20 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

$1,854.63
Low cost 20 hp VFD for sale, with 32 amps, single phase 220 volt -240 volt input, 380 volt three phase output. This 15 kW variable frequency drive built-in RS485 interface, controlled by V/F, vector control mode.
SKU: GK3000-CS0150G
*
Free Shipping
Delivery date: 6-12 days

20 hp (15 kW) variable frequency drive at fair price, converts 1-phase 220V to 3-phase 380V for AC motor speed control, to realize high precision and wide speed regulating range and high performance.

Specification:

BasicsModelGK3000-CS0150G
Capacity20 hp (15 kW)
Shipping weight22 kg
Dimension330*200*200 mm
Installation size316*188 mm
I/O FeatureRated current32 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage (Optional)3 phase AC 380V/ 400V/ 415V/ 440V/ 460V (Note: 440V, 460V output voltage only for the 1-phase 240V input VFD)
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Universal VFD vs. single phase to three phase VFD

Universal VFD is a power control device that applies the principle of frequency conversion technology and microelectronics technology to control AC motor by changing the frequency of motor working power supply, converting AC power with fixed voltage and frequency into AC power with variable voltage or frequency. The process is to convert the frequency AC power into DC power through rectifier, and then convert the DC power into AC power with controllable frequency and voltage to supply the motor.

The single phase to three phase variable frequency drive is based on the ordinary VFD, which converts the 220V AC power into DC power through the rectifier (voltage doubling rectifier), and then converts the DC power into three-phase 380V AC power with controllable frequency and voltage to supply the motor. This method does not step up the voltage through the transformer, but only through the rectifier boost circuit, which greatly reduces the size and weight of the VFD, and the cost is lower compared to the boost device.

In this video, ATO will show you the vfd basic troubleshooting guide.

4-20mA speed control on VFD

4-20mA is as common in analog control systems as 0~10V, and ATO GK3000 series VFDs are also perfectly compatible.

Product reviews
Use of 20hp VFD
5
Mitchell
Avatar
8/16/2021 12:59 AM
Could we use your 20hp VFD with solar and battery power?
Was this review helpful? Yes No (0/0)
ATO Responded
No, our 20hp VFD can not be used with batteries, nor solar, it can be used for AC supply only.
I am looking for some assistance to wiring a PLC to a VFD for motor control.
5
Klew
Avatar
12/10/2021 2:13 AM
I watched the following video that you have controlled the motor by the PLC program.
Was this review helpful? Yes No (0/0)
ATO Responded
ATO VFD has a corresponding connection terminal to connect to the PLC analog signal input signal (4-20ma, 0-10V ). You can view the video on for details.https://www.youtube.com/watch?v=STnfr-ZoGWQ&list=PLlo8RulDRnthBFbP4ydheukDSKw2hAfDn&index=7, and the relay terminal TA/TB/TC of the VFD output can be connected to your PLC.
Looking forward to hearing from you.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

20 hp (15 kW) variable frequency drive at fair price, converts 1-phase 220V to 3-phase 380V for AC motor speed control, to realize high precision and wide speed regulating range and high performance.

Specification:

BasicsModelGK3000-CS0150G
Capacity20 hp (15 kW)
Shipping weight22 kg
Dimension330*200*200 mm
Installation size316*188 mm
I/O FeatureRated current32 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage (Optional)3 phase AC 380V/ 400V/ 415V/ 440V/ 460V (Note: 440V, 460V output voltage only for the 1-phase 240V input VFD)
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Universal VFD vs. single phase to three phase VFD

Universal VFD is a power control device that applies the principle of frequency conversion technology and microelectronics technology to control AC motor by changing the frequency of motor working power supply, converting AC power with fixed voltage and frequency into AC power with variable voltage or frequency. The process is to convert the frequency AC power into DC power through rectifier, and then convert the DC power into AC power with controllable frequency and voltage to supply the motor.

The single phase to three phase variable frequency drive is based on the ordinary VFD, which converts the 220V AC power into DC power through the rectifier (voltage doubling rectifier), and then converts the DC power into three-phase 380V AC power with controllable frequency and voltage to supply the motor. This method does not step up the voltage through the transformer, but only through the rectifier boost circuit, which greatly reduces the size and weight of the VFD, and the cost is lower compared to the boost device.

Product reviews
Use of 20hp VFD
5
Mitchell
Avatar
8/16/2021 12:59 AM
Could we use your 20hp VFD with solar and battery power?
Was this review helpful? Yes No (0/0)
ATO Responded
No, our 20hp VFD can not be used with batteries, nor solar, it can be used for AC supply only.
I am looking for some assistance to wiring a PLC to a VFD for motor control.
5
Klew
Avatar
12/10/2021 2:13 AM
I watched the following video that you have controlled the motor by the PLC program.
Was this review helpful? Yes No (0/0)
ATO Responded
ATO VFD has a corresponding connection terminal to connect to the PLC analog signal input signal (4-20ma, 0-10V ). You can view the video on for details.https://www.youtube.com/watch?v=STnfr-ZoGWQ&list=PLlo8RulDRnthBFbP4ydheukDSKw2hAfDn&index=7, and the relay terminal TA/TB/TC of the VFD output can be connected to your PLC.
Looking forward to hearing from you.
Only registered users can write reviews
Customers who bought this item also bought

10 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

GK3000-CS0075G
$1,095.67
Affordable price 10 hp (7.5 kW) VFD, converts 220v/ 230v /240v 1 phase input to 380v/ 400v/ 415v 3 phase output, 17 amps, V/F and sensorless vector control.