20kVA 440V to 120V/240V Split Phase Transformer

$6,298.76
Single phase to split phase transformer is an automation distribution transformer, capacity 20kVA, convert primary voltage 440V to secondary voltage 120V/240V. Low heat emission makes this transformer energy-saving and environmentally friendly.
SKU: ATO-T-DGS20kVA
*
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-16 days

20kVA single phase to split phase transformer with wheels, frequency 50/60Hz, step down 440V input voltage to 120V/240V output voltage, frequency 50/60Hz, work efficiency up to 95%.

20 kVA Single Phase to Split Phase Transformer Specifications

ModelATO-DGS20kVA
PhaseSingle phase to split phase
Capacity20 kVA
Primary Voltage1 Phase / 2 phase 110, 120, 208, 220, 230, 240, 380, 415, 440, 460, 480,
Secondary Voltage120V/240V AC(L1, L2, N, L+L=240V, L+N=120V)
Frequency50/60Hz
Winding MaterialAluminum/Copper wire (Optional)
Work Efficiency≥95%
Insulation Resistance≥50 MΩ
Electrical Strength2000V AC/1 min
Noise≤35dB (1 meter)
Insulation GradeGrade B (130℃), Grade F (155℃), Grade H (180℃)
Cooling MethodNatural or air cooling
Overload CapacityAllow more than 1.2 times rated load to work for up to 1 hour
Induced Overvoltage Withstand Test125Hz/800V/min
Transformation Ratio<3%
Air Carrying Current<6%
Impedance VoltageAbout 6%
Total Losses10%
CertificationCE, ISO
Temperature-15℃~+45℃
Humidity≤90%RH, without condensation
Altitude<2000m, non corrosive gas and conductive dust
Enclosure Protection GradeIP20
Warranty12 months
Weight of Aluminium Wire TransformerOpen type: 145kg
Protected type: 180kg
Weight of Copper Wire TransformerOpen type: 150kg
Protected type: 185kg

20 kVA Single Phase to Split Phase Transformer Schematic Diagram
Single phase to split phase transformer schematic diagram
20 kVA Single Phase to Split Transformer Dimension (Unit: mm)
Split phase isolation transformer dimension

Aluminium Wire Transformer SizeCopper Wire Transformer Size
Open type: a*b*c=370*380*520mmOpen type: a*b*c=330*340*470mm
Mouting size: D*E=190*220mm (aperture: 20*10mm)Mouting size: 280*185mm (aperture: 20*10mm)
Protected type: A*B*C=455*660*710mmProtected type: A*B*C=420*610*610mm

Details

Single Phase Isolation Transformer Details

Tips: The difference between no-load and load transformer

The main difference between no-load operation and load operation of the transformer is mainly reflected in the secondary line state. The secondary line of the transformer load operation is connected to the load, and the generated power is large.

The transformer uses the principle of electromagnetic induction to change the AC voltage. The main components are the primary coil, the secondary coil and the iron core (magnetic core). In electrical equipment and wireless circuits, it is often used for voltage rise and fall, impedance matching, and safety isolation. When the transformer is running at no load; only no-load loss, that is, iron loss and stray, is consumed, which is 6% of the total capacity, and when the load is running, it is no-load loss + load loss, that is, copper loss, which is the total consumption of the transformer.

Product reviews
Setting of 20kVA split-phase transformer
5
Ellis
Avatar
10/27/2021 8:10 PM
Will the output/input voltage of your 20kVA split phase transformer be set from the factory or can we change it to some other value?
Was this review helpful? Yes No (0/0)
ATO Responded
Input/output voltages are factory selected options, which cannot be modified on site.
Doubts about isolation transformer
5
Harris
Avatar
12/30/2021 12:48 AM
Will the output/input voltage of your isolation transformer be set from the factory or can we change it to some other value?
Was this review helpful? Yes No (0/0)
ATO Responded
Input/output voltages are factory selected options, which cannot be modified on site.
Is your isolation transformer bi-directional?
5
Joshp
Avatar
1/25/2022 7:44 PM
For example, if your transformer is to convert 3ph, 220V primary to 3ph, 400V secondary, and I apply 3ph, 400V at secondary side, will I get 3ph, 220V at primary side?
Was this review helpful? Yes No (0/0)
ATO Responded
Our isolation transformer can be used in both directions, but the output voltage will be reduced by 2% in case of reverse. For example, the voltage of 220V will become 215V.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

20kVA single phase to split phase transformer with wheels, frequency 50/60Hz, step down 440V input voltage to 120V/240V output voltage, frequency 50/60Hz, work efficiency up to 95%.

20 kVA Single Phase to Split Phase Transformer Specifications

ModelATO-DGS20kVA
PhaseSingle phase to split phase
Capacity20 kVA
Primary Voltage1 Phase / 2 phase 110, 120, 208, 220, 230, 240, 380, 415, 440, 460, 480,
Secondary Voltage120V/240V AC(L1, L2, N, L+L=240V, L+N=120V)
Frequency50/60Hz
Winding MaterialAluminum/Copper wire (Optional)
Work Efficiency≥95%
Insulation Resistance≥50 MΩ
Electrical Strength2000V AC/1 min
Noise≤35dB (1 meter)
Insulation GradeGrade B (130℃), Grade F (155℃), Grade H (180℃)
Cooling MethodNatural or air cooling
Overload CapacityAllow more than 1.2 times rated load to work for up to 1 hour
Induced Overvoltage Withstand Test125Hz/800V/min
Transformation Ratio<3%
Air Carrying Current<6%
Impedance VoltageAbout 6%
Total Losses10%
CertificationCE, ISO
Temperature-15℃~+45℃
Humidity≤90%RH, without condensation
Altitude<2000m, non corrosive gas and conductive dust
Enclosure Protection GradeIP20
Warranty12 months
Weight of Aluminium Wire TransformerOpen type: 145kg
Protected type: 180kg
Weight of Copper Wire TransformerOpen type: 150kg
Protected type: 185kg

20 kVA Single Phase to Split Phase Transformer Schematic Diagram
Single phase to split phase transformer schematic diagram
20 kVA Single Phase to Split Transformer Dimension (Unit: mm)
Split phase isolation transformer dimension

Aluminium Wire Transformer SizeCopper Wire Transformer Size
Open type: a*b*c=370*380*520mmOpen type: a*b*c=330*340*470mm
Mouting size: D*E=190*220mm (aperture: 20*10mm)Mouting size: 280*185mm (aperture: 20*10mm)
Protected type: A*B*C=455*660*710mmProtected type: A*B*C=420*610*610mm

Details

Single Phase Isolation Transformer Details

Tips: The difference between no-load and load transformer

The main difference between no-load operation and load operation of the transformer is mainly reflected in the secondary line state. The secondary line of the transformer load operation is connected to the load, and the generated power is large.

The transformer uses the principle of electromagnetic induction to change the AC voltage. The main components are the primary coil, the secondary coil and the iron core (magnetic core). In electrical equipment and wireless circuits, it is often used for voltage rise and fall, impedance matching, and safety isolation. When the transformer is running at no load; only no-load loss, that is, iron loss and stray, is consumed, which is 6% of the total capacity, and when the load is running, it is no-load loss + load loss, that is, copper loss, which is the total consumption of the transformer.

Product reviews
Setting of 20kVA split-phase transformer
5
Ellis
Avatar
10/27/2021 8:10 PM
Will the output/input voltage of your 20kVA split phase transformer be set from the factory or can we change it to some other value?
Was this review helpful? Yes No (0/0)
ATO Responded
Input/output voltages are factory selected options, which cannot be modified on site.
Doubts about isolation transformer
5
Harris
Avatar
12/30/2021 12:48 AM
Will the output/input voltage of your isolation transformer be set from the factory or can we change it to some other value?
Was this review helpful? Yes No (0/0)
ATO Responded
Input/output voltages are factory selected options, which cannot be modified on site.
Is your isolation transformer bi-directional?
5
Joshp
Avatar
1/25/2022 7:44 PM
For example, if your transformer is to convert 3ph, 220V primary to 3ph, 400V secondary, and I apply 3ph, 400V at secondary side, will I get 3ph, 220V at primary side?
Was this review helpful? Yes No (0/0)
ATO Responded
Our isolation transformer can be used in both directions, but the output voltage will be reduced by 2% in case of reverse. For example, the voltage of 220V will become 215V.
Only registered users can write reviews