7.5 kW Air Cooled CNC Spindle Motor, 18000 rpm, ER32

$1,076.92
7.5 kW air cooled spindle motor for sales, it features 18000 rpm high speed, 3.58 Nm torque, ER32 collet, 3 phase 380V AC at 300Hz, high quality 4pcs bearings, IP50 for protection grade, used in CNC drilling and milling equipment.
SKU: ATO-SPINDLE-A7500
*
Free Shipping
Delivery date: 6-12 days

7.5 kW CNC spindle motor for sale at good price, 18000 rpm speed, 3.58 Nm torque, 300Hz frequency, 3 phase 380V AC operating voltage, ER32 (φ3.175 mm - φ20 mm) collet.

Feature

  • Spindle motor with air cooling fan and ER32 collet ensures smooth running.
  • Fast response, strong overload capacity, low noise, and high mechanical precision.
  • High-quality 4 pcs bearings (7008Cx2 + 7004Cx2), runout off less than 0.01mm, tapered bore less than 0.005mm.
  • P4 grade ceramic ball bearings are used as spindle bearings, which improves the service life under high-speed revolution.
  • Lubricated with grease, which is resistant to 200 degrees high temperature.
  • Tight sealing and two-layer dustproof design.

Application

This series of air-cooled electric spindle motors is designed primarily for use with variable frequency drives or engraving machines, as well as CNC routers. It is ideal for high-speed profiling, drilling, cutting, engraving, and groove milling across a variety of materials, including wood, metal, plastics, foam, and rubber.

Note: Ensure that the spindle motor and VFD are compatible. The VFD’s specifications and parameter settings must align with the spindle motor’s nominal parameters. Incorrect settings can lead to spindle motor damage or burnout.

Specification

ModelSTF60-103-7.5
Matched VFD ModelGK3000-4T00110G (15 hp three phase VFD)
GK3000-CS00110G (15 hp 1-phase 220V to 3-phase 380V VFD)
Power7.5 kW
PhaseThree phase
Speed18000 rpm
Voltage3-phase 380V±10% AC
Note: (The default voltage of the matching VFD is consistent with the motor voltage)
Current15.3A
Frequency300Hz
Torque3.58 Nm
Number of Pole2 poles
Cooling TypeAir-cooled
Installation MethodHorizontally or Vertically (When the motor is installed, the radial runout standard is required to be within 5um, and the chuck is generally 10um-15um.)
LubricationGrease
Thermal ClassClass F
Protection ClassIP50
CertificationCE
WarrantyBearings for half a year, other parts for one year
Joint of NoseER32 (φ3.175 mm - φ20 mm)
Bearings Type7008C P4*2 & 7004C P4*2
ApplicationWoodworking & Plastic
Weight16 kg
PDFDownload Attachments7.5kW Air Cooled Spindle Motor CAD Drawings

Details

4500W Air Cooled CNC Spindle Motor Details

Tips: How to Choose the Right VFD Matching Spindle Motor?

Variable frequency drive adopts frequency conversion technology and micro-electronic technology, by changing the working power frequency of the spindle motor, so as to achieve the purpose of energy-saving speed regulation. The selection of frequency inverter should match the voltage, power and frequency of the spindle motor to maximize its utility.

  1. Set the VFD reference frequency. The reference frequency of the VFD is set according to the highest frequency of the motorized spindle. If the reference frequency of the VFD is not set, the spindle motor will burn out immediately after it starts running.
  2. The maximum frequency, rotation frequency and corresponding voltage of the VFD are set according to the curve in the instruction.
  3. The current of the VFD is set according to the rated current of the spindle motor.
  4. Set the overload current to 120% of the rated current of the spindle motor.
  5. Set the overload trip level to 100% and the overload trip time to 5s. Carrier frequency Settings are related to spindle motor power, with spindle motors less than 10 kW set at 8 KHz, spindle motors over 10 kW set at 5 KHz, and acceleration and deceleration times set at 10 S-20s. When the starting current exceeds the rated current protection, the acceleration time should be extended.
  6. After the power is switched on, VFD starts to observe whether the rotation direction of the spindle motor is consistent with the direction indicated by the motorized spindle. If the rotation direction is inconsistent, the power supply should be cut off immediately, and check the three-phase power mode connected with the inverter and spindle motor. It is strictly prohibited to run the spindle motor wrong in the direction of rotation.

Safety Tips for Using ATO CNC Spindle Motors

1. The electric spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor, and it will burn the spindle motor if the settings are not correct.

2. Before using water-cooled spindle motor, it shall ensure that cooling cycle system works normally and the running under no cooling conditions is prohibited. The volume of cooling water is calculated as per 1 liter/minute, the minimum flow of cooling water is not less than 5 liter/minute, cooling water pipe and the nozzle shall be connected reliably and there is no leakage.

3. The cooling liquid shall be clean and free of grease and the temperature shall be within 5-30℃. The cooling medium shall carry out force cooling when the ambient temperature is higher than 30℃. The precision lathe requires the cooling liquid with a constant temperature of 20 +/-2℃.

4. During storage and transport of the spindle motor, the status of high-speed grease inside the bearing will change. The user shall run it at a low speed first by starting from the lowest speed of the spindle motor for 30 minutes and then 20 minutes for every 3000 rounds. Otherwise there will have abnormal sound, noise, heat and other phenomena, which will affect the bearing life if the spindle motor is started directly at a high speed. During long term storage, the spindle motor shall run (at low speed) for 15-30 minutes once a week at least.

5. Collet, nut and inner taper hole shall be washed clean when installing blades on the spindle motor in order to avoid any impact on the precision. The blade handle shall be inserted into the collet more than 15mm.

6. For daily machining, the spindle motor shall be warmed up, run for 15-20 minutes when the machining speed is reached and then performs precise machining. It is better to stop the spindle motor for two hours every day in order to recover its mechanical fatigue and prolong its life time.

7. No knocking the end cover of the spindle motor. No hammering the collet and blade head when removing blades. No shocking or colliding during transport, storage and using, especially the end of the spindle motor.

8. The spindle motor shall run in designated direction.

9. The spindle motor shall be installed and fixed according to the relevant drawings and instructions.

10. The temperature shall be within 22-25℃ if water cooling machine is used.

11. The spindle motor adopts vapor lock and the gas source shall not be used until it has passed oil-water separator and dry filter. The air pressure is 0.2-0.25Mpa and the filtering precision is 5μm, otherwise there will cause damages to the bearing.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Good 7.5kW air cooled CNC spindle motor
5
Craig
Avatar
7/13/2021 1:45 AM
Do you proivde cables / connectors to connect your CNC spindle motor with your VFD?
Was this review helpful? Yes No (0/0)
ATO Responded
We do not provide cables, but we will provide the cables connectors, and the female connector, so you just need to solder the cables.
High quality 7.5kw air cooled spindle motor
5
Rojas
Avatar
2/7/2023 6:37 PM
This is a high-quality air cooled spindle motor, I used it for a CNC machine. So far it works well. I would recommend it to my friends.
Was this review helpful? Yes No (0/0)
For steel
4
Pillai
Avatar
7/20/2026 1:27 AM
Can't this spindle motor mill steel?
Was this review helpful? Yes No (0/0)
ATO Responded
This air-cooled spindle motor, ATO-SPINDLE-A7500, is only suitable for processing materials such as wood and aluminum.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

7.5 kW CNC spindle motor for sale at good price, 18000 rpm speed, 3.58 Nm torque, 300Hz frequency, 3 phase 380V AC operating voltage, ER32 (φ3.175 mm - φ20 mm) collet.

Feature

  • Spindle motor with air cooling fan and ER32 collet ensures smooth running.
  • Fast response, strong overload capacity, low noise, and high mechanical precision.
  • High-quality 4 pcs bearings (7008Cx2 + 7004Cx2), runout off less than 0.01mm, tapered bore less than 0.005mm.
  • P4 grade ceramic ball bearings are used as spindle bearings, which improves the service life under high-speed revolution.
  • Lubricated with grease, which is resistant to 200 degrees high temperature.
  • Tight sealing and two-layer dustproof design.

Application

This series of air-cooled electric spindle motors is designed primarily for use with variable frequency drives or engraving machines, as well as CNC routers. It is ideal for high-speed profiling, drilling, cutting, engraving, and groove milling across a variety of materials, including wood, metal, plastics, foam, and rubber.

Note: Ensure that the spindle motor and VFD are compatible. The VFD’s specifications and parameter settings must align with the spindle motor’s nominal parameters. Incorrect settings can lead to spindle motor damage or burnout.

Specification

ModelSTF60-103-7.5
Matched VFD ModelGK3000-4T00110G (15 hp three phase VFD)
GK3000-CS00110G (15 hp 1-phase 220V to 3-phase 380V VFD)
Power7.5 kW
PhaseThree phase
Speed18000 rpm
Voltage3-phase 380V±10% AC
Note: (The default voltage of the matching VFD is consistent with the motor voltage)
Current15.3A
Frequency300Hz
Torque3.58 Nm
Number of Pole2 poles
Cooling TypeAir-cooled
Installation MethodHorizontally or Vertically (When the motor is installed, the radial runout standard is required to be within 5um, and the chuck is generally 10um-15um.)
LubricationGrease
Thermal ClassClass F
Protection ClassIP50
CertificationCE
WarrantyBearings for half a year, other parts for one year
Joint of NoseER32 (φ3.175 mm - φ20 mm)
Bearings Type7008C P4*2 & 7004C P4*2
ApplicationWoodworking & Plastic
Weight16 kg
PDFDownload Attachments7.5kW Air Cooled Spindle Motor CAD Drawings

Details

4500W Air Cooled CNC Spindle Motor Details

Tips: How to Choose the Right VFD Matching Spindle Motor?

Variable frequency drive adopts frequency conversion technology and micro-electronic technology, by changing the working power frequency of the spindle motor, so as to achieve the purpose of energy-saving speed regulation. The selection of frequency inverter should match the voltage, power and frequency of the spindle motor to maximize its utility.

  1. Set the VFD reference frequency. The reference frequency of the VFD is set according to the highest frequency of the motorized spindle. If the reference frequency of the VFD is not set, the spindle motor will burn out immediately after it starts running.
  2. The maximum frequency, rotation frequency and corresponding voltage of the VFD are set according to the curve in the instruction.
  3. The current of the VFD is set according to the rated current of the spindle motor.
  4. Set the overload current to 120% of the rated current of the spindle motor.
  5. Set the overload trip level to 100% and the overload trip time to 5s. Carrier frequency Settings are related to spindle motor power, with spindle motors less than 10 kW set at 8 KHz, spindle motors over 10 kW set at 5 KHz, and acceleration and deceleration times set at 10 S-20s. When the starting current exceeds the rated current protection, the acceleration time should be extended.
  6. After the power is switched on, VFD starts to observe whether the rotation direction of the spindle motor is consistent with the direction indicated by the motorized spindle. If the rotation direction is inconsistent, the power supply should be cut off immediately, and check the three-phase power mode connected with the inverter and spindle motor. It is strictly prohibited to run the spindle motor wrong in the direction of rotation.
Product reviews
Good 7.5kW air cooled CNC spindle motor
5
Craig
Avatar
7/13/2021 1:45 AM
Do you proivde cables / connectors to connect your CNC spindle motor with your VFD?
Was this review helpful? Yes No (0/0)
ATO Responded
We do not provide cables, but we will provide the cables connectors, and the female connector, so you just need to solder the cables.
High quality 7.5kw air cooled spindle motor
5
Rojas
Avatar
2/7/2023 6:37 PM
This is a high-quality air cooled spindle motor, I used it for a CNC machine. So far it works well. I would recommend it to my friends.
Was this review helpful? Yes No (0/0)
For steel
4
Pillai
Avatar
7/20/2026 1:27 AM
Can't this spindle motor mill steel?
Was this review helpful? Yes No (0/0)
ATO Responded
This air-cooled spindle motor, ATO-SPINDLE-A7500, is only suitable for processing materials such as wood and aluminum.
Only registered users can write reviews
Customers who bought this item also bought

15 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

GK3000-CS0110G
$1,587.36
Customized 15 hp VFD at best price, with single phase 220v/ 230v/ 240v input, three phase 380v/ 400v/ 415v output. Using it as frequency converter to control AC motor speed.