5 kVA Single Phase Automatic Voltage Stabilizer for Home with features like automatic restart, turn-on delay, time-delay system and high & low voltage cut-off that provide efficient and reliable protection for home electronic appliances against voltage problems.
Specifications
| Product Name | Automatic Voltage Stabilizer | ||||
| Model Number | ATOSVC-5000 | ||||
| Technology | Relay Control System + Programmed control computerized + control algorithm relay "Cross zero" | ||||
| Capacity | 5 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power) | ||||
| Phase | Single Phase | ||||
| Input Voltage Range | ±15% tolerance of output voltage | ||||
| Output Voltage | 220V±3%/ 230V±3%/ 240V±3%/ 110V±3% | ||||
| Adjust Time | <1sec. (Against 10% input voltage deviation) | ||||
| Frequency | 50Hz/60Hz | ||||
| Current Type | AC | ||||
| Protection Over Voltage | <250±2V | ||||
| Protection Lack Voltage | <185±2V | ||||
| Ambient Temperature | -10°C~+40°C | ||||
| Insulation Resistance | ≥5MΩ | ||||
| Temperature Protection | 110℃±10℃ | ||||
| Relative Humidity | <90% | ||||
| Wave Form Distortion | No additional waveform distortion | ||||
| Efficiency | >95% | ||||
| Display | LED | ||||
| Protection Grade | IP20 | ||||
| Dielectric Strength | 1500V/min | ||||
| Certification | CE, RoHS | ||||
| Warranty Period | 12 months | ||||
| Weight | 14 Kg | ||||
| Size | LxWxH=470x240x190mm | ||||
| Note: The provided 5 kVA voltage stabilizer is 1-phase (L, N, G) by European standards. We can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering. | |||||
Details

4 tips for maintenance of a voltage stabilizer
- The voltage stabilizer should be placed in well-ventilated and dry indoors, without direct sunlight or corrosive gas.
- The voltage stabilizer power should be larger than the total power of all power consumption equipment.
- The voltage stabilizer switch can't be used as the master switch of devices. Turn on the voltage stabilizer switch first, then connect different power consumption equipment by increasing the order of power as there's power output. When turning off devices, follow a decreasing order of power and turn off the voltage stabilizer switch at last.
- The voltage stabilizer switch shall not be turned off frequently, the interval between two turn-ons shall not be more than 10 seconds, otherwise, the voltage stabilizer would be protected by mistake, or even damaged.
Product reviews
Will buy a 5kVA voltage stabilizer with 120V output
Metie
9/5/2019 7:40 PM
Can you provide 5kVA Automatic Voltage Stabilizer with 120V output voltage? I would like to buy one for home applicances.
Was this review helpful? (0/0)
High quality and good price
Timbo
10/9/2019 3:24 AM
Not much to say. I plugged it in and trust my voltage is regulated. I have my PC, TV and entertainment set up connected to this voltage stabilizer and it works well. For the price point this unit does very well! Highly recommend it.
Was this review helpful? (0/0)
Can you provide a 5kW automatic voltage stabilizer with 120V output voltage?
Roby
1/21/2022 1:31 AM
Can you provide a 5kW automatic voltage stabilizer with 120V output voltage?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
3 kVA Single Phase Automatic Voltage Stabilizer for Home
ATO-AVS-1P3K
$493.48
Best 3 kVA single phase voltage stabilizer for home use, owns the wide input voltage range 140V to 260V, light in weight, delay output, little wave distortion, and reliable. This LED relay type full automatic AC voltage stabilizer adopts international advanced technology and intelligent CPU centralized control technology.