DC Current Transducer, 0-1A/5A/10A/75mV

$175.54
Buy a low price DC current transducer, DC 0-1A/0-5A/0-10A/75mV current input can be selected, with an accuracy of up to 0.2/0.5, and a response time of ≤400ms. The DC current transducer is reliable and durable, with a long life, providing accurate detection for the power system.
SKU: ATO-CUS-DC10
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

The DC current transducer has low energy consumption and strong durability. It consumes about 3W in DC and about 4VA in AC. The compressive strength is AC2kVrms/min. The DC current transducer is small in size and easy to install. It is installed with 35mm standard rails or base screws and is suitable for different situations.

Specification

ModelATO-PT-HDB-DA
DC Input0-1A 0-5A, 0-10A, 75mV, customization (optional)
Input LoadCT of current transformer: ≤0.2VA
Allow OverloadCurrent×2 times the nominal value lasts
Current×10 times the nominal value 10s
Accuracy0.2, 0.5 (optional)
Response Time≤400ms
Output Channel1 channel, 2 channels, 3 channels (optional)
Output Voltage0-10V, 0-5V, 1-5V (load resistance = input voltage/10mAdc)
Output Current0-1mA, 0-10mA, 0-20mA, 4-20mA (Load resistance=10VDC/output current)
Other OutputRS485, customization
Output Ripple≤0.5% RO Peak-to-peak value
Work Environment Temperature and Humidity0~50℃/less than 80% relative humidity (non-condensing state)
Storage Conditions Temperature and Humidity-20~70℃/less than 70% relative humidity (non-condensing state)
Aux.power SupplyDC12V, DC24V, AC220V, DC220V, AC110V, DC110V, 2-wire circuit power supply (optional)
IsolationInput/output/power supply/shell
Power ConsumptionDC about 3W, AC about 4VA
Material of ShellABS fireproof material
WeightAbout 300 grams
Compressive StrengthAC2kVrms/min
Insulation Resistance>100MΩ at DC500V
Dimension55(W)× 75(H)×120(L) mm
Installation Method35mm standard rail, base screw installation


Dimension (Unit: mm)

Dimension of DC current power transducer

Calibration Fine Tuning

DC current power transducer calibration fine tuning

PWR: Power indicator
SPAN: Calibration full scale potentiometer
ZERO: Zero potentiometer

Wiring

DC current power transducer wiring

Tips: Types of power transducers

Power transducers are classified into different types based on the electrical parameters they measure and their applications. The following are the main types of power transducers:

  • Based on power type: AC power transducers measure active power (kW), reactive power (kVAR), or apparent power (kVA) in AC electrical systems. They are used in industrial automation, power distribution, and energy monitoring. DC power transducers measure power in DC circuits, such as solar systems, battery monitoring, and electric vehicles, and are commonly used in applications such as telecommunications and railway traction systems.
  • Based on measurement parameters: Active power transducers measure active power in AC or DC circuits for energy monitoring and efficiency analysis. Reactive power transducers measure reactive power in AC circuits for power factor correction and reactive power compensation. Frequency transducers convert frequency changes into analog or digital outputs for generator monitoring and frequency stability applications.
  • Based on connection configuration: Single-phase power transducers are used in residential and small commercial applications to measure voltage, current, and power on a single-phase load. Three-phase power transducers are used in industrial and large distribution systems.
Product reviews
Pin Purpose
5
George
Avatar
4/10/2026 3:06 AM
I'm currently unsure about the purpose of pins 7 and 8; they appear to be open. Are they used to send feedback information to the controller?
Was this review helpful? Yes No (0/0)
ATO Responded
Pin 7 and 8 are spare signal output terminals. For single-output systems, pins 7 and 8 are left unconnected. For dual-output systems, pins 7 and 8 need to be connected to the output terminals.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The DC current transducer has low energy consumption and strong durability. It consumes about 3W in DC and about 4VA in AC. The compressive strength is AC2kVrms/min. The DC current transducer is small in size and easy to install. It is installed with 35mm standard rails or base screws and is suitable for different situations.

Specification

ModelATO-PT-HDB-DA
DC Input0-1A 0-5A, 0-10A, 75mV, customization (optional)
Input LoadCT of current transformer: ≤0.2VA
Allow OverloadCurrent×2 times the nominal value lasts
Current×10 times the nominal value 10s
Accuracy0.2, 0.5 (optional)
Response Time≤400ms
Output Channel1 channel, 2 channels, 3 channels (optional)
Output Voltage0-10V, 0-5V, 1-5V (load resistance = input voltage/10mAdc)
Output Current0-1mA, 0-10mA, 0-20mA, 4-20mA (Load resistance=10VDC/output current)
Other OutputRS485, customization
Output Ripple≤0.5% RO Peak-to-peak value
Work Environment Temperature and Humidity0~50℃/less than 80% relative humidity (non-condensing state)
Storage Conditions Temperature and Humidity-20~70℃/less than 70% relative humidity (non-condensing state)
Aux.power SupplyDC12V, DC24V, AC220V, DC220V, AC110V, DC110V, 2-wire circuit power supply (optional)
IsolationInput/output/power supply/shell
Power ConsumptionDC about 3W, AC about 4VA
Material of ShellABS fireproof material
WeightAbout 300 grams
Compressive StrengthAC2kVrms/min
Insulation Resistance>100MΩ at DC500V
Dimension55(W)× 75(H)×120(L) mm
Installation Method35mm standard rail, base screw installation


Dimension (Unit: mm)

Dimension of DC current power transducer

Calibration Fine Tuning

DC current power transducer calibration fine tuning

PWR: Power indicator
SPAN: Calibration full scale potentiometer
ZERO: Zero potentiometer

Wiring

DC current power transducer wiring

Tips: Types of power transducers

Power transducers are classified into different types based on the electrical parameters they measure and their applications. The following are the main types of power transducers:

  • Based on power type: AC power transducers measure active power (kW), reactive power (kVAR), or apparent power (kVA) in AC electrical systems. They are used in industrial automation, power distribution, and energy monitoring. DC power transducers measure power in DC circuits, such as solar systems, battery monitoring, and electric vehicles, and are commonly used in applications such as telecommunications and railway traction systems.
  • Based on measurement parameters: Active power transducers measure active power in AC or DC circuits for energy monitoring and efficiency analysis. Reactive power transducers measure reactive power in AC circuits for power factor correction and reactive power compensation. Frequency transducers convert frequency changes into analog or digital outputs for generator monitoring and frequency stability applications.
  • Based on connection configuration: Single-phase power transducers are used in residential and small commercial applications to measure voltage, current, and power on a single-phase load. Three-phase power transducers are used in industrial and large distribution systems.
Product reviews
Pin Purpose
5
George
Avatar
4/10/2026 3:06 AM
I'm currently unsure about the purpose of pins 7 and 8; they appear to be open. Are they used to send feedback information to the controller?
Was this review helpful? Yes No (0/0)
ATO Responded
Pin 7 and 8 are spare signal output terminals. For single-output systems, pins 7 and 8 are left unconnected. For dual-output systems, pins 7 and 8 need to be connected to the output terminals.
Only registered users can write reviews