2 HP (1.5 kW) Magnetic Drive Pump

$2,623.11
Economical price magnetic drive pump with 2 hp (1.5 kW) for sale online. Magnetic pump with ETFE casing material and FKM O-ring material, achieve pump long life expectancy. Magnetic drive centrifugal pump adaptable to IEC standard motor. This type of pump is suitable forchemical industry and metal industry.
SKU: ATO-MDP-2HP
*
*
*
Free Shipping
Delivery date: 10-12 days

2 hp (1.5 kW) magnetic drive pump without seal, can achieve zero leakage, especially suitable for conveying flammable, explosive, corrosive liquid. It is used to require that the pump can only leak or even not leak the occasion.

Features:

  • ETFE (carbon-fiber reinforced) wetted-end material.
  • Able to handle many types of chemical and temperature up to 90 ℃.
  • Available in flange connections.

Specification:

ModelATO-352PW-F
Specific Gravity1.2
Frequency50Hz, 60Hz
Rated Voltage3-phase 380V (please contact us for other voltages)
Pump performance at specific point (M-L/min)50Hz23-100
60Hz27-100
Motor Output2 HP (1.5 kW)
Flange Size32 mm (outlet); 32 mm (inlet)
Casing MaterialETFE
Shaft Materialceramic
Bearing Materialcarbon
O-ring MaterialFKM
Interface Modethread, flange
Net Weight38kg


Structure:

PW-F magnetic drive pump structure


Dimension (Unit: mm)

PW-F magnetic drive pump dimension

ModelWHLabcdef
352PW-F160242505.5222.513215513012078

Tips: Can Magnetic Drive Pump Runs Dry?

One of major limitations of magnetic drive pumps is the risk associated with running dry. Because the pumped liquid will act as lubricant and coolant, in case of dry run, the bearing and some other parts could overheat and eventually become damaged. However, some magnetic drive pumps are designed to handle short periods of dry running, but it's essential to check the specifications before operating the pump without liquid.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2 hp (1.5 kW) magnetic drive pump without seal, can achieve zero leakage, especially suitable for conveying flammable, explosive, corrosive liquid. It is used to require that the pump can only leak or even not leak the occasion.

Features:

  • ETFE (carbon-fiber reinforced) wetted-end material.
  • Able to handle many types of chemical and temperature up to 90 ℃.
  • Available in flange connections.

Specification:

ModelATO-352PW-F
Specific Gravity1.2
Frequency50Hz, 60Hz
Rated Voltage3-phase 380V (please contact us for other voltages)
Pump performance at specific point (M-L/min)50Hz23-100
60Hz27-100
Motor Output2 HP (1.5 kW)
Flange Size32 mm (outlet); 32 mm (inlet)
Casing MaterialETFE
Shaft Materialceramic
Bearing Materialcarbon
O-ring MaterialFKM
Interface Modethread, flange
Net Weight38kg


Structure:

PW-F magnetic drive pump structure


Dimension (Unit: mm)

PW-F magnetic drive pump dimension

ModelWHLabcdef
352PW-F160242505.5222.513215513012078

Tips: Can Magnetic Drive Pump Runs Dry?

One of major limitations of magnetic drive pumps is the risk associated with running dry. Because the pumped liquid will act as lubricant and coolant, in case of dry run, the bearing and some other parts could overheat and eventually become damaged. However, some magnetic drive pumps are designed to handle short periods of dry running, but it's essential to check the specifications before operating the pump without liquid.

Only registered users can write reviews