2-1/2" DN65 Pneumatic Diaphragm Globe Shut-off Valve

$2,806.99
2-1/2" DN65 pneumatic diaphragm actuated globe valve is suitable for gas and liquid, temperature ≤250℃. Connection mode is flange, equipped with pneumatic thin film actuator, DC24V solenoid valve, limit switch and air filtering pressure reducing valve. Efficient control, stable and reliable, widely used in industrial fields.
SKU: ATO-PGV-DN65
*
Free Shipping
Delivery date: 6-12 days

Note: This globe valve cannot be used for drinking water.

2-1/2" pneumatic globe valve is a kind of valve used for fluid control, the diameter is DN65mm. pneumatic actuator is used to realize automatic control, suitable for high pressure environment. Nominal pressure range of 1.6MPa, rated flow coefficient 75KV, operating temperature ≤ 250 ℃. Pneumatic globe valve is widely used in industrial systems to provide reliable fluid regulation and cut-off function.

Specification

ModelATO-810D-1S2A-4DK41-DN65
Pipe Diameter2-1/2" DN65
Nominal PressurePN16 MPa
Rated Flow Coefficient75 KV
Rated Stroke20 mm
Film Effective Area400 cm²
Allowable Pressure DifferencePositive Action: 1.52
Opposite Reaction: 2.03
Signal Pressure0 or 250
Allowable LeakageHard Seal: General: 10-4 × valve rated capacity; Tight type: single-seat: 1.2 × 10-7
Soft Seal: Class VI
Operating Temperature≤ 250℃
Connection MethodFlangeless
Medium of UseGas and Liquid
Valve Body Material304
Bonnet TypeStandard type (-17 ~ +250℃)
Cover TypeScrew compression type
Sealing MaterialV-shaped PTFE packing, reinforced PTFE packing, graphite braided packing, flexible graphite
Valve Core TypeSingle-seat spool
Flow CharacteristicsQuick opening characteristic
Included AccessoriesPneumatic diaphragm actuator, DC24V solenoid valve, limit switch, and air filter regulator.


Dimension (Unit: mm)

Pneumatic globe valve dimension

DNALHH1H4
6534027692.5214400


Application

Pneumatic globe valve application

Tips: Pneumatic Globe Valve Use Tips

  • Stable Gas Supply: Ensure that the pneumatic shut-off valve gets enough gas supply to ensure normal opening and closing operation of the valve.
  • Valve Operation Status Monitoring: Regularly check the operation status of the valve to ensure that the spool movement is free, no jamming or abnormal sound. If there is any abnormality, carry out maintenance in time.
  • Prevent Overloading: Avoid overloading operation to prevent damage to the pneumatic actuator or valve due to improper operation.
  • Prevent Pollution: Keep the working environment clean, prevent pollutants from entering the valve body, so as not to affect the normal movement of the valve spool.
  • Regular lubrication: Regular lubrication of the key parts of the pneumatic actuator to ensure the long-term reliable operation of the valve.
  • Avoid Freezing: In cold environments, take anti-freezing measures to prevent the pneumatic stop valve from icing and affecting normal use.
  • Pay Attention to Safe Operation: Operators should operate in accordance with relevant regulations to avoid safety accidents.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This globe valve cannot be used for drinking water.

2-1/2" pneumatic globe valve is a kind of valve used for fluid control, the diameter is DN65mm. pneumatic actuator is used to realize automatic control, suitable for high pressure environment. Nominal pressure range of 1.6MPa, rated flow coefficient 75KV, operating temperature ≤ 250 ℃. Pneumatic globe valve is widely used in industrial systems to provide reliable fluid regulation and cut-off function.

Specification

ModelATO-810D-1S2A-4DK41-DN65
Pipe Diameter2-1/2" DN65
Nominal PressurePN16 MPa
Rated Flow Coefficient75 KV
Rated Stroke20 mm
Film Effective Area400 cm²
Allowable Pressure DifferencePositive Action: 1.52
Opposite Reaction: 2.03
Signal Pressure0 or 250
Allowable LeakageHard Seal: General: 10-4 × valve rated capacity; Tight type: single-seat: 1.2 × 10-7
Soft Seal: Class VI
Operating Temperature≤ 250℃
Connection MethodFlangeless
Medium of UseGas and Liquid
Valve Body Material304
Bonnet TypeStandard type (-17 ~ +250℃)
Cover TypeScrew compression type
Sealing MaterialV-shaped PTFE packing, reinforced PTFE packing, graphite braided packing, flexible graphite
Valve Core TypeSingle-seat spool
Flow CharacteristicsQuick opening characteristic
Included AccessoriesPneumatic diaphragm actuator, DC24V solenoid valve, limit switch, and air filter regulator.


Dimension (Unit: mm)

Pneumatic globe valve dimension

DNALHH1H4
6534027692.5214400


Application

Pneumatic globe valve application

Tips: Pneumatic Globe Valve Use Tips

  • Stable Gas Supply: Ensure that the pneumatic shut-off valve gets enough gas supply to ensure normal opening and closing operation of the valve.
  • Valve Operation Status Monitoring: Regularly check the operation status of the valve to ensure that the spool movement is free, no jamming or abnormal sound. If there is any abnormality, carry out maintenance in time.
  • Prevent Overloading: Avoid overloading operation to prevent damage to the pneumatic actuator or valve due to improper operation.
  • Prevent Pollution: Keep the working environment clean, prevent pollutants from entering the valve body, so as not to affect the normal movement of the valve spool.
  • Regular lubrication: Regular lubrication of the key parts of the pneumatic actuator to ensure the long-term reliable operation of the valve.
  • Avoid Freezing: In cold environments, take anti-freezing measures to prevent the pneumatic stop valve from icing and affecting normal use.
  • Pay Attention to Safe Operation: Operators should operate in accordance with relevant regulations to avoid safety accidents.
Only registered users can write reviews