High quality power capacitor with 10μF capacity, 400V rated voltage, dissipation factor 15%, Z-Max.lmpedance 1100mΩ, operating tempertaure -40~105℃. The electrolytic capacitor providing good electrical performance, wide application range and high reliability.
Features
- Endurance: 105℃- 2000 hours up to 5000 hours
- Low impedance and high ripple current
- High reliability
- Wide voltage range
Specification
| Model | ATO-EC-KF100M400G | |
| Series | Low impedance 105°C type | |
| Capacity | 10 μF | |
| Rated voltage | 400V | |
| Installation Type | Direct plug | |
| Size | 10*12.5 mm | |
| Operating temperature | -40~105℃ | |
| Cap. tolerance (∆C) | ±20% (120Hz 20℃) | |
| Dissipation factor (tanδ) | 15% | |
| Low temperature characteristic at 120Hz (Z ratio max.) | 5 (Z-25℃/ Z+20℃) | |
| Leakage current (Lleak) | ≤0.01*CR*VR or 3 ㎂ * after 2 minutes | |
| Enduarance (105℃) | Test | 2000h |
| ∆C | ≤20% of initial measured value | |
| tanδ | ≤200% of specified measured value | |
| Lleak | ≤ the specified measured value | |
| Shelf life (105℃) | Test | 1000h |
| ∆C | ≤20% of initial measured value | |
| tanδ | ≤200% of specified measured value | |
| Lleak | ≤ the specified measured value | |
Dimension (mm)

| Model | Dimension (mm) | |
| ATO-EC-KF100M400G | ∅D | 10 |
| F | 5 | |
| ∅d | 0.6 | |
| a | 1.5 | |
Tips: Features of Aluminum Electrolytic Capacitor.
- The capacitance per unit volume is very large, tens to hundreds of times larger than other types of capacitors.
- The rated capacity can be very large, which can easily reach tens of thousands of μf or even a few f (but cannot be compared with the electric double layer capacitance).
- The price has an overwhelming advantage over other types, because the components of electrolytic capacitors are all common industrial materials, such as aluminum and so on. The equipment for manufacturing aluminum electrolytic capacitors are also common industrial equipment, which can be mass-produced and the cost is relatively low.