1.5 hp (1100W) Submersible/Deep Water Well Pump, 72VDC

$821.07
1.5 hp well pump with 72V DC working voltage, submersible well pump has optional maximum head 110/ 123m (360/ 400ft), maximum flow 3.8m³/ 5m³ per hour, 3 inch inlet diameter and 1.25 inch outlet diameter, single-suction plastic/ stainless steel impeller can be chosen. The water well pump can be used for irrigation,water tank, farms and livestock.
SKU: ATO-WWP-72V1100
*
Free Shipping
Delivery date: 6-12 days

Cost-effective deep well water pump for sale, with 50cm length, brushless DC motor internal motor. The deep well pump with a special DC controller which can show power, voltage, current and speed values in real time.

Well Pump Features

ModelATO-3DPC3.8-123-72-1100ATO-3DSC5-112-72-1100
Max. flow3.8m³/ h (1003 gph, American system)5m³/ h (1321 gph, American system)
Max. head123m (400ft)110m (360ft)
Impeller structureSingle-suction plastic impellerSingle-suction stainless steel impeller
Material of outlet/connector/oil cylinderBrassStainless steel
Length80cm
Inlet diameter3 inch
Outlet diameter1.25 inch
Voltage72V DC
Power1.5 hp (1100W)
Impeller structureSingle-suction plastic impeller
Internal motorBrushless DC motor
Speed4000rpm
Material of shaft304 stainless steel
Material of outlet/connector/oil cylinderBrass
No water protection functionThe pump stops working automatically when there is no water in the well, and it will automatically restart working 30 minutes later.
Required open circuit voltage (VOC) of solar panel<170V DC
Required power of solar panel≥1.3*pump power
Efficiency45%
Warranty2 years
Cable length2m

Controller Features

ModelDF-72
Best MPPT voltage range90-120V DC
Max. input current17A
Working temperature-15~+60℃ (5~140℉)
DisplayLED display can show power, voltage, current and speed value.
FunctionsAutomatic charging (for battery)
Variable frequency
Automatic power ON/ OFF
Soft start
High voltage/ low voltage/ over-current/ high temperature protection
Protection classIP65

Package included

  • 1 * Water well pump with 2m cable
  • 1 * DC controller
  • 1 * Stainless steel float switch (water level sensor for the tank)
  • 1 * Pump outlet joint connector
  • 1 * Splice kit for cable join
  • 1 * Splice kit for waterproof
  • 1 * User manual

1100W 72V DC water well pump performance curves:

Max. Flow: 3.8m³/h, Max. Head: 123m, Model: 3DPC3.8-123-72-11001100W 72V DC water well pump high head performance curves

Max. Flow: 5m3/h, Max. Head: 110m, Model: 3DSC5-112-72-1100

1.5 hp 72V DC water well pump performance curves

Tips: Precautions for Water Well Pump.

  1. If the pump has any small fault, remember not to let it work. If the packing of the water pump shaft is worn out, it should be added in time. If the water pump is continued to be used, air will leak. The direct effect of this is that the power consumption of the motor will increase and the impeller will be damaged.
  2. If the pump vibrates strongly during use, be sure to stop and check the cause, otherwise it will also cause damage to the pump.
  3. When the bottom valve of the water pump leaks, some people will fill the inlet pipe of the pump with dry soil and flush the bottom valve with water, which is not advisable. Because when the dry soil is put into the water inlet pipe, the dry soil will enter the pump when the pump starts to work, which will damage the pump impeller and bearing, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced with a new one.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Buy a water pump
5
Cuguti
Avatar
10/14/2026 1:03 AM
Could you please provide a quote for a water pump with a flow rate of 25 cc/rev, a speed of 1000 rpm, and a discharge pressure of 300-350 psi?
Was this review helpful? Yes No (0/0)
ATO Responded
We need to know what type of pump you need: a submersible pump, a sewage pump, etc.?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cost-effective deep well water pump for sale, with 50cm length, brushless DC motor internal motor. The deep well pump with a special DC controller which can show power, voltage, current and speed values in real time.

Well Pump Features

ModelATO-3DPC3.8-123-72-1100ATO-3DSC5-112-72-1100
Max. flow3.8m³/ h (1003 gph, American system)5m³/ h (1321 gph, American system)
Max. head123m (400ft)110m (360ft)
Impeller structureSingle-suction plastic impellerSingle-suction stainless steel impeller
Material of outlet/connector/oil cylinderBrassStainless steel
Length80cm
Inlet diameter3 inch
Outlet diameter1.25 inch
Voltage72V DC
Power1.5 hp (1100W)
Impeller structureSingle-suction plastic impeller
Internal motorBrushless DC motor
Speed4000rpm
Material of shaft304 stainless steel
Material of outlet/connector/oil cylinderBrass
No water protection functionThe pump stops working automatically when there is no water in the well, and it will automatically restart working 30 minutes later.
Required open circuit voltage (VOC) of solar panel<170V DC
Required power of solar panel≥1.3*pump power
Efficiency45%
Warranty2 years
Cable length2m

Controller Features

ModelDF-72
Best MPPT voltage range90-120V DC
Max. input current17A
Working temperature-15~+60℃ (5~140℉)
DisplayLED display can show power, voltage, current and speed value.
FunctionsAutomatic charging (for battery)
Variable frequency
Automatic power ON/ OFF
Soft start
High voltage/ low voltage/ over-current/ high temperature protection
Protection classIP65

Package included

  • 1 * Water well pump with 2m cable
  • 1 * DC controller
  • 1 * Stainless steel float switch (water level sensor for the tank)
  • 1 * Pump outlet joint connector
  • 1 * Splice kit for cable join
  • 1 * Splice kit for waterproof
  • 1 * User manual

1100W 72V DC water well pump performance curves:

Max. Flow: 3.8m³/h, Max. Head: 123m, Model: 3DPC3.8-123-72-11001100W 72V DC water well pump high head performance curves

Max. Flow: 5m3/h, Max. Head: 110m, Model: 3DSC5-112-72-1100

1.5 hp 72V DC water well pump performance curves

Tips: Precautions for Water Well Pump.

  1. If the pump has any small fault, remember not to let it work. If the packing of the water pump shaft is worn out, it should be added in time. If the water pump is continued to be used, air will leak. The direct effect of this is that the power consumption of the motor will increase and the impeller will be damaged.
  2. If the pump vibrates strongly during use, be sure to stop and check the cause, otherwise it will also cause damage to the pump.
  3. When the bottom valve of the water pump leaks, some people will fill the inlet pipe of the pump with dry soil and flush the bottom valve with water, which is not advisable. Because when the dry soil is put into the water inlet pipe, the dry soil will enter the pump when the pump starts to work, which will damage the pump impeller and bearing, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced with a new one.
Product reviews
Buy a water pump
5
Cuguti
Avatar
10/14/2026 1:03 AM
Could you please provide a quote for a water pump with a flow rate of 25 cc/rev, a speed of 1000 rpm, and a discharge pressure of 300-350 psi?
Was this review helpful? Yes No (0/0)
ATO Responded
We need to know what type of pump you need: a submersible pump, a sewage pump, etc.?
Only registered users can write reviews