22μF 50V Aluminum Electrolytic Capacitor

$1.05
Good price aluminum electrolytic capacitor provides 22μF capacity, 50V rated voltage, high voltage electrolytic capacitor with lead spacing 2mm, dissipation factor 9%, cap. tolerance ±20%. The electrolytic capacitor providing good electrical performance, wide application range and high reliability.
SKU: ATO-EC-22UF50V
This product has a minimum quantity of 100
Free Shipping
Delivery date: 6-12 days

Lower price power capacitor with ≤0.01*CR*VR or 3 ㎂ * after 2 minutes leakage current, direct plug installation type, 2000 hours endurance, operating tempertaure -40~105℃.

Features

  • Endurance: 105℃- 2000 hours up to 5000 hours
  • Low impedance and high ripple current
  • High reliability
  • Wide voltage range

Specification

ModelATO-EC-KF220M
SeriesLow impedance 105°C type
Capacity100 ㎌
Rated voltage35V
Installation TypeDirect plug
Size5*11 mm
lead spacing2 mm
Operating temperature-40~105℃
Cap. tolerance (∆C)±20% (120Hz 20℃)
Dissipation factor (tanδ)9%
Low temperature characteristic at 120Hz (Z ratio max.)3 (Z-25℃/ Z+20℃)
Leakage current (Lleak)≤0.01*CR*VR or 3 ㎂ * after 2 minutes
Enduarance (105℃)Test2000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Shelf life (105℃)Test1000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value

Dimension (mm)

Electrolytic capacitor dimension

ModelDimension (mm)
ATO-EC-KF220M∅D6.3
F3.5
∅d0.5
a1.5

Tips: Structural characteristics of Aluminum Electrolytic Capacitor.

The aluminum shell and the plastic cover are closed to form an electrolytic capacitor. Compared with other types of capacitors, aluminum electrolytic capacitors have the following obvious characteristics in structure:

The working medium of aluminum electrolytic capacitors is to generate a very thin layer of aluminum oxide (Al2O3) on the surface of aluminum foil by anodizing. This oxide dielectric layer and the anode of the capacitor are combined into a complete system. Interdependent and cannot be independent of each other; what we usually call a capacitor, its electrodes and dielectrics are independent of each other.

The core of the aluminum electrolytic capacitor is made of four layers of anode aluminum foil, electrolytic paper, cathode aluminum foil, and electrolytic paper.

In this video, ATO will show you three phase parallel capacitors / self-healing.

Product reviews
The quality is excellent and highly recommended
5
James
Avatar
11/12/2025 8:37 PM
This capacitor has become an essential part of my repair kit. After replacing the power board in an old audio system with it, the humming noise vanished, and measurements showed a significant improvement in ripple. The 2000-hour endurance test also provides peace of mind.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Lower price power capacitor with ≤0.01*CR*VR or 3 ㎂ * after 2 minutes leakage current, direct plug installation type, 2000 hours endurance, operating tempertaure -40~105℃.

Features

  • Endurance: 105℃- 2000 hours up to 5000 hours
  • Low impedance and high ripple current
  • High reliability
  • Wide voltage range

Specification

ModelATO-EC-KF220M
SeriesLow impedance 105°C type
Capacity100 ㎌
Rated voltage35V
Installation TypeDirect plug
Size5*11 mm
lead spacing2 mm
Operating temperature-40~105℃
Cap. tolerance (∆C)±20% (120Hz 20℃)
Dissipation factor (tanδ)9%
Low temperature characteristic at 120Hz (Z ratio max.)3 (Z-25℃/ Z+20℃)
Leakage current (Lleak)≤0.01*CR*VR or 3 ㎂ * after 2 minutes
Enduarance (105℃)Test2000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Shelf life (105℃)Test1000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value

Dimension (mm)

Electrolytic capacitor dimension

ModelDimension (mm)
ATO-EC-KF220M∅D6.3
F3.5
∅d0.5
a1.5

Tips: Structural characteristics of Aluminum Electrolytic Capacitor.

The aluminum shell and the plastic cover are closed to form an electrolytic capacitor. Compared with other types of capacitors, aluminum electrolytic capacitors have the following obvious characteristics in structure:

The working medium of aluminum electrolytic capacitors is to generate a very thin layer of aluminum oxide (Al2O3) on the surface of aluminum foil by anodizing. This oxide dielectric layer and the anode of the capacitor are combined into a complete system. Interdependent and cannot be independent of each other; what we usually call a capacitor, its electrodes and dielectrics are independent of each other.

The core of the aluminum electrolytic capacitor is made of four layers of anode aluminum foil, electrolytic paper, cathode aluminum foil, and electrolytic paper.

Product reviews
The quality is excellent and highly recommended
5
James
Avatar
11/12/2025 8:37 PM
This capacitor has become an essential part of my repair kit. After replacing the power board in an old audio system with it, the humming noise vanished, and measurements showed a significant improvement in ripple. The 2000-hour endurance test also provides peace of mind.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews