1 hp (750W) Submersible/Deep Water Well Pump, 48VDC

$783.55
1 hp well pump has optional maximum head 95m/ 56m/ 67m, maximum flow 1003/ 1585/ 1321 gallons per hour, single-suction impeller, 3/ 4 inch inlet diameter and 1.25 inch outlet diameter. Water well pump can be used for irrigation, water tank, pool, livestock or farms.
SKU: ATO-WWP-48V750
*
Free Shipping
Delivery date: 6-12 days

750W submersible well pump with 48V working voltage, Brushless DC motor, DC controller, the special DC controller can show power, voltage, current and speed values in real time.

Well Pump Features

ModelATO-3DPC3.8-95-48-750ATO-4DPC6-56-48-750ATO-4DSC6-67-48-750
Max. flow3.8m³/ h (1003 gph, American system)6m³/ h (1585 gph, American system)6m³/ h (1321 gph, American system)
Max. head95m (310ft)56m (180ft)67m (220ft)
Length70cm50cm50cm
Inlet diameter3 inch4 inch4 inch
Outlet diameter1.25 inch1.25 inch1.25 inch
Impeller structureSingle-suction plastic impellerSingle-suction plastic impellerSingle-suction stainless steel impeller
Material of outlet/ connector/ oil cylinderBrassBrassStainless steel or brass
Voltage48V DC
Power1 hp (750W)
Internal motorBrushless DC motor
Speed4000rpm
Material of shaft304 stainless steel
No water protection functionThe pump stops working automatically when there is no water in the well, and it will automatically restart working 30 minutes later.
Required open circuit voltage (VOC) of solar panel<120V DC
Required power of solar panel≥1.3*pump power
Efficiency45%
Warranty2 years
Cable length2m

Controller Features

ModelDF-48
Best MPPT voltage range60-90V DC
Max. input current17A
Working temperature-15~+60℃ (5~140℉)
DisplayLED display can show power, voltage, current and speed value.
FunctionsAutomatic charging (for battery)
Variable frequency
Automatic power ON/ OFF
Soft start
High voltage/ low voltage/ over-current/ high temperature protection
Protection classIP65

Package included

  • 1 * Water well pump with 2m cable
  • 1 * DC controller
  • 1 * Stainless steel float switch (water level sensor for the tank)
  • 1 * Pump outlet joint connector
  • 1 * Splice kit for cable join
  • 1 * Splice kit for waterproof
  • 1 * User manual

750W 48V DC water well pump performance curves:

Max. Flow: 3.8m3/h, Max. Head: 95m, Model: 3DPC3.8-95-48-750

750W 48V DC water well pump high head performance curves

Max. Flow: 6.0m³/h, Max. Head: 56m, Model: 4DPC6-56-48-750

750W 48V DC 4 inch water well pump performance curves

Max. Flow: 6.0m3/h, Max. Head: 67m, Model: 4DSC6-67-48-750

750W 48V DC water well pump high head performance curves

Tips: How to Install the Water Well Pump?

  1. If the geographical environment permits, the pump should be as close to the water source as possible to reduce the length of the suction pipe. The foundation of the pump installation site should be firm, and a special foundation should be repaired for fixed pumping stations.
  2. The water inlet pipeline should be sealed and reliable, must have special support, and cannot be hung on the water pump. For the water inlet pipe equipped with the bottom valve, the axis of the bottom valve should be installed vertically to the horizontal plane as far as possible, and the angle between the axis and the horizontal plane should not be less than 45°. When the water source is a channel, the bottom valve should be more than 0.50 meters above the bottom of the water, and a net should be added to prevent debris from entering the pump.
  3. The base of the machine and pump should be level, and the connection with the foundation should be firm. When the machine and the pump are driven by the belt, the tight side of the belt is at the bottom, so that the transmission efficiency is high, and the direction of the pump impeller should be consistent with the direction indicated by the arrow; when the coupling is used for transmission, the machine and the pump must be coaxial.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Good Water Flow
5
Cleoy
Avatar
10/12/2026 6:55 PM
I installed this well pump for our farm water supply, and it’s been working well so far. The water flow is strong enough for our irrigation needs, and it’s useful for filling the storage tank too. Setup was pretty straightforward, and it’s been a practical choice for our daily water pumping tasks.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

750W submersible well pump with 48V working voltage, Brushless DC motor, DC controller, the special DC controller can show power, voltage, current and speed values in real time.

Well Pump Features

ModelATO-3DPC3.8-95-48-750ATO-4DPC6-56-48-750ATO-4DSC6-67-48-750
Max. flow3.8m³/ h (1003 gph, American system)6m³/ h (1585 gph, American system)6m³/ h (1321 gph, American system)
Max. head95m (310ft)56m (180ft)67m (220ft)
Length70cm50cm50cm
Inlet diameter3 inch4 inch4 inch
Outlet diameter1.25 inch1.25 inch1.25 inch
Impeller structureSingle-suction plastic impellerSingle-suction plastic impellerSingle-suction stainless steel impeller
Material of outlet/ connector/ oil cylinderBrassBrassStainless steel or brass
Voltage48V DC
Power1 hp (750W)
Internal motorBrushless DC motor
Speed4000rpm
Material of shaft304 stainless steel
No water protection functionThe pump stops working automatically when there is no water in the well, and it will automatically restart working 30 minutes later.
Required open circuit voltage (VOC) of solar panel<120V DC
Required power of solar panel≥1.3*pump power
Efficiency45%
Warranty2 years
Cable length2m

Controller Features

ModelDF-48
Best MPPT voltage range60-90V DC
Max. input current17A
Working temperature-15~+60℃ (5~140℉)
DisplayLED display can show power, voltage, current and speed value.
FunctionsAutomatic charging (for battery)
Variable frequency
Automatic power ON/ OFF
Soft start
High voltage/ low voltage/ over-current/ high temperature protection
Protection classIP65

Package included

  • 1 * Water well pump with 2m cable
  • 1 * DC controller
  • 1 * Stainless steel float switch (water level sensor for the tank)
  • 1 * Pump outlet joint connector
  • 1 * Splice kit for cable join
  • 1 * Splice kit for waterproof
  • 1 * User manual

750W 48V DC water well pump performance curves:

Max. Flow: 3.8m3/h, Max. Head: 95m, Model: 3DPC3.8-95-48-750

750W 48V DC water well pump high head performance curves

Max. Flow: 6.0m³/h, Max. Head: 56m, Model: 4DPC6-56-48-750

750W 48V DC 4 inch water well pump performance curves

Max. Flow: 6.0m3/h, Max. Head: 67m, Model: 4DSC6-67-48-750

750W 48V DC water well pump high head performance curves

Tips: How to Install the Water Well Pump?

  1. If the geographical environment permits, the pump should be as close to the water source as possible to reduce the length of the suction pipe. The foundation of the pump installation site should be firm, and a special foundation should be repaired for fixed pumping stations.
  2. The water inlet pipeline should be sealed and reliable, must have special support, and cannot be hung on the water pump. For the water inlet pipe equipped with the bottom valve, the axis of the bottom valve should be installed vertically to the horizontal plane as far as possible, and the angle between the axis and the horizontal plane should not be less than 45°. When the water source is a channel, the bottom valve should be more than 0.50 meters above the bottom of the water, and a net should be added to prevent debris from entering the pump.
  3. The base of the machine and pump should be level, and the connection with the foundation should be firm. When the machine and the pump are driven by the belt, the tight side of the belt is at the bottom, so that the transmission efficiency is high, and the direction of the pump impeller should be consistent with the direction indicated by the arrow; when the coupling is used for transmission, the machine and the pump must be coaxial.
Product reviews
Good Water Flow
5
Cleoy
Avatar
10/12/2026 6:55 PM
I installed this well pump for our farm water supply, and it’s been working well so far. The water flow is strong enough for our irrigation needs, and it’s useful for filling the storage tank too. Setup was pretty straightforward, and it’s been a practical choice for our daily water pumping tasks.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews