Automatic Transfer Switch, 3/4 Pole, 100/125 to 225 Amps

$574.61
$685.77
Affordable price intelligent automatic transfer switch with 3P or 4P circuit breaker, has optional operating current ratings from 100 amp, 125 amp to 225 amp, and rated working voltage 400V AC 50Hz. ATS transfer switch is equipped with microcomputer controller, easy and reliable operation with automatic and manual operation, adjustable 0-30s delay time, ideal for changeover between your common power supply and standby power supply like generator.
SKU: ATO-ATS-225
*
*
*
Free Shipping
Delivery date: 6-12 days

Features

  • Suitable for 400V AC 50Hz power supply system with rated working current 100A, 125A, 140A, 160A, 180A, 200A, 225A.
  • This ATS is an intelligent self-protection transfer switch mainly including two parts - microcomputer controller and transfer switch.
  • With automatic and manual operation, machinery and electrical double interlock feature.
  • ATS has three switching position for options: common power ON, dual power OFF, standby power ON.
  • Small size, light weight, stable performance, reliable operation and easy to use.
  • Applied for residential areas, military facilities, hospitals, shopping malls, airports and so on.

Specification

ModelATO-ZMQ2F/L-225
Frame Current225A
Rated Operating Current (Optional)100A, 125A, 140A, 160A, 180A, 200A, 225A
Number of Poles (Optional)3-pole4-pole
Breaking Current22kA30kA
Rated Operating Voltage400V AC
Insulation Voltage2500V, no flicker and no breakdown for one minute
Frequency50/60Hz
Delay Time0-30s (Adjustable)
Controller Rated Working Voltage230V AC
Mechanical Life5,000 times
Structural Type (Optional)Integral type (F) or split type (L)
EnvironmentAltitude≤2000m
Ambient Temperature-5℃~+40℃, the 24-hour average temperature does not exceed +35℃
Relative HumidityRH≤50% @ +40℃; at a lower temperature, it is allowable to have a higher humidity.
Please pay more attention to the condensation produced on the product surface with the change of humidity.
InstallationNo explosive medium, and no medium of gas and dust is enough to corrode and damage the insulation.
No significant shock and vibration.
StandardsCompliance to IEC6094-6-1, GB14048.11-2008
Protection ClassIP30
Weight10.2kg11.5kg
DimensionsSee below

Details

225 Amps Automatic Transfer Switch Details

ATS Dimensions (Unit: mm)

225 Amp Automatic Transfer Switch Dimensions

TypeWW1LL1H
ZMQ2F/L-225/3P430395215195140
ZMQ2F/L-225/4P545510215195140

Wiring Diagram
3-Pole or 4-Pole 225A Automatic Transfer Switch Wiring Diagram
* The above wiring diagram is just for your reference. With the different types and functions, the wiring is also different.
* When the fire takes place, EPS signal is on (provided by firefighting center) and the circuit breakers Q1 & Q2 is released or cut off.
* Q1 & Q2 refer to circuit breakers.
* KG refers to the wiring terminals.
* The R & N power ON indicator lamps are external (provided by users).
* The dashed part is supplied by users.

ATS Transfer Switch Wiring

* 3P refers to 3-pole circuit breaker and 4P means 4-pole circuit breaker.
* 24VDC (external) is supplied by the fire control center.

Tips: Structure of automatic transfer switch

The automatic switch has a wide range of applications, such as elevators, banks and hospitals, where the power failure is absolutely unwanted. Once the power is cut off, it will cause huge economic losses and even endanger human safety.

The automatic switch is mainly composed of a controller, a conversion mechanism and a body. The controller is very important, which is the same as the brain of the automatic changeover switch. It can control the switching between the two power sources. The conversion mechanism is composed of a drive mechanism and a transmission mechanism. Its role is to achieve non-stop disconnection and connection, and also determine the mechanical reliability of the automatic transfer switch. As for the body of ATS transfer switch, it is composed of contacts, contact mechanism and arc extinguisher, which directly determines the switch electrical characteristics.

ATO.com have a wide range of selections with ratings from 6 amps to 800 amps. ATS transfer switch is a device to changeover between the utility and standby power source when one power fails. In this  video, ATO will show you disassembly of automatic transfer switch.

Product reviews
Good automatic transfer switch
5
Manu
Avatar
1/3/2019 7:30 PM
The auto transfer switch was fast delivered and well-packed. When I received this unit, I first tested it with my generator. This unit did work. The installation was OK, not complex. Good products.
Was this review helpful? Yes No (0/0)
Looking for 110-240V AC automatic transfer switch
5
Johnny
Avatar
11/4/2020 6:17 PM
Hi. Do you provide automatic transfer switch with working voltage of 110-240V AC (split type) ?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, Johnny. We are sorry we do Not provide 110-240V split type, and our ATS is 3-phase, 380/400V only.
I have a question about the connection of your ATS controller.
5
Dunn
Avatar
1/13/2022 6:51 PM
I have a question regarding connection of ATS of your type zmq5 160amps. In electrical control connection does it require additional connection to be automatic? Please kindly urgently reply to my question.
Was this review helpful? Yes No (0/0)
ATO Responded
No additional connections are required for being automatic. Just select type 1 for ATS controller model, which means full auto, so:
When normal power is off, the ATS will automatically transfer to standby power.
When normal power recovers, ATS will auto-transfer back to normal power.
Perfect Transfer!
5
Mar
Avatar
6/29/2022 8:42 PM
I bought a auto transfer switch for my RV, the switch is easy to install, easy to use, with nice price and works flawlessly.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Suitable for 400V AC 50Hz power supply system with rated working current 100A, 125A, 140A, 160A, 180A, 200A, 225A.
  • This ATS is an intelligent self-protection transfer switch mainly including two parts - microcomputer controller and transfer switch.
  • With automatic and manual operation, machinery and electrical double interlock feature.
  • ATS has three switching position for options: common power ON, dual power OFF, standby power ON.
  • Small size, light weight, stable performance, reliable operation and easy to use.
  • Applied for residential areas, military facilities, hospitals, shopping malls, airports and so on.

Specification

ModelATO-ZMQ2F/L-225
Frame Current225A
Rated Operating Current (Optional)100A, 125A, 140A, 160A, 180A, 200A, 225A
Number of Poles (Optional)3-pole4-pole
Breaking Current22kA30kA
Rated Operating Voltage400V AC
Insulation Voltage2500V, no flicker and no breakdown for one minute
Frequency50/60Hz
Delay Time0-30s (Adjustable)
Controller Rated Working Voltage230V AC
Mechanical Life5,000 times
Structural Type (Optional)Integral type (F) or split type (L)
EnvironmentAltitude≤2000m
Ambient Temperature-5℃~+40℃, the 24-hour average temperature does not exceed +35℃
Relative HumidityRH≤50% @ +40℃; at a lower temperature, it is allowable to have a higher humidity.
Please pay more attention to the condensation produced on the product surface with the change of humidity.
InstallationNo explosive medium, and no medium of gas and dust is enough to corrode and damage the insulation.
No significant shock and vibration.
StandardsCompliance to IEC6094-6-1, GB14048.11-2008
Protection ClassIP30
Weight10.2kg11.5kg
DimensionsSee below

Details

225 Amps Automatic Transfer Switch Details

ATS Dimensions (Unit: mm)

225 Amp Automatic Transfer Switch Dimensions

TypeWW1LL1H
ZMQ2F/L-225/3P430395215195140
ZMQ2F/L-225/4P545510215195140

Wiring Diagram
3-Pole or 4-Pole 225A Automatic Transfer Switch Wiring Diagram
* The above wiring diagram is just for your reference. With the different types and functions, the wiring is also different.
* When the fire takes place, EPS signal is on (provided by firefighting center) and the circuit breakers Q1 & Q2 is released or cut off.
* Q1 & Q2 refer to circuit breakers.
* KG refers to the wiring terminals.
* The R & N power ON indicator lamps are external (provided by users).
* The dashed part is supplied by users.

ATS Transfer Switch Wiring

* 3P refers to 3-pole circuit breaker and 4P means 4-pole circuit breaker.
* 24VDC (external) is supplied by the fire control center.

Tips: Structure of automatic transfer switch

The automatic switch has a wide range of applications, such as elevators, banks and hospitals, where the power failure is absolutely unwanted. Once the power is cut off, it will cause huge economic losses and even endanger human safety.

The automatic switch is mainly composed of a controller, a conversion mechanism and a body. The controller is very important, which is the same as the brain of the automatic changeover switch. It can control the switching between the two power sources. The conversion mechanism is composed of a drive mechanism and a transmission mechanism. Its role is to achieve non-stop disconnection and connection, and also determine the mechanical reliability of the automatic transfer switch. As for the body of ATS transfer switch, it is composed of contacts, contact mechanism and arc extinguisher, which directly determines the switch electrical characteristics.

Product reviews
Good automatic transfer switch
5
Manu
Avatar
1/3/2019 7:30 PM
The auto transfer switch was fast delivered and well-packed. When I received this unit, I first tested it with my generator. This unit did work. The installation was OK, not complex. Good products.
Was this review helpful? Yes No (0/0)
Looking for 110-240V AC automatic transfer switch
5
Johnny
Avatar
11/4/2020 6:17 PM
Hi. Do you provide automatic transfer switch with working voltage of 110-240V AC (split type) ?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, Johnny. We are sorry we do Not provide 110-240V split type, and our ATS is 3-phase, 380/400V only.
I have a question about the connection of your ATS controller.
5
Dunn
Avatar
1/13/2022 6:51 PM
I have a question regarding connection of ATS of your type zmq5 160amps. In electrical control connection does it require additional connection to be automatic? Please kindly urgently reply to my question.
Was this review helpful? Yes No (0/0)
ATO Responded
No additional connections are required for being automatic. Just select type 1 for ATS controller model, which means full auto, so:
When normal power is off, the ATS will automatically transfer to standby power.
When normal power recovers, ATS will auto-transfer back to normal power.
Perfect Transfer!
5
Mar
Avatar
6/29/2022 8:42 PM
I bought a auto transfer switch for my RV, the switch is easy to install, easy to use, with nice price and works flawlessly.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Automatic Transfer Switch, 3/4 Pole, 630/700/800 Amps

ATO-ATS-800
$1,486.98 $1,599.21
Reliable intelligent automatic transfer switch with microcomputer controller is best ATS for changeover between common-used power and standby power at rated working current 630 amp, 700 amp or 800 amp and rated voltage 400VAC 50Hz, adjustable 0~30s delay time, simple wiring and easy installation, high performance and long service life, suitable for residential areas, military facilities, hospitals and other areas.