30kVA 480V to 120V/240V Split Phase Transformer

$9,289.76
Transformer capacity 30kVA, single phase to split phase, step down 480V primary voltage to 120V/240V secondary voltage, overload capacity allows more than 1.2 times the rated load to work for up to 1 hour, making the single-phase transformer harmless.
SKU: ATO-T-DGS30kVA
*
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-16 days

Single phase to split phase transformer rated value 30kVA, convert input voltage 480V to output voltage 120V/240V, winding material can select aluminum or copper wire, enclosure protection grade IP20.

30 kVA Single Phase to Split Phase Transformer Specifications

ModelATO-DGS30kVA
PhaseSingle phase to split phase
Capacity30 kVA
Primary Voltage1 Phase / 2 phase 110, 120, 208, 220, 230, 240, 380, 415, 440, 460, 480,
Secondary Voltage120V/240V AC(L1, L2, N, L+L=240V, L+N=120V)
Frequency50/60Hz
Winding MaterialAluminum/Copper wire (Optional)
Work Efficiency≥95%
Insulation Resistance≥50 MΩ
Electrical Strength2000V AC/1 min
Noise≤35dB (1 meter)
Insulation GradeGrade B (130℃), Grade F (155℃), Grade H (180℃)
Cooling MethodNatural or air cooling
Overload CapacityAllow more than 1.2 times rated load to work for up to 1 hour
Induced Overvoltage Withstand Test125Hz/800V/min
Transformation Ratio<3%
Air Carrying Current<6%
Impedance VoltageAbout 6%
Total Losses10%
CertificationCE, ISO
Temperature-15℃~+45℃
Humidity≤90%RH, without condensation
Altitude<2000m, non corrosive gas and conductive dust
Enclosure Protection GradeIP20
Warranty12 months
Weight of Aluminium Wire TransformerOpen type: 240kg
Protected type: 278kg
Weight of Copper Wire TransformerOpen type: 232kg
Protected type: 275kg

30 kVA Single Phase to Split Phase Transformer Schematic Diagram
Single phase to split phase transformer schematic diagram
30 kVA Single Phase to Split Transformer Dimension (Unit: mm)
Split phase isolation transformer dimension

Aluminium Wire Transformer SizeCopper Wire Transformer Size
Open type: a*b*c=410*400*580mmOpen type: a*b*c=370*360*520mm
Mouting size: D*E=210*250mm (aperture: 20*10mm)Mouting size: 250*245mm (aperture: 20*10mm)
Protected type: A*B*C=455*660*710mmProtected type: A*B*C=455*660*710mm

Details

Single Phase Isolation Transformer Details

Tips: What is no-load operation of a transformer?

The no-load operation of the transformer refers to the working state in which the primary winding of the transformer is connected to the power supply and the secondary winding is open. At this time, the current in the primary winding is called the no-load current of the transformer. No-load current generates a no-load magnetic field. Under the action of the main magnetic field (ie, the magnetic field that cross-links the primary and secondary windings at the same time), an electromotive force is induced in the primary and secondary windings. When the transformer is running at no load, although the secondary side has no power output, the primary side still draws part of the active power from the grid to compensate for the hysteresis loss and eddy current loss caused by the magnetic flux saturation in the iron core | . The size of the hysteresis loss depends on the frequency of the power supply and the area of the hysteresis loop of the core material; the eddy current loss is proportional to the maximum magnetic flux density and the square of the frequency. In addition, there is copper loss caused by no-load current. For transformers of different capacities, the size of no-load current and no-load loss are different.

Product reviews
The highest protection level of isolation transformer
5
Laurar
Avatar
12/16/2021 11:42 PM
What is the highest level of your isolation transformer protection degree?
Was this review helpful? Yes No (0/0)
ATO Responded
The highest level of the factory is IP65.
Doubts about isolation transformer
5
Harris
Avatar
12/30/2021 12:13 AM
Will the output/input voltage of your isolation transformer be set from the factory or can we change it to some other value?
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Single phase to split phase transformer rated value 30kVA, convert input voltage 480V to output voltage 120V/240V, winding material can select aluminum or copper wire, enclosure protection grade IP20.

30 kVA Single Phase to Split Phase Transformer Specifications

ModelATO-DGS30kVA
PhaseSingle phase to split phase
Capacity30 kVA
Primary Voltage1 Phase / 2 phase 110, 120, 208, 220, 230, 240, 380, 415, 440, 460, 480,
Secondary Voltage120V/240V AC(L1, L2, N, L+L=240V, L+N=120V)
Frequency50/60Hz
Winding MaterialAluminum/Copper wire (Optional)
Work Efficiency≥95%
Insulation Resistance≥50 MΩ
Electrical Strength2000V AC/1 min
Noise≤35dB (1 meter)
Insulation GradeGrade B (130℃), Grade F (155℃), Grade H (180℃)
Cooling MethodNatural or air cooling
Overload CapacityAllow more than 1.2 times rated load to work for up to 1 hour
Induced Overvoltage Withstand Test125Hz/800V/min
Transformation Ratio<3%
Air Carrying Current<6%
Impedance VoltageAbout 6%
Total Losses10%
CertificationCE, ISO
Temperature-15℃~+45℃
Humidity≤90%RH, without condensation
Altitude<2000m, non corrosive gas and conductive dust
Enclosure Protection GradeIP20
Warranty12 months
Weight of Aluminium Wire TransformerOpen type: 240kg
Protected type: 278kg
Weight of Copper Wire TransformerOpen type: 232kg
Protected type: 275kg

30 kVA Single Phase to Split Phase Transformer Schematic Diagram
Single phase to split phase transformer schematic diagram
30 kVA Single Phase to Split Transformer Dimension (Unit: mm)
Split phase isolation transformer dimension

Aluminium Wire Transformer SizeCopper Wire Transformer Size
Open type: a*b*c=410*400*580mmOpen type: a*b*c=370*360*520mm
Mouting size: D*E=210*250mm (aperture: 20*10mm)Mouting size: 250*245mm (aperture: 20*10mm)
Protected type: A*B*C=455*660*710mmProtected type: A*B*C=455*660*710mm

Details

Single Phase Isolation Transformer Details

Tips: What is no-load operation of a transformer?

The no-load operation of the transformer refers to the working state in which the primary winding of the transformer is connected to the power supply and the secondary winding is open. At this time, the current in the primary winding is called the no-load current of the transformer. No-load current generates a no-load magnetic field. Under the action of the main magnetic field (ie, the magnetic field that cross-links the primary and secondary windings at the same time), an electromotive force is induced in the primary and secondary windings. When the transformer is running at no load, although the secondary side has no power output, the primary side still draws part of the active power from the grid to compensate for the hysteresis loss and eddy current loss caused by the magnetic flux saturation in the iron core | . The size of the hysteresis loss depends on the frequency of the power supply and the area of the hysteresis loop of the core material; the eddy current loss is proportional to the maximum magnetic flux density and the square of the frequency. In addition, there is copper loss caused by no-load current. For transformers of different capacities, the size of no-load current and no-load loss are different.

Product reviews
The highest protection level of isolation transformer
5
Laurar
Avatar
12/16/2021 11:42 PM
What is the highest level of your isolation transformer protection degree?
Was this review helpful? Yes No (0/0)
ATO Responded
The highest level of the factory is IP65.
Doubts about isolation transformer
5
Harris
Avatar
12/30/2021 12:13 AM
Will the output/input voltage of your isolation transformer be set from the factory or can we change it to some other value?
Was this review helpful? Yes No (0/0)
Only registered users can write reviews