30 kVA Isolation Transformer Features
- 3-phase unit with 30 kVA power rating.
- Primary voltage of 480V AC on the primary side and secondary voltage of 415V AC on the secondary side.
- Have a minimum 1 year warranty.
- Better protection, high quality workmanship.
Specifications
| Basics | Model | ATO-SG30KVA |
| Phase | 3 phase | |
| Capacity | 30 kVA | |
| Weight of Aluminium Wire Transformer | Open type: 160kg Protected type: 185kg | |
| Weight of Copper Wire Transformer | Open type: 160kg Protected type: 185kg | |
| Technical Parameters | Primary Voltage | 480V (Optional: 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 415V/ 480V) |
| Secondary Voltage | 415V (Optional: 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 415V/ 480V) | |
| Voltage Convert | Three phase to three phase | |
| Frequency | 50Hz / 60 Hz | |
| Winding Material | Aluminium/Copper wire (Optional) | |
| Work Efficiency | ≥95% | |
| Insulation Resistance | ≥50 MΩ | |
| Electrical Strength | 3000V AC/1 min | |
| Noise | <35-65dB (1 meter) | |
| Insulation Grade | H level | |
| Wiring Mode | Dyn11 | |
| Cooling Mode | Dry type air cooling | |
| Overload Capacity | Allow more than 1.2 times rated load to work for up to 4 hours | |
| Enclosure Protection Grade | IP 24 | |
| Certificate | CE, ISO | |
| Warranty | 12 months | |
| Working Environment | Temperature | -15℃~+40℃ |
| Humidity | ≤90%RH, without condensation | |
| Altitude | <1000m, non corrosive gas and conductive dust |
Note:
Transformer can only convert voltage and CANNOT convert frequency.
Transformer CANNOT convert single phase voltage to 3 phase voltage.
Input/output voltage, power rating and whether with shell of all transformers, can be customized according to clients' requirements.
3 Phase Isolation Transformer Schematic Diagram

3 Phase Isolation Transformer Details

30 kVA Isolation Transformer Installation Dimension

| Aluminium Wire Transformer Size | Copper Wire Transformer Size | ||||||
| Open type: a*b*c=440*350*430mm | Open type: a*b*c=440*340*420mm | ||||||
| Mouting size: d*e=300*205mm | Mouting size: d*e=300*195mm | ||||||
| Protected type: A*B*C=420*610*610mm | Protected type: A*B*C=420*610*610mm |
Tips: Characteristics of ATO isolation transformer at the AC power input
- If the third harmonic and interference signal of the Grid is severe, use isolation transformer to remove the third harmonic and reduce the interference signal.
- The use of isolation transformers can generate a new neutral line to avoid the abnormal operation of equipment caused by unfit neutral power line.
- The current waveform distortion(such as third harmonic) caused by nonlinear load can be isolated without affecting the Grid.
Product reviews
Solid isolation transformer, good package
Naviathan
1/8/2019 2:15 AM
I had to modify this transformer to use it for my purpose. I am using it as a safety device on my electronics service bench. It is a solid, well built unit.
Was this review helpful? (0/0)
Update invoice info
Andrey
4/23/2019 1:50 AM
My order of 30kVA Isolation Transformer was shipped out and the invoice is in my name, is it possible to make an invoice in the company name?
Was this review helpful? (0/0)
Can ATO supply the isolation transformer we need?
Tpe
1/26/2022 1:00 AM
Can you provide a 70kVA isolation transformer with 3 inputs (460V, 480V, 690V) and 1 output (440V)?
Was this review helpful? (0/0)
Only registered users can write reviews