The 1-phase AC current transducer can be used in an environment of 0~50℃ and relative humidity less than 80%, and the compressive strength can reach AC2kvrms/min. The accuracy of the single-phase AC current transducer is 0.2/0.5, and the input/output/power supply/shell are all isolated. The housing is made of ABS fireproof material, which is sturdy and durable.
Specification
| Model | ATO-PT-HDB-A1 |
| AC Current Input | 0-1A, 0-5A, 0-10A, 0-20A, customization (optional) |
| Input Load | CT of current transformer: ≤0.2VA |
| Allow Overload | Current×2 times the nominal value lasts Current×10 times the nominal value 10s |
| Accuracy | Average measurement, 0.5 True RMS measurement, 0.5 Average measurement, 0.2 True RMS measurement, 0.2 (optional) |
| Response Time | ≤400ms |
| Output Channel | 1 channel, 2 channels, 3 channels (optional) |
| Output Voltage | 0-10V, 0-5V, 1-5V (load resistance = input voltage/10mAdc) |
| Output Current | 0-1mA, 0-10mA, 0-20mA, 4-20mA (Load resistance=10VDC/output current) |
| Other Output | RS485, customization |
| Output Ripple | ≤0.5% RO Peak-to-peak value |
| Work Environment Temperature and Humidity | 0~50℃/less than 80% relative humidity (non-condensing state) |
| Storage Conditions Temperature and Humidity | -20~70℃/less than 70% relative humidity (non-condensing state) |
| Aux. power Supply | DC12V, DC24V, AC220V, DC220V, AC110V, DC110V, 2-wire circuit power supply (optional) |
| Isolation | Input/output/power supply/shell |
| Power Consumption | DC about 3W, AC about 4VA |
| Material of Shell | ABS fireproof material |
| Weight | About 300 grams |
| Compressive Strength | AC2kVrms/min |
| Insulation Resistance | >100MΩ at DC500V |
| Dimension | 55 (W)×75 (H)×120 (L) mm |
| Installation Method | 35mm standard rail, base screw installation |
Dimension (Unit: mm)

Calibration Fine Tuning

PWR: Power indicator
SPAN: Calibration full scale potentiometer
ZERO: Zero potentiometer
Wiring

Tips: Installation notes
- The input current of the single-phase AC current power transducer is within the specification range.
- Pay attention to whether the working power supply is correct and connected to the correct terminal. Be sure to wire according to the transmitter wiring diagram.
- The transmitter input is connected to the secondary output of CT.
Product reviews
Reliable and durable
Mark
9/15/2025 9:53 PM
I am currently using this current transducer, and it has proven to be highly reliable. Installation is simple and straightforward, and the measurement data is stable and accurate. It operates without generating heat, and the housing is sturdy and durable, giving me confidence in its long-term use.
Was this review helpful? (0/0)
Great AC current transducer
Sam
7/22/2026 7:02 PM
Great compact current transducer with standard 35mm rail mounting. Super easy to install and fits neatly inside my control cabinet. Fully isolated input, output and power sides effectively prevent signal interference.
Was this review helpful? (0/0)
Only registered users can write reviews