5 hp NEMA AC Induction Motor, Single Phase 230V, ODP/TEFC

$1,249.21
Single phase NEMA AC induction motor or general purpose asynchronous motor is 2 pole 3450 rpm, ODP or TEFC enclosure type to choose, 5 hp output power at 60Hz 230V AC. Foot mounted of mounting method, high-efficiency performance, low starting current, suited for a broad variety of applications.
SKU: ATO-IM-RS52
*
Free Shipping
Delivery date: 6-12 days

ATO cheap AC electric motor is NEMA design B, with output 5 horsepower, 2 pole, 184T roll steel frame size, rated speed 3450 rpm, open drip proof and totally enclosed fan cooled enclosure are optional for you.

BasicsModelATORS52D01ATORS52T01
EnclosureODPTEFC
TypeGeneral Purpose Asynchronous Motor
Item Weight97 Ibs
Motor Length18.8 inch
Frame184T Frame
DesignNEMA Design B
CertificationCE, UL
Motor MaterialRoll Steel
Technical ParametersService Factor1.151
Horsepower5 hp
Rated Frequency60 Hz
PhaseSingle Phase
Pole2 pole
Voltage230V AC
Full Load Amps21.3A
Speed3450 RPM
Efficiency80%
DutyContinuous
Isulation ClassClass F
Protection ClassIP54/ IP55
Mounting MethodFoot Mounted
EnvironmentAmbient temperature-15℃≤θ≤40℃
AltitudeAltitude should be lower than 1000 meters above sea level

5 hp AC Induction Motor Dimension
182T Single Phase AC Induction Motor Dimension
Unit: inch

Frame SizeABBAMax AMax BCDE2FHNN-WOPRSUMin VMin ESMin AA
184T7.22.758.56.516.54.53.754.50.412.982.759.259.250.9860.251.1252.51.783/4

NEMA AC Induction Motor Connection Diagram

Nema induction motor connection diagram

Details

5hp NEMA AC Induction Motor Details

Tips: Features of NEMA Design B
Design B is the most common design of AC induction motor. Its starting torque is similar to that of design A, but sometimes still lower, providing a relatively low starting current. However, in industrial application, it locks locked rotor and still allows starting load. The rotating-speed difference is lower than or equivalent to 5%. The electric efficiency and full-load power factor are relatively high. The typical applications include pump, fan and machine tool.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Consult single phase motor information
5
Leila
Avatar
9/5/2023 2:15 AM
Will the 5hp unit still have the limitation of only being able to reduce the speed by 20% without damaging the motor? Is this dependent on how you wire it (with or without capacitors)? I assume this was meant to say "single phase motor".
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, for single-phase motors, only being able to reduce the speed by 20% without damaging the motor (running frequency above about 40HZ).
This depends on how you wire it (with or without capacitors), and is related to the characteristics of single-phase motors: When the operating frequency of single-phase motors does Not reach about 45HZ, the internal centrifugal switch is Not disengaged, and the starting capacitor will always run and cause heat.
If you want to run with speed regulation in the range of 0-60HZ, we suggest that you replace the three-phase motor better.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO cheap AC electric motor is NEMA design B, with output 5 horsepower, 2 pole, 184T roll steel frame size, rated speed 3450 rpm, open drip proof and totally enclosed fan cooled enclosure are optional for you.

BasicsModelATORS52D01ATORS52T01
EnclosureODPTEFC
TypeGeneral Purpose Asynchronous Motor
Item Weight97 Ibs
Motor Length18.8 inch
Frame184T Frame
DesignNEMA Design B
CertificationCE, UL
Motor MaterialRoll Steel
Technical ParametersService Factor1.151
Horsepower5 hp
Rated Frequency60 Hz
PhaseSingle Phase
Pole2 pole
Voltage230V AC
Full Load Amps21.3A
Speed3450 RPM
Efficiency80%
DutyContinuous
Isulation ClassClass F
Protection ClassIP54/ IP55
Mounting MethodFoot Mounted
EnvironmentAmbient temperature-15℃≤θ≤40℃
AltitudeAltitude should be lower than 1000 meters above sea level

5 hp AC Induction Motor Dimension
182T Single Phase AC Induction Motor Dimension
Unit: inch

Frame SizeABBAMax AMax BCDE2FHNN-WOPRSUMin VMin ESMin AA
184T7.22.758.56.516.54.53.754.50.412.982.759.259.250.9860.251.1252.51.783/4

NEMA AC Induction Motor Connection Diagram

Nema induction motor connection diagram

Details

5hp NEMA AC Induction Motor Details

Tips: Features of NEMA Design B
Design B is the most common design of AC induction motor. Its starting torque is similar to that of design A, but sometimes still lower, providing a relatively low starting current. However, in industrial application, it locks locked rotor and still allows starting load. The rotating-speed difference is lower than or equivalent to 5%. The electric efficiency and full-load power factor are relatively high. The typical applications include pump, fan and machine tool.

Product reviews
Consult single phase motor information
5
Leila
Avatar
9/5/2023 2:15 AM
Will the 5hp unit still have the limitation of only being able to reduce the speed by 20% without damaging the motor? Is this dependent on how you wire it (with or without capacitors)? I assume this was meant to say "single phase motor".
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, for single-phase motors, only being able to reduce the speed by 20% without damaging the motor (running frequency above about 40HZ).
This depends on how you wire it (with or without capacitors), and is related to the characteristics of single-phase motors: When the operating frequency of single-phase motors does Not reach about 45HZ, the internal centrifugal switch is Not disengaged, and the starting capacitor will always run and cause heat.
If you want to run with speed regulation in the range of 0-60HZ, we suggest that you replace the three-phase motor better.
Only registered users can write reviews