10 kVA Single Phase Automatic Voltage Stabilizer for Home

$1,082.36
Single phase 10 kVA automatic voltage stabilizer, features automatic restart, turn-on delay, time-delay system and high & low voltage cut-off that provide efficient and reliable protection for home electronic appliances against voltage problems.
SKU: ATO-AVS-1P10K
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-16 days

Cheap and high quality 10 kVA Single Phase AC Automatic Voltage Stabilizer for Home used with input voltage range 95-125V/ 190-250V, 110V±3%/ 220V±3% output voltage, easy to install and operate, protects the equipment or electronic appliances against voltage fluctuation.

Specifications

Product NameAutomatic Voltage Stabilizer
Model NumberATOSVC-10000VA
TechnologyRelay Control System+Programmed control computerized+control algorithm relay"Cross zero"
Capacity10 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
PhaseSingle Phase
Input Voltage Range±15% tolerance of output voltage
Output Voltage*220V±3%/ 230V±3%/ 240V±3%/ 110V±3% (Optional)
Adjust Time<1sec. (Against 10% input voltage deviation)
Frequency50Hz/60Hz
Current TypeAC
Protection Over Voltage<250±2V
Protection Lack Voltage<185±2V
Ambient Temperature-10°C~+40°C
Insulation Resistance≥5MΩ
Temperature Protection110℃±10℃
Relative Humidity<90%
Wave Form DistortionNo additional waveform distortion
Efficiency>95%
DisplayLED
Protection GradeIP20
Dielectric Strength1500V/min
CertificationCE, RoHS
Warranty Period12 months
Weight28 Kg/ 70 Kg
SizeLxWxH=580x300x270mm
Note: The provided 10 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. And we can customize the split phase (L1, L2 + G) like USA standard ("G" can only be grounded), just confirm with us by email after ordering.

Details

10 KVA Single Phase Automatic Voltage Stabilizer Details

Tips: Safety device of the voltage stabilizer

The voltage stabilizer below 3 kVA uses a fuse for overload or short circuit protection, and the AC voltage stabilizer above 5 kVA uses a small circuit breaker or small air switch for overload or short circuit protection. When the voltage stabilizer is working, if fuse is blown or the automatic air circuit breaker trips, it should be shut down to check the load and the voltage stabilizer.
Visit blog post Safety Tips for Using Voltage Stabilizer.

In this video ATO uses a voltage regulator and multimeter to test the output voltage of the 3 kva voltage stabilizer which has 140V to 270V AC input, 220V AC output. After testing, we may see that the output voltage is within 220V ± 6%, which is in line with the standard.

A voltage stabilizer is a device that automatically adjusts the output voltage to stabilize it. ATO will show you how to test a voltage regulator.

Product reviews
Everything works as advertised
5
Azbard
Avatar
1/7/2020 7:04 PM
Got this voltage stabilizer for my 220V grinder mixer from India. Used twice with no problem. So far I like it very much. Hope it will continue. No noise, very impressed with the quietness.
Was this review helpful? Yes No (0/0)
Need your help before buying
5
Earl Smith
Avatar
5/24/2020 8:04 PM
I'm at a plant in CHicago where we have really wonky input voltages. My 120Vac outlets measure at about 138Vac. ConEd can't do anything about it. I'm trying to run a servo motor that needs 120V /- 10%. I'd like 10kva but could probably live with 5 kva 138V input 120V AC output. Can you help?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, based on your requirements, here is the recommended voltage stabilizer:
Power capacity: 10kVA voltage stabilizer.
Input: 1-phase, 120-140V.
Output: 1-phase, 120V.
Input Voltage Range ±15% tolerance of output voltage
5
Lisa
Avatar
1/19/2023 3:46 AM
Hello, please tell me maximum input voltage for 1phase and output 240v /-3% ?
Was this review helpful? Yes No (0/0)
ATO Responded
ATO voltage stabilizer input voltage is ±15% of the output voltage, so when choose 240V output, the maximum input voltage is 276V.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cheap and high quality 10 kVA Single Phase AC Automatic Voltage Stabilizer for Home used with input voltage range 95-125V/ 190-250V, 110V±3%/ 220V±3% output voltage, easy to install and operate, protects the equipment or electronic appliances against voltage fluctuation.

Specifications

Product NameAutomatic Voltage Stabilizer
Model NumberATOSVC-10000VA
TechnologyRelay Control System+Programmed control computerized+control algorithm relay"Cross zero"
Capacity10 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
PhaseSingle Phase
Input Voltage Range±15% tolerance of output voltage
Output Voltage*220V±3%/ 230V±3%/ 240V±3%/ 110V±3% (Optional)
Adjust Time<1sec. (Against 10% input voltage deviation)
Frequency50Hz/60Hz
Current TypeAC
Protection Over Voltage<250±2V
Protection Lack Voltage<185±2V
Ambient Temperature-10°C~+40°C
Insulation Resistance≥5MΩ
Temperature Protection110℃±10℃
Relative Humidity<90%
Wave Form DistortionNo additional waveform distortion
Efficiency>95%
DisplayLED
Protection GradeIP20
Dielectric Strength1500V/min
CertificationCE, RoHS
Warranty Period12 months
Weight28 Kg/ 70 Kg
SizeLxWxH=580x300x270mm
Note: The provided 10 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. And we can customize the split phase (L1, L2 + G) like USA standard ("G" can only be grounded), just confirm with us by email after ordering.

Details

10 KVA Single Phase Automatic Voltage Stabilizer Details

Tips: Safety device of the voltage stabilizer

The voltage stabilizer below 3 kVA uses a fuse for overload or short circuit protection, and the AC voltage stabilizer above 5 kVA uses a small circuit breaker or small air switch for overload or short circuit protection. When the voltage stabilizer is working, if fuse is blown or the automatic air circuit breaker trips, it should be shut down to check the load and the voltage stabilizer.
Visit blog post Safety Tips for Using Voltage Stabilizer.

Product reviews
Everything works as advertised
5
Azbard
Avatar
1/7/2020 7:04 PM
Got this voltage stabilizer for my 220V grinder mixer from India. Used twice with no problem. So far I like it very much. Hope it will continue. No noise, very impressed with the quietness.
Was this review helpful? Yes No (0/0)
Need your help before buying
5
Earl Smith
Avatar
5/24/2020 8:04 PM
I'm at a plant in CHicago where we have really wonky input voltages. My 120Vac outlets measure at about 138Vac. ConEd can't do anything about it. I'm trying to run a servo motor that needs 120V /- 10%. I'd like 10kva but could probably live with 5 kva 138V input 120V AC output. Can you help?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, based on your requirements, here is the recommended voltage stabilizer:
Power capacity: 10kVA voltage stabilizer.
Input: 1-phase, 120-140V.
Output: 1-phase, 120V.
Input Voltage Range ±15% tolerance of output voltage
5
Lisa
Avatar
1/19/2023 3:46 AM
Hello, please tell me maximum input voltage for 1phase and output 240v /-3% ?
Was this review helpful? Yes No (0/0)
ATO Responded
ATO voltage stabilizer input voltage is ±15% of the output voltage, so when choose 240V output, the maximum input voltage is 276V.
Only registered users can write reviews