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Flat plate force sensor for battery equipment measures 0-5 tons with a sensitivity of 1.5-2.0 mV/V and non-linearity of ±0.5% F.S. It operates within a temperature range of -20°C to 80°C and requires an excitation voltage of 10-15V. With input resistance of 750 ± 20 Ω and output resistance of 700 ± 5 Ω, it's ideal for battery equipment, new energy projects, and engineering systems.

Specification

ModelATP-DYPB-001
Measuring Range0-5 ton
Sensitivity1.5-2.0 mV/V
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Non-linearity±0.5%F.S.
Full Scale±0.5%F.S.
Hysteresis±0.5%F.S.
Drift±0.3%F.S.
Zero Output±1%F.S.
Zero Temperature Sensitivity±0.1%F.S./10°C
Sensitivity Temperature Sensitivity±0.3%F.S./10°C
Operating Temperature Range-20°C to 80°C
Input Resistance750±20Ω
Output Resistance700±5Ω
Safety Load≤150%F.S.
Insulation Resistance≥5000 MΩ (50V DC)
Recommended Excitation Voltage10-15V


Feature

  • Wide Measurement Range: The flat plate force sensor has a broad force measurement range, ensuring high precision and stability with excellent output consistency.
  • Ideal for Battery Equipment and Energy Projects: Suitable for use in battery equipment, new energy projects, and various power measurement systems.
  • Durable 40Cr Alloy Steel Construction: Made from 40Cr alloy steel, known for its excellent resistance to mechanical fatigue, high strength, and good weldability. The surface is resistant to corrosion and rust, with optional stainless steel material for enhanced durability.
  • Reliable Performance with Factory Testing: The force sensor from the factory have been subjected to aging tests and are guaranteed to be durable and of high quality.
  • High Precision and Large Force Area: Designed with high precision and a large force measurement area, this sensor is particularly suitable for battery pressure testing and applications requiring precise force measurement.

Dimension (unit: mm)

Flat plate force sensor dimension

Wiring Instructions

Flat plate force sensor wiring instructions

Application

Flat plate force sensor used in battery press fitting and other fields, with large force area and high precision.

Flat plate force sensor application

Tips: What industries benefit from using this force sensor?

The Flat Plate Force Sensor is highly versatile and can be used across various industries, particularly those involving battery equipment, new energy systems, and engineering projects. In the battery industry, the sensor plays a key role in monitoring the forces involved in battery assembly, pressure testing, and material handling. In new energy projects, such as solar and wind energy, the sensor is used for monitoring structural loads, ensuring the durability of installations like solar panels or wind turbines. Manufacturing and engineering sectors also benefit from the sensor’s precision in force measurement during equipment testing, product development, and quality control. Its use extends to fields like telecommunications (measuring cable tension), automotive manufacturing, and construction (monitoring load on machinery), making it an invaluable tool for a wide range of industrial applications.

Product reviews
Stable Performance
5
Gabiel
Avatar
1/21/2025 7:37 PM
I recently purchased this Flat Plate Force Sensor for Battery Equipment and am very satisfied with its performance. The design of this force sensor is very precise, made of high-quality materials, ensuring stability and high accuracy during long-term use. The installation process is very simple, and the size and structure of the sensor are very suitable for various battery devices, which can accurately detect the force applied to the battery.
Was this review helpful? Yes No (0/0)
Designing high-temperature chambers
5
Conlos
Avatar
12/11/2025 7:14 PM
I am designing several high-temperature chambers, each requiring 4 load cells. The temperature is approximately 70-75 degrees Celsius. Do I need to use the full cable that comes with the load cells to connect to the summing box? My load cell combination is: ATP-DYPB-001/ATO-FS-PB001 (0-2 tons), ATO-LCTR-OA (4-20mA), ATO-LCJBX-JXH-S4/ATO-LCBOX-10I.
Was this review helpful? Yes No (0/0)
ATO Responded
We can customize load cells ATO-DYPB-001/ATO-FS-PB001 (0-2 tons) suitable for high temperatures of 70-75°C, including the high-temperature cable. Please tell us the required cable length for each load cell.
Installation Instructions
4
Tomo
Avatar
12/30/2025 10:54 PM
Do you have installation instructions/guides for the ATP-DYPB-001 force sensor? We have ordered these sensors but are still planning how to install them.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we do not have installation instructions for this load cell. Normally, when installing the sensor, just ensure it is level and coaxial.
Only registered users can write reviews