2 hp NEMA AC Induction Motor, Three Phase 230/460V, ODP/TEFC

$754.76
The provided best ATO AC induction motor comes with NEMA B design, 2 hp, 2 pole number, three phase at 230/460V, has a maximum operating speed of 3450 revolutions per minute (rpm). C face footed mounting, open drip proof (ODP) enclosure motor or totally enclosed fan cooled (TEFC) enclosure motor can be chosen.
SKU: ATO-IM-RT22
*
Free Shipping
Delivery date: 6-12 days

This 2 horsepower AC electric motor is 3 phase, 60Hz, 230/460V asynchronous motor for general purpose applications such as air compressors. It has 145TC rolled stell frame construction for strength and durability, and NEMA B design which providing low starting current and high locked rotor torque.
2 hp 3 phase AC Induction Motor Specification

BasicsModelATORT222D11ATORT22T11
EnclosureODPTEFC
TypeGeneral Purpose Asynchronous Motor
Item Weight55 Ibs
Motor Length14.6 inch
Frame145TC Frame
DesignNEMA Design B
CertificationCE, UL
Motor MaterialRoll Steel
Technical ParametersService Factor1.151.25
Horsepower2 hp
Rated Frequency60 Hz
PhaseThree Phase
Pole2 pole
Voltage230/460V AC
Full Load Amps5.31/2.65A
Speed3450 RPM
Efficiency85.5%
DutyContinuous
Isulation ClassClass F
Protection ClassIP54/ IP55
Mounting MethodC Face, Footed
EnvironmentAmbient temperature-15℃≤θ≤40℃
AltitudeAltitude should be lower than 1000 meters above sea level

2 hp 3 phase AC Induction Motor Dimension

3 phase nema ac induction motor dimension
Unit: inch

Frame
Size
ABBAMax
A
Max
B
Max
BB
Max
BD
CDE2FHN-WOPRSUMin
ES
Min
AA
AHBFBCAJAKMin
V
145TC5.62.7576.180.166.514.63.52.7550.342.256.77.080.7710.1880.8751.413/42.121/2-13+0.125.8754.52

NEMA AC Induction Motor Connection Diagram

Nema induction motor connection diagram

Details

2 hp NEMA AC Induction Motor Details

Tips: The AC induction motor bearing is overheating, why and how to do?

  • The match between bearing and shaft is too loose or too tight.
    This situation will result in redundant friction, thus leading to the temperature rise of the motor bearing. The loose spindle can be inlayed with the bushing. If it is too tight, it is required to reprocess the spindle to the standard size.
  • The bearing and end bell coordination is too loose or too tight.
    If it is too loose, the end bell can be inlayed with the bushing; if it is too tight, it is required to reprocess into the standard size.
  • The lubricating oil of the bearing is too much or too little, or the oil quality is not good.
    Place certain lubricating oil or exchange the lubricating oil.
  • The bearing has been damaged.
    Exchange the bearing.

 

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

This 2 horsepower AC electric motor is 3 phase, 60Hz, 230/460V asynchronous motor for general purpose applications such as air compressors. It has 145TC rolled stell frame construction for strength and durability, and NEMA B design which providing low starting current and high locked rotor torque.
2 hp 3 phase AC Induction Motor Specification

BasicsModelATORT222D11ATORT22T11
EnclosureODPTEFC
TypeGeneral Purpose Asynchronous Motor
Item Weight55 Ibs
Motor Length14.6 inch
Frame145TC Frame
DesignNEMA Design B
CertificationCE, UL
Motor MaterialRoll Steel
Technical ParametersService Factor1.151.25
Horsepower2 hp
Rated Frequency60 Hz
PhaseThree Phase
Pole2 pole
Voltage230/460V AC
Full Load Amps5.31/2.65A
Speed3450 RPM
Efficiency85.5%
DutyContinuous
Isulation ClassClass F
Protection ClassIP54/ IP55
Mounting MethodC Face, Footed
EnvironmentAmbient temperature-15℃≤θ≤40℃
AltitudeAltitude should be lower than 1000 meters above sea level

2 hp 3 phase AC Induction Motor Dimension

3 phase nema ac induction motor dimension
Unit: inch

Frame
Size
ABBAMax
A
Max
B
Max
BB
Max
BD
CDE2FHN-WOPRSUMin
ES
Min
AA
AHBFBCAJAKMin
V
145TC5.62.7576.180.166.514.63.52.7550.342.256.77.080.7710.1880.8751.413/42.121/2-13+0.125.8754.52

NEMA AC Induction Motor Connection Diagram

Nema induction motor connection diagram

Details

2 hp NEMA AC Induction Motor Details

Tips: The AC induction motor bearing is overheating, why and how to do?

  • The match between bearing and shaft is too loose or too tight.
    This situation will result in redundant friction, thus leading to the temperature rise of the motor bearing. The loose spindle can be inlayed with the bushing. If it is too tight, it is required to reprocess the spindle to the standard size.
  • The bearing and end bell coordination is too loose or too tight.
    If it is too loose, the end bell can be inlayed with the bushing; if it is too tight, it is required to reprocess into the standard size.
  • The lubricating oil of the bearing is too much or too little, or the oil quality is not good.
    Place certain lubricating oil or exchange the lubricating oil.
  • The bearing has been damaged.
    Exchange the bearing.

 

Only registered users can write reviews