3 kVA Single Phase Automatic Voltage Stabilizer for Home

$493.48
Best 3 kVA single phase voltage stabilizer for home use, owns the wide input voltage range 140V to 260V, light in weight, delay output, little wave distortion, and reliable. This LED relay type full automatic AC voltage stabilizer adopts international advanced technology and intelligent CPU centralized control technology.
SKU: ATO-AVS-1P3K
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-16 days

3000 VA Single Phase Automatic Voltage Stabilizer from ATO has an input voltage range of 140V to 260V, which means if the input voltage is between 140V to 260V, it will stabilize it to the regular voltage of about 220V-230V. If the voltage is below 140V or higher than 260V, it will just cut off the appliance from mains.

Specifications

Product NameAutomatic Voltage Stabilizer
Model NumberATOTND-3000
TechnologyRelay Control System + Programmed control computerized + control algorithm relay "Cross zero"
Capacity3 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
PhaseSingle Phase
Input Voltage Range±15% tolerance of output voltage
Output Voltage220V±3%/ 230V±3%/ 240V±3%/ 110V±3%
Adjust Time<1sec. (Against 10% input voltage deviation)
Frequency50Hz/60Hz
Current TypeAC
Protection Over Voltage<250±2V
Protection Lack Voltage<185±2V
Ambient Temperature-10°C~+40°C
Insulation Resistance≥5MΩ
Temperature Protection110℃±10℃
Relative Humidity<90%
Wave Form DistortionNo additional waveform distortion
Efficiency>95%
DisplayLED
Protection GradeIP20
Dielectric Strength1500V/min
CertificationCE, RoHS
Warranty Period12 months
Weight12 Kg
SizeLxWxH=300x250xx220mm
Note: The provided 3 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. And we can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering.

Details

3KVA Single Phase Automatic Voltage Stabilizer Details

Tips: How to select a household voltage stabilizer

  1. AC stabilized voltage supply takes the output apparent power (kVA) as its nominal rated capacity. But in general, the loads are not pure resistors, namely the power factor COS¢≠1, so the active power (kW) actually output by the voltage stabilizer is equal to the capacity (kVA)*COS¢.
  2. In actual selection, the stabilized voltage supply shall be reasonably selected according to specific conditions of the power consumption equipment, such as its rated power, power factor and load types. A proper allowance shall be kept for the output power, particularly, the allowance shall be larger for the selection of an impulse load.
  3. Pure resistive load devices, such as filament lamps, resistance wires, and electric furnaces, shall select a total power equal to 1.25~1.5 times of load power.
  4. Inductive and capacitive load equipment, such as fluorescent lamps, fans, motors, pumps, air conditioners, computers and refrigerators, shall select a total power equal to or higher than 2~3 times of load power.
  5. For large inductive and capacitive load equipment (such as a motor, or computer), the starting current is quite large (5~8 times of the rated current), so the capacity of the voltage stabilizer shall be 2.5~3 times of the load power.
    For example, two three-phase motors (one is 2.2kW, another is 5.5 kW), when selecting a voltage stabilizer, the capacity shall not be lower than (2.2kW+5.5 kW)*2.5=19.25 kVA, namely a three-phase voltage stabilizer above 20 kVA shall be selected at least.

In this video ATO uses a voltage regulator and multimeter to test the output voltage of the 3 kva voltage stabilizer which has 140V to 270V AC input, 220V AC output. After testing, we may see that the output voltage is within 220V ± 6%, which is in line with the standard.

A voltage stabilizer is a device that automatically adjusts the output voltage to stabilize it. ATO will show you how to test a voltage regulator.

Product reviews
Decent price, stable voltage
5
Dodge DeBoulet
Avatar
10/14/2019 7:31 PM
I have had a hard time to listen to music with my audio system if I boil water with an electric pot. I was advised to purchase a voltage stabilizer, and it was the most affordable one with high performance. I am delighted.
Was this review helpful? Yes No (0/0)
This single phase voltage stabilizer works great
5
Phil Owens
Avatar
5/24/2020 7:43 PM
This single phase voltage stabilizer works great. Nice clean and steady power output. We've been using it for 3 months and no problems. Makes no noise at all. Thinking about getting another.
Was this review helpful? Yes No (0/0)
Voltage regulator accuracy
5
Kolicaceae
Avatar
5/13/2025 8:59 PM
I want a 3 kVA voltage regulator with an accuracy of ±1%. Is that ok?
Was this review helpful? Yes No (0/0)
ATO Responded
The output voltage accuracy of our customized voltage regulator can only reach ±3%, not ±1%. Does this meet your requirements?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

3000 VA Single Phase Automatic Voltage Stabilizer from ATO has an input voltage range of 140V to 260V, which means if the input voltage is between 140V to 260V, it will stabilize it to the regular voltage of about 220V-230V. If the voltage is below 140V or higher than 260V, it will just cut off the appliance from mains.

Specifications

Product NameAutomatic Voltage Stabilizer
Model NumberATOTND-3000
TechnologyRelay Control System + Programmed control computerized + control algorithm relay "Cross zero"
Capacity3 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
PhaseSingle Phase
Input Voltage Range±15% tolerance of output voltage
Output Voltage220V±3%/ 230V±3%/ 240V±3%/ 110V±3%
Adjust Time<1sec. (Against 10% input voltage deviation)
Frequency50Hz/60Hz
Current TypeAC
Protection Over Voltage<250±2V
Protection Lack Voltage<185±2V
Ambient Temperature-10°C~+40°C
Insulation Resistance≥5MΩ
Temperature Protection110℃±10℃
Relative Humidity<90%
Wave Form DistortionNo additional waveform distortion
Efficiency>95%
DisplayLED
Protection GradeIP20
Dielectric Strength1500V/min
CertificationCE, RoHS
Warranty Period12 months
Weight12 Kg
SizeLxWxH=300x250xx220mm
Note: The provided 3 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. And we can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering.

Details

3KVA Single Phase Automatic Voltage Stabilizer Details

Tips: How to select a household voltage stabilizer

  1. AC stabilized voltage supply takes the output apparent power (kVA) as its nominal rated capacity. But in general, the loads are not pure resistors, namely the power factor COS¢≠1, so the active power (kW) actually output by the voltage stabilizer is equal to the capacity (kVA)*COS¢.
  2. In actual selection, the stabilized voltage supply shall be reasonably selected according to specific conditions of the power consumption equipment, such as its rated power, power factor and load types. A proper allowance shall be kept for the output power, particularly, the allowance shall be larger for the selection of an impulse load.
  3. Pure resistive load devices, such as filament lamps, resistance wires, and electric furnaces, shall select a total power equal to 1.25~1.5 times of load power.
  4. Inductive and capacitive load equipment, such as fluorescent lamps, fans, motors, pumps, air conditioners, computers and refrigerators, shall select a total power equal to or higher than 2~3 times of load power.
  5. For large inductive and capacitive load equipment (such as a motor, or computer), the starting current is quite large (5~8 times of the rated current), so the capacity of the voltage stabilizer shall be 2.5~3 times of the load power.
    For example, two three-phase motors (one is 2.2kW, another is 5.5 kW), when selecting a voltage stabilizer, the capacity shall not be lower than (2.2kW+5.5 kW)*2.5=19.25 kVA, namely a three-phase voltage stabilizer above 20 kVA shall be selected at least.
Product reviews
Decent price, stable voltage
5
Dodge DeBoulet
Avatar
10/14/2019 7:31 PM
I have had a hard time to listen to music with my audio system if I boil water with an electric pot. I was advised to purchase a voltage stabilizer, and it was the most affordable one with high performance. I am delighted.
Was this review helpful? Yes No (0/0)
This single phase voltage stabilizer works great
5
Phil Owens
Avatar
5/24/2020 7:43 PM
This single phase voltage stabilizer works great. Nice clean and steady power output. We've been using it for 3 months and no problems. Makes no noise at all. Thinking about getting another.
Was this review helpful? Yes No (0/0)
Voltage regulator accuracy
5
Kolicaceae
Avatar
5/13/2025 8:59 PM
I want a 3 kVA voltage regulator with an accuracy of ±1%. Is that ok?
Was this review helpful? Yes No (0/0)
ATO Responded
The output voltage accuracy of our customized voltage regulator can only reach ±3%, not ±1%. Does this meet your requirements?
Only registered users can write reviews
Customers who bought this item also bought

5 kVA Single Phase Automatic Voltage Stabilizer for Home

ATO-AVS-1P5K
$558.57
The provided LED display automatic voltage stabilizer is a kind of relay control stabilizer with 5 kVA, single phase, 95-125V/190-250V AC input voltage range, 110/220V output supply with an accuracy of +/-3%. It has the advantages of high efficiency, and reliable performance, and is ideal for domestic purposes.

30W Single Phase AC Vibration Electric Motor, 220V/110V

ATO-AVB-TO302S1
$92.56
Single phase 220V/110V AC vibration motor for sale online, 30W power, 50/60Hz frequency, 3000/3600rpm rated speed, 2 pole and aluminum alloy material. It is an industrial asynchronous vibrating motor equipped with a matching speed controller to adjust the rotation speed.