Automatic Transfer Switch, 3/4 Pole, 6 to 63 Amps

$188.92
$267.86
Low price and compact size dual power automatic transfer switch (ATS) with high-breaking mini circuit breaker, selectable rated operating current 6A, 10A, 16A, 20A, 25A, 32A, 40A, 63A, works at 400VAC 50Hz/ 60Hz power supply system, 3-pole or 4-pole ATS changeover switch, reliable automatic and manual operation, simple structure, easy operation and long service life.
SKU: ATO-ATS-063
*
*
*
Free Shipping
Delivery date: 6-12 days

Features

  • Suitable for 400V AC 50Hz power supply system with current ratings from 6 to 63 amps.
  • Automatic transfer switch is available with 3 Pole or 4 Pole.
  • ATS has overload, short circuit protection, and comes with function of output closing signal.
  • With the function of normal power ON, dual power OFF, standby power ON.
  • Adopting high performance micro circuit breaker, with circuit breaker breaking capacity and characteristics.
  • Simple structure, easy & reliable operation, no noise, small impact, and long service life
  • Suitable for the illuminating circuits of commercial buildings, shopping mall, banks, and high-rise buildings where the power supply can not be cut off for a long time.

Specification

ModelATO-GCQ2
Use CategoryAC-33iB
Rated Operational Voltage Ue
(Optional)
220V AC, 400V AC, 460V AC, 480V AC
Rated Operational Frequency50Hz/60Hz
Rated Operational Current Ie (Optional)6A, 10A, 16A, 20A, 25A, 32A, 40A, 63A
Switching Control Voltage220V AC
Rated Insulation Voltage Ui690V AC
Service LifeElectrical1,500 Times
Mechanical6,000 Times
Rated Short-circuit Making Capacity Icm7.5kA
Rated Ultimate Breaking Capacity Icu5kA
Transfer Action Time≤3s
Number of Poles (Optional)3-Pole or 4-Pole
Rated Impact Withstand Voltage8kV
Operation ModeAuto & Manual
Conversion MethodAuto switch and auto reset
Display FunctionLED indicator
EnvironmentAltitude< 2000m for the installation site
Ambient Temperature-5℃-+40℃, the average less than +35℃ for 24 hours
Relative HumidityRH≤ 50% at the maximum ambient temperature of +40℃;
Higher relative humidity is allowable under lower temperature, for example, RH could be 90% at +20℃.
(Please note that the measures shall be taken for the condensation occasionally with the temperature change.)
StandardsCompliance to IEC947-6-1, GB/T140848.11
Pollution DegreeClass 3
Mounting ConditionsIt shall be mounted on the place where has no impact and vibration, no snow and rain.
The upper terminals are connected to power source, and downside terminals are connected to the load.
The sloping angle against the vertical shall be less than 5°.
The outer magnetic field around the mounting site shall not exceed 5 times of earth field.
Weight2.3kg
DimensionsSee below

Dimensions
ATS Transfer Switch 6A-63A Dimensions

TypeOverall Dimensions (mm)Mounting Dimensions (mm)
LWHL1W1Hole
3-pole ATS185137118165122M6
4-pole ATS220137118196122M6

Details

6-63 Amps Automatic Transfer Switch Details

Wiring Diagram

• 3-Pole ATS
Note: For 3-Pole ATS transfer switch, the neutral lines of common power supply and standby power supply must be connected to the corresponding terminal 3 and terminal 6 respectively, otherwise the ATS can not be automatically switched.
3-Pole Automatic Transfer Switch Wiring Diagram

• 4-Pole ATS

4-Pole Auto Transfer Switch Wiring Diagram

• ATS Output Indicator Terminal Wiring Diagram
Automatic Transfer Switch Indicator Terminal Wiring

Tips: What's dual power automatic transfer switch?

The automatic transfer switch (ATS) is a switch to transfer between two power sources. It is constituted by one or several change-over switching equipment and other necessary apparatuses. It is used to detect the power circuit. In addition, it changes over one or several load circuits from one power supply to the other power supply.

For the use of dual power automatic transfer switch, briefly, it is connected with one utility power and one backup power. When the utility power suddenly fails, it will be transfer to the backup power supply automatically through the ATS (at the small load, the backup power supply can be supplied by the generator) to enable the equipment to operate normally. The most common application is the elevator, fire protection and monitoring. The condition is the same to the UPS uninterruptible power supply of the bank. However, its backup is the battery set. It is used in some factories and mines or units with loads of class I category and class II category.

In this video, it will show how ATO 4-pole automatic transfer switch changeover between the mains and standby power supplies in the manual & auto mode.

ATO.com have a wide range of selections with ratings from 6 amps to 800 amps. ATS transfer switch is a device to changeover between the utility and standby power source when one power fails. In this  video, ATO will show you disassembly of automatic transfer switch.

4-pole Automatic Transfer Switch for Emergency Power Supply

When the main power is cut off, the ATS can automatically switch to the backup generator power supply. Suitable for schools, hospitals, homes and other occasions.

Product reviews
Works as described.
5
Jacob
Avatar
6/12/2018 7:39 PM
I bought this 63 amp ATS for switching between the solar and main power at my house. First I tested this ATS for several times before installation. Works as described.
Was this review helpful? Yes No (1/0)
Good auto transfer switch
5
Walid
Avatar
6/20/2018 8:00 PM
The ATS is good. Just I had a little problem with installation, but it was solved with the help of customer service. Thanks.
Was this review helpful? Yes No (0/1)
This switch works as advertised.
4
James Martinez
Avatar
7/19/2018 12:33 AM
This auto transfer switch is easy to install and operate according to the instruction, but it is a little expansive. Nevertheless, this switch works as advertised.
Was this review helpful? Yes No (0/0)
ATO Responded
Dear Martinez, thanks a lot for your ordering on ATO.com. This ATS switch has its significant advantage, able to operated manually or automatically with monitoring function.  So, believe your choice and its high performance is worth this price. :) Of course, to get a discout, here are some methods for your reference: https://www.ato.com/get-a-discount.
Great ATS transfer switch
5
Albert
Avatar
1/16/2020 6:55 PM
Got a 4-pole transfer switch for my small generator with 40 Amp rating. As I like doing some arduino, It is simple to install and use. It works both in manual and automatic mode. Great product.
Was this review helpful? Yes No (0/0)
Do you provide 460v / 230v Automatic Transfer Switch?
5
Robin
Avatar
9/14/2020 7:03 PM
Do you provide 460v / 230v Automatic Transfer Switch?
Was this review helpful? Yes No (0/0)
ATO Responded
No, our ATS max operating voltage is 400V.
Works flawlessly
5
Stults
Avatar
6/29/2022 12:21 AM
This ATC works perfectly well with my project. The switch over is very fast with nothing going off. A very good device!
Was this review helpful? Yes No (0/0)
Some question of auto transfer switch data
5
natalia
Avatar
6/15/2023 2:38 AM
Hope you are doing well.
We’ve purchased a bulk quality of ATO for couple of ongoing projects and there is an query from our end customer about the input supply rating.
Customers incoming power supply
Was this review helpful? Yes No (0/0)
ATO Responded
The voltage of power supply can not exceed 400v, the voltage of 440v is too high.
We think that the voltage is too high and the internal relay has burned out.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Suitable for 400V AC 50Hz power supply system with current ratings from 6 to 63 amps.
  • Automatic transfer switch is available with 3 Pole or 4 Pole.
  • ATS has overload, short circuit protection, and comes with function of output closing signal.
  • With the function of normal power ON, dual power OFF, standby power ON.
  • Adopting high performance micro circuit breaker, with circuit breaker breaking capacity and characteristics.
  • Simple structure, easy & reliable operation, no noise, small impact, and long service life
  • Suitable for the illuminating circuits of commercial buildings, shopping mall, banks, and high-rise buildings where the power supply can not be cut off for a long time.

Specification

ModelATO-GCQ2
Use CategoryAC-33iB
Rated Operational Voltage Ue
(Optional)
220V AC, 400V AC, 460V AC, 480V AC
Rated Operational Frequency50Hz/60Hz
Rated Operational Current Ie (Optional)6A, 10A, 16A, 20A, 25A, 32A, 40A, 63A
Switching Control Voltage220V AC
Rated Insulation Voltage Ui690V AC
Service LifeElectrical1,500 Times
Mechanical6,000 Times
Rated Short-circuit Making Capacity Icm7.5kA
Rated Ultimate Breaking Capacity Icu5kA
Transfer Action Time≤3s
Number of Poles (Optional)3-Pole or 4-Pole
Rated Impact Withstand Voltage8kV
Operation ModeAuto & Manual
Conversion MethodAuto switch and auto reset
Display FunctionLED indicator
EnvironmentAltitude< 2000m for the installation site
Ambient Temperature-5℃-+40℃, the average less than +35℃ for 24 hours
Relative HumidityRH≤ 50% at the maximum ambient temperature of +40℃;
Higher relative humidity is allowable under lower temperature, for example, RH could be 90% at +20℃.
(Please note that the measures shall be taken for the condensation occasionally with the temperature change.)
StandardsCompliance to IEC947-6-1, GB/T140848.11
Pollution DegreeClass 3
Mounting ConditionsIt shall be mounted on the place where has no impact and vibration, no snow and rain.
The upper terminals are connected to power source, and downside terminals are connected to the load.
The sloping angle against the vertical shall be less than 5°.
The outer magnetic field around the mounting site shall not exceed 5 times of earth field.
Weight2.3kg
DimensionsSee below

Dimensions
ATS Transfer Switch 6A-63A Dimensions

TypeOverall Dimensions (mm)Mounting Dimensions (mm)
LWHL1W1Hole
3-pole ATS185137118165122M6
4-pole ATS220137118196122M6

Details

6-63 Amps Automatic Transfer Switch Details

Wiring Diagram

• 3-Pole ATS
Note: For 3-Pole ATS transfer switch, the neutral lines of common power supply and standby power supply must be connected to the corresponding terminal 3 and terminal 6 respectively, otherwise the ATS can not be automatically switched.
3-Pole Automatic Transfer Switch Wiring Diagram

• 4-Pole ATS

4-Pole Auto Transfer Switch Wiring Diagram

• ATS Output Indicator Terminal Wiring Diagram
Automatic Transfer Switch Indicator Terminal Wiring

Tips: What's dual power automatic transfer switch?

The automatic transfer switch (ATS) is a switch to transfer between two power sources. It is constituted by one or several change-over switching equipment and other necessary apparatuses. It is used to detect the power circuit. In addition, it changes over one or several load circuits from one power supply to the other power supply.

For the use of dual power automatic transfer switch, briefly, it is connected with one utility power and one backup power. When the utility power suddenly fails, it will be transfer to the backup power supply automatically through the ATS (at the small load, the backup power supply can be supplied by the generator) to enable the equipment to operate normally. The most common application is the elevator, fire protection and monitoring. The condition is the same to the UPS uninterruptible power supply of the bank. However, its backup is the battery set. It is used in some factories and mines or units with loads of class I category and class II category.

Product reviews
Works as described.
5
Jacob
Avatar
6/12/2018 7:39 PM
I bought this 63 amp ATS for switching between the solar and main power at my house. First I tested this ATS for several times before installation. Works as described.
Was this review helpful? Yes No (1/0)
Good auto transfer switch
5
Walid
Avatar
6/20/2018 8:00 PM
The ATS is good. Just I had a little problem with installation, but it was solved with the help of customer service. Thanks.
Was this review helpful? Yes No (0/1)
This switch works as advertised.
4
James Martinez
Avatar
7/19/2018 12:33 AM
This auto transfer switch is easy to install and operate according to the instruction, but it is a little expansive. Nevertheless, this switch works as advertised.
Was this review helpful? Yes No (0/0)
ATO Responded
Dear Martinez, thanks a lot for your ordering on ATO.com. This ATS switch has its significant advantage, able to operated manually or automatically with monitoring function.  So, believe your choice and its high performance is worth this price. :) Of course, to get a discout, here are some methods for your reference: https://www.ato.com/get-a-discount.
Great ATS transfer switch
5
Albert
Avatar
1/16/2020 6:55 PM
Got a 4-pole transfer switch for my small generator with 40 Amp rating. As I like doing some arduino, It is simple to install and use. It works both in manual and automatic mode. Great product.
Was this review helpful? Yes No (0/0)
Do you provide 460v / 230v Automatic Transfer Switch?
5
Robin
Avatar
9/14/2020 7:03 PM
Do you provide 460v / 230v Automatic Transfer Switch?
Was this review helpful? Yes No (0/0)
ATO Responded
No, our ATS max operating voltage is 400V.
Works flawlessly
5
Stults
Avatar
6/29/2022 12:21 AM
This ATC works perfectly well with my project. The switch over is very fast with nothing going off. A very good device!
Was this review helpful? Yes No (0/0)
Some question of auto transfer switch data
5
natalia
Avatar
6/15/2023 2:38 AM
Hope you are doing well.
We’ve purchased a bulk quality of ATO for couple of ongoing projects and there is an query from our end customer about the input supply rating.
Customers incoming power supply
Was this review helpful? Yes No (0/0)
ATO Responded
The voltage of power supply can not exceed 400v, the voltage of 440v is too high.
We think that the voltage is too high and the internal relay has burned out.
Only registered users can write reviews
Customers who bought this item also bought

Inclinometer Sensor, Output 4-20mA, ±10°~±180°

ATO-IMS-118128
$207.69
Low price inclinometer sensor for sale. Single axis/dual axis incline sensor, standard current 4-20mA output, optional measuring range ±10°/±30°/±60°/±90°/±180°, maximum accuracy 0.01°, wide voltage input 9-36V. Standard industrial tilt sensor, wide applications.

Automatic Transfer Switch, 3/4 Pole, 10/20 to 100 Amps

ATO-ATS-100
$436.85 $580.23
Intelligent automatic transfer switch (ATS), has rated current ranging from 10 amp to 100 amp (optional 10A, 16A, 20A, 32A, 40A, 50A, 63A, 80A, 100A), 3-pole or 4-pole, rated working voltage 400VAC 50Hz and adjustable 0-30s delay time. This intelligent ATS transfer switch features compact size and light weight, easy mounting & wiring, simple operation with microcomputer controller, best automatic and manual switching between normal power and standby power.