Digital Stepper Driver 2-6A for Nema 23, 34, 42 Stepper Motor

$163.08
ATODSP86 is digital 2-phase stepper motor driver, it is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machine and so on. Capable of driving Nema 23, 34, 42 open-loop hybrid 2 phase stepper motors.
SKU: ATO-STEP-D26A2334
*
Free Shipping
Delivery date: 6-12 days

2-phase digital stepper driver, 18-80V AC, 2-6A for Nema 23, 34, 42 2 phase stepper motor, manufacturer direct sale.

Features:

  • Low motor vibration, low noise, no loss of step
  • Optical isolation, difference signal input.
  • Automatic motor parameter identification.
  • Vector control, ultra-low heating.
  • Offer 12-24v control signal interface.
  • Step and direction control.
  • Fast response, no delay and zero setting time.
  • Much lower cost than traditional servo systems.
  • No torque reservation.

Specifications

Basics Information
ModelATODSP86
Size151 x 97 x 48 mm
Phase2
MaterialStainless Steel
Mounting Hole Distance143 mm
Max Input Power300 W
Input Voltage Range18-80V AC
Output Current2-6 A
Control ModeStep & Direction
Function Description
FunctionsOperation Instructions
Signal InterfacePULPUL+ is the positive end of the control pulse signal PUL- is the negative end of the control pulse signal
DIRDIR+ is the positive end of directional signal DIR- is the negative end of directional signal
ENAENA+ is the positive end of enabling signal ENA+ is the negative end of enabling signal
Motor InterfaceAA+ is connected with the positive end of the A phase winding of the stepping motor A- is connected with the negative end of the A phase winding of the stepping motor
BB+ is connected with the positive end of the B phase winding of the stepping motor B- is connected with the negative end of the B phase winding of the stepping motor
When the A and B two phase windings are switched, the motor direction is reversed
Indicator Light1. The green light is the power indicating lamp. When the drive is powered on, the green light is always on. 2. The red light is the fault indicating lamp. When the overvoltage and overcurrent faults occur, the trouble lamp is always on.
Note: The default input signal is 5V pulse signal. When 24V input signal is required, please in series with1.8-2kΩ resistance.

Switch of Options

Peak Output CurrentREF Output CurrentSW1SW2SW3
2.00A2.40AONONON
2.57A3.08AOFFONON
3.14A3.77AONOFFON
3.71A4.45AOFFOFFON
4.28A5.14AONONOFF
4.86A5.83AOFFONOFF
5.43A6.52AONOFFOFF
6.00A7.20AOFFOFFOFF

Micro Step Selection

PUL/REVSW5SW6SW7SW8
400ONONONON
800OFFONONON
1600ONOFFONON
3200OFFOFFONON
6400ONONOFFON
12800OFFONOFFON
25600ONOFFOFFON
51200OFFOFFOFFON
1000ONONONOFF
2000OFFONONOFF
4000ONOFFONOFF
5000OFFOFFONOFF
8000ONONOFFOFF
10000OFFONOFFOFF
20000ONOFFOFFOFF
40000OFFOFFOFFOFF

Driver Wiring Diagram
DSP48 Wiring
Driver Wiring Diagram
Installation Size (Unit: mm)
Dsp86 dimension

Details

2 Phase Stepper Motor Driver 2-6A Details

Tips: Single-shaft stepper motor driver
The stepper motor driver drives the stepper motor using the point pulse signal received from the controller. It is in the middle of the controlling unit: Controller - motor driver - stepper motor. Stepper motor drivers are divided into single-shaft driver and double-shaft driver. We usually use a single-shaft driver. One single-shaft stepper motor driver transfers processed pulse signals to another stepper motor while one double-shaft stepper motor driver transfers processed pulse signals to another two stepper motors. That is, a double-shaft driver driving two stepper motors is rare on the current market.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Product reviews
Work prefectly
5
Hess
Avatar
7/5/2021 1:21 AM
I bought two 2-6A digital stepper drivers. So far, they can drive stepper motors smoothly and are easy to use. Exactly the stepper driver I want.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2-phase digital stepper driver, 18-80V AC, 2-6A for Nema 23, 34, 42 2 phase stepper motor, manufacturer direct sale.

Features:

  • Low motor vibration, low noise, no loss of step
  • Optical isolation, difference signal input.
  • Automatic motor parameter identification.
  • Vector control, ultra-low heating.
  • Offer 12-24v control signal interface.
  • Step and direction control.
  • Fast response, no delay and zero setting time.
  • Much lower cost than traditional servo systems.
  • No torque reservation.

Specifications

Basics Information
ModelATODSP86
Size151 x 97 x 48 mm
Phase2
MaterialStainless Steel
Mounting Hole Distance143 mm
Max Input Power300 W
Input Voltage Range18-80V AC
Output Current2-6 A
Control ModeStep & Direction
Function Description
FunctionsOperation Instructions
Signal InterfacePULPUL+ is the positive end of the control pulse signal PUL- is the negative end of the control pulse signal
DIRDIR+ is the positive end of directional signal DIR- is the negative end of directional signal
ENAENA+ is the positive end of enabling signal ENA+ is the negative end of enabling signal
Motor InterfaceAA+ is connected with the positive end of the A phase winding of the stepping motor A- is connected with the negative end of the A phase winding of the stepping motor
BB+ is connected with the positive end of the B phase winding of the stepping motor B- is connected with the negative end of the B phase winding of the stepping motor
When the A and B two phase windings are switched, the motor direction is reversed
Indicator Light1. The green light is the power indicating lamp. When the drive is powered on, the green light is always on. 2. The red light is the fault indicating lamp. When the overvoltage and overcurrent faults occur, the trouble lamp is always on.
Note: The default input signal is 5V pulse signal. When 24V input signal is required, please in series with1.8-2kΩ resistance.

Switch of Options

Peak Output CurrentREF Output CurrentSW1SW2SW3
2.00A2.40AONONON
2.57A3.08AOFFONON
3.14A3.77AONOFFON
3.71A4.45AOFFOFFON
4.28A5.14AONONOFF
4.86A5.83AOFFONOFF
5.43A6.52AONOFFOFF
6.00A7.20AOFFOFFOFF

Micro Step Selection

PUL/REVSW5SW6SW7SW8
400ONONONON
800OFFONONON
1600ONOFFONON
3200OFFOFFONON
6400ONONOFFON
12800OFFONOFFON
25600ONOFFOFFON
51200OFFOFFOFFON
1000ONONONOFF
2000OFFONONOFF
4000ONOFFONOFF
5000OFFOFFONOFF
8000ONONOFFOFF
10000OFFONOFFOFF
20000ONOFFOFFOFF
40000OFFOFFOFFOFF

Driver Wiring Diagram
DSP48 Wiring
Driver Wiring Diagram
Installation Size (Unit: mm)
Dsp86 dimension

Details

2 Phase Stepper Motor Driver 2-6A Details

Tips: Single-shaft stepper motor driver
The stepper motor driver drives the stepper motor using the point pulse signal received from the controller. It is in the middle of the controlling unit: Controller - motor driver - stepper motor. Stepper motor drivers are divided into single-shaft driver and double-shaft driver. We usually use a single-shaft driver. One single-shaft stepper motor driver transfers processed pulse signals to another stepper motor while one double-shaft stepper motor driver transfers processed pulse signals to another two stepper motors. That is, a double-shaft driver driving two stepper motors is rare on the current market.

Product reviews
Work prefectly
5
Hess
Avatar
7/5/2021 1:21 AM
I bought two 2-6A digital stepper drivers. So far, they can drive stepper motors smoothly and are easy to use. Exactly the stepper driver I want.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Microstep Driver 20-50V for 2 phase Nema 17, 23 Stepper Motor

ATO-STEP-D205017
$85.69
ATOSH2024 is closed-loop 2-phase stepper motor driver, it's widely used in semiconductor, electronic processing equipment, laser processing, medical equipment and small cnc. Capable of driving 2 phase Nema 17, 23, open-loop hybrid stepper motors.