3" DN80 Pneumatic Diaphragm Globe Shut-off Valve

$3,219.99
Hot sale 3 inch pneumatic globe valve! Suitable for gases and liquids, flange connection, with pneumatic membrane actuator, DC24V solenoid valve, limit switch and air filtering pressure reducing valve. The pneumatic valve can accept the signal from the regulating instrument to realize the automatic control of parameters such as pressure, flow, temperature or liquid level. High performance ensures reliable operation of industrial processes.
SKU: ATO-PGV-DN80
*
Free Shipping
Delivery date: 6-12 days

Note: This globe valve cannot be used for drinking water.

High-precision 3-inch pneumatic membrane shut-off valve, the valve body structure is single-seated, packing seal sealing form, the pressure class is PN16, nominal diameter range DN80mm, applicable fluid temperature from -60 ~ 450 ℃. Leakage level Ⅵ, flow characteristics for fast open. Balanced valve inner parts, improve the permissible differential pressure of the globe valve.

Specification

ModelATO-810D-1S2A-4DK41-DN80
Pipe Diameter3" DN80
Nominal PressurePN16 MPa
Rated Flow Coefficient120 KV
Rated Stroke20 mm
Film Effective Area400 cm²
Allowable Pressure DifferencePositive Action: 0.99
Opposite Reaction: 1.32
Signal Pressure0 or 250
Allowable LeakageHard Seal: General: 10-4 × valve rated capacity; Tight type: single-seat: 1.2 × 10-7
Soft Seal: Class VI
Operating Temperature≤ 250℃
Connection MethodFlangeless
Medium of UseGas and Liquid
Valve Body Material304
Bonnet TypeStandard type (-17 ~ +250℃)
Cover TypeScrew compression type
Sealing MaterialV-shaped PTFE packing, reinforced PTFE packing, graphite braided packing, flexible graphite
Valve Core TypeSingle-seat spool
Flow CharacteristicsQuick opening characteristic
Included AccessoriesPneumatic diaphragm actuator, DC24V solenoid valve, limit switch, and air filter regulator.


Dimension (Unit: mm)

Pneumatic globe valve dimension

DNALHH1H4
80340298100221400


Application

Pneumatic globe valve application

Tips: What Should I Do If My Pneumatic Globe Valve Suddenly Doesn't Work?

Pneumatic globe valve suddenly not working can be caused by a variety of reasons. First, check if the air supply is normal and make sure the pneumatic actuator gets enough air pressure. Check whether the air supply connection, pressure regulator and other parts are working properly. Second, check whether the connection between the valve body and the valve cover is tight to prevent air leakage.

If the above is normal, check whether the pneumatic globe valve spool is contaminated or stuck, you can clean the spool and its surrounding. At the same time, check the control system to ensure that the signal transmission is normal. If the problem remains unresolved, it is recommended to seek professional maintenance personnel for overhaul, which may require more in-depth maintenance and troubleshooting to ensure the normal operation of the pneumatic shut-off valve.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This globe valve cannot be used for drinking water.

High-precision 3-inch pneumatic membrane shut-off valve, the valve body structure is single-seated, packing seal sealing form, the pressure class is PN16, nominal diameter range DN80mm, applicable fluid temperature from -60 ~ 450 ℃. Leakage level Ⅵ, flow characteristics for fast open. Balanced valve inner parts, improve the permissible differential pressure of the globe valve.

Specification

ModelATO-810D-1S2A-4DK41-DN80
Pipe Diameter3" DN80
Nominal PressurePN16 MPa
Rated Flow Coefficient120 KV
Rated Stroke20 mm
Film Effective Area400 cm²
Allowable Pressure DifferencePositive Action: 0.99
Opposite Reaction: 1.32
Signal Pressure0 or 250
Allowable LeakageHard Seal: General: 10-4 × valve rated capacity; Tight type: single-seat: 1.2 × 10-7
Soft Seal: Class VI
Operating Temperature≤ 250℃
Connection MethodFlangeless
Medium of UseGas and Liquid
Valve Body Material304
Bonnet TypeStandard type (-17 ~ +250℃)
Cover TypeScrew compression type
Sealing MaterialV-shaped PTFE packing, reinforced PTFE packing, graphite braided packing, flexible graphite
Valve Core TypeSingle-seat spool
Flow CharacteristicsQuick opening characteristic
Included AccessoriesPneumatic diaphragm actuator, DC24V solenoid valve, limit switch, and air filter regulator.


Dimension (Unit: mm)

Pneumatic globe valve dimension

DNALHH1H4
80340298100221400


Application

Pneumatic globe valve application

Tips: What Should I Do If My Pneumatic Globe Valve Suddenly Doesn't Work?

Pneumatic globe valve suddenly not working can be caused by a variety of reasons. First, check if the air supply is normal and make sure the pneumatic actuator gets enough air pressure. Check whether the air supply connection, pressure regulator and other parts are working properly. Second, check whether the connection between the valve body and the valve cover is tight to prevent air leakage.

If the above is normal, check whether the pneumatic globe valve spool is contaminated or stuck, you can clean the spool and its surrounding. At the same time, check the control system to ensure that the signal transmission is normal. If the problem remains unresolved, it is recommended to seek professional maintenance personnel for overhaul, which may require more in-depth maintenance and troubleshooting to ensure the normal operation of the pneumatic shut-off valve.

Only registered users can write reviews