1300W Submersible/Deep Water Well Pump, 110VDC

$879.94
Cheap price well pump for sale online, 110 volt water well pump with 1300W rated power, 155m/ 112m/ 146m maximum head can be chosen, maximum flow 1003/ 1717/ 1585 gallons per hour, 3 inch/ 4 inch inlet diameter and 1.25 inch outlet diameter. Deep well pump can be used for water feature, water gardens, tank, pool, large pond or fountain.
SKU: ATO-WWP-110V1300
*
Free Shipping
Delivery date: 6-12 days

Low price submersible well pump with brushless DC motor internal motor, 80cm/ 60cm length for selection, 4000 rpm speed, single-suction plastic impeller/ single-suction stainless steel impeller impeller structure and 45% efficiency.

Well Pump Features

ModelATO-3DPC3.8-155-110-1300ATO-4DPC6.5-112-110-1300ATO-4DSC6-146-110-1300
Max. flow3.8m³/ h (1003 gph, American system)6.5m³/ h (1717 gph, American system)6.0m³/ h (1585 gph, American system)
Max. head155m (510ft)112m (365ft)146m (479ft)
Length80cm60cm60cm
Inlet diameter3 inch4 inch4 inch
Outlet diameter1.25 inch1.25 inch1.25 inch
Impeller structureSingle-suction plastic impellerSingle-suction plastic impellerSingle-suction stainless steel impeller
Material of outlet/connector/oil cylinderBrassBrassStainless steel or brass
Voltage110V DC
Power1300W
Internal motorBrushless DC motor
Speed4000rpm
Material of shaft304 stainless steel
Material of outlet/connector/oil cylinderBrass
No water protection functionThe pump stops working automatically when there is no water in the well, and it will automatically restart working 30 minutes later.
Required open circuit voltage (VOC) of solar panel<220V DC
Required power of solar panel≥1.3*pump power
Efficiency45%
Warranty2 years
Cable length2m

Controller Features

ModelDF-110
Best MPPT voltage range110-150V DC
Max. input current17A
Working temperature-15~+60℃ (5~140℉)
DisplayLED display can show power, voltage, current and speed value.
FunctionsAutomatic charging (for battery)
Variable frequency
Automatic power ON/ OFF
Soft start
High voltage/ low voltage/ over-current/ high temperature protection
Protection classIP65

Package included

  • 1 * Water well pump with 2m cable
  • 1 * DC controller
  • 1 * Stainless steel float switch (water level sensor for the tank)
  • 1 * Pump outlet joint connector
  • 1 * Splice kit for cable join
  • 1 * Splice kit for waterproof
  • 1 * User manual

1100W 110V DC water well pump performance curves:

Max. Flow: 3.8m³/h, Max. Head: 155m, Model: 3DPC3.8-155-110-1300

1300W 110V DC water well pump high head performance curves

Max. Flow: 6.5m3/h, Max. Head: 112m, Model: 4DPC6.5-112-110-1300

1300W 110V DC water well pump performance curves

Max. Flow: 6m3/h, Max. Head: 146m, Model: 4DSC6-146-110-1300

1300W 110V DC water well pump performance curves

Tips: How to Calculate the Head of Water Well Pump for Water Tank?

When we design a water pumping system for water tank or home use, we should confirm the head of well pump. If the pump head is not enough, the water flow will become small or even the water can not be pumped to the water tank.

In general, there are 3 distance should be confirmed.

  • h1: the perpendicular distance between water tank and ground.
  • h2: the perpendicular distance between ground and solar water pump (in the well).
  • h3: the horizontal distance between water tank and solar water pump (in the well).

Then, the pump head H can be calculated as follows:

H=h1+h2+h3/ 10

For example, the height of water tank is 12m, the solar water pump is placed at a depth of 5m, and the horizontal distance between water tank and solar water pump is 10m.

According to the formula, H=h1+h2+h3/ 10=12+5+10/ 10=18m.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low price submersible well pump with brushless DC motor internal motor, 80cm/ 60cm length for selection, 4000 rpm speed, single-suction plastic impeller/ single-suction stainless steel impeller impeller structure and 45% efficiency.

Well Pump Features

ModelATO-3DPC3.8-155-110-1300ATO-4DPC6.5-112-110-1300ATO-4DSC6-146-110-1300
Max. flow3.8m³/ h (1003 gph, American system)6.5m³/ h (1717 gph, American system)6.0m³/ h (1585 gph, American system)
Max. head155m (510ft)112m (365ft)146m (479ft)
Length80cm60cm60cm
Inlet diameter3 inch4 inch4 inch
Outlet diameter1.25 inch1.25 inch1.25 inch
Impeller structureSingle-suction plastic impellerSingle-suction plastic impellerSingle-suction stainless steel impeller
Material of outlet/connector/oil cylinderBrassBrassStainless steel or brass
Voltage110V DC
Power1300W
Internal motorBrushless DC motor
Speed4000rpm
Material of shaft304 stainless steel
Material of outlet/connector/oil cylinderBrass
No water protection functionThe pump stops working automatically when there is no water in the well, and it will automatically restart working 30 minutes later.
Required open circuit voltage (VOC) of solar panel<220V DC
Required power of solar panel≥1.3*pump power
Efficiency45%
Warranty2 years
Cable length2m

Controller Features

ModelDF-110
Best MPPT voltage range110-150V DC
Max. input current17A
Working temperature-15~+60℃ (5~140℉)
DisplayLED display can show power, voltage, current and speed value.
FunctionsAutomatic charging (for battery)
Variable frequency
Automatic power ON/ OFF
Soft start
High voltage/ low voltage/ over-current/ high temperature protection
Protection classIP65

Package included

  • 1 * Water well pump with 2m cable
  • 1 * DC controller
  • 1 * Stainless steel float switch (water level sensor for the tank)
  • 1 * Pump outlet joint connector
  • 1 * Splice kit for cable join
  • 1 * Splice kit for waterproof
  • 1 * User manual

1100W 110V DC water well pump performance curves:

Max. Flow: 3.8m³/h, Max. Head: 155m, Model: 3DPC3.8-155-110-1300

1300W 110V DC water well pump high head performance curves

Max. Flow: 6.5m3/h, Max. Head: 112m, Model: 4DPC6.5-112-110-1300

1300W 110V DC water well pump performance curves

Max. Flow: 6m3/h, Max. Head: 146m, Model: 4DSC6-146-110-1300

1300W 110V DC water well pump performance curves

Tips: How to Calculate the Head of Water Well Pump for Water Tank?

When we design a water pumping system for water tank or home use, we should confirm the head of well pump. If the pump head is not enough, the water flow will become small or even the water can not be pumped to the water tank.

In general, there are 3 distance should be confirmed.

  • h1: the perpendicular distance between water tank and ground.
  • h2: the perpendicular distance between ground and solar water pump (in the well).
  • h3: the horizontal distance between water tank and solar water pump (in the well).

Then, the pump head H can be calculated as follows:

H=h1+h2+h3/ 10

For example, the height of water tank is 12m, the solar water pump is placed at a depth of 5m, and the horizontal distance between water tank and solar water pump is 10m.

According to the formula, H=h1+h2+h3/ 10=12+5+10/ 10=18m.

Only registered users can write reviews