10kW Brushless DC Motor, 72V/96V, 50 Nm

$5,994.72
50 Nm high torque brushless DC motor, 3-phase 10kW electric BLDC motor matching with controller/ gearbox best for electric car, available 72 volt, 96 volt voltage for selection. 2000 rpm rated speed, high efficiency up to 85%.
SKU: ATO-BLDC-10KR2
*
*
*
*
Free Shipping
Delivery date: 8-12 days

10kW high power BLDC motor for sales, 72V/96V DC working voltage, 50 Nm high holding torque, peak torque up to 110 Nm. 2000 rpm, IP65 rating with shaft seal, brushless design for long life. Brushless DC motor kit (BLDC motor with the controller and gearbox) offers a great combination of durability, efficiency, torque and speed at affordable price. In general, it would be more cost-effective to buy a complete set of our BLDC motors.

Basic Specifications

  • Model: ATO-220WDM50020 (Click to see the motor drawings)
  • Matched Controller Model: ATO-KBL / ATO-KEB (Click to the product page)
  • Rated Power: 10000W
  • Rated Voltage: 72V DC / 96V DC (Optional)
  • Rated Current: 163A at 72V, 122A at 96V
  • Phase: 3 phase
  • Holding Torque: 50 Nm
  • Peak Torque: 110 Nm
  • Rated Speed: 2000 rpm
  • No-load Speed: 2400 rpm
  • Square Flange Size: 220 mm
  • Weight: 70 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Length: 40-50mm
  • Insulation Grade: F
  • Protection Grade: IP65
  • Motor Lead Length: 30 cm, if you buy a kit (motor+controller), an extra 1 meter of wire shall be provided.
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    10kW brushless DC motor is three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    BLDC motor works with a matching controller (ATOTH-G) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless DC motor works with a gearbox (choose inline gearbox or right angle gearbox with gear ratio from 3:1 to 200:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    10kW 72V/96V BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

Power Wire

RedYellowBlue
Motor UMotor VMotor W

Feedback Wire

Hall Line ColorOrange and BlackOrangeYellowBlueGreen
Hall Signal Definition5V0VHall AHall BHall C
Plug Serial Number12345


Dimension (Unit: mm)

10kw 2000rpm bldc motor size

Details

10KW Brushless DC Motor Details

Tips: More introduction about 10kW brushless DC motor

10 kW 2000rpm powerful brushless DC motor features high torque, compact shape, low load noise and long service life. With its high power, it can be applied in industrial machinery, boat, car, traction motor, pump, bus A/C systems, etc. As no brush in brushless DC motor, the friction is greatly reduced during running, and spark radio interference also decreased. Generally, brushless DC motors are high efficiency, no spark in running and smooth operation. What's more, 50Nm high torque brushless DC motor is long life, low maintenance cost. There are no brushes in BLDC which will wear out or break and need to be replaced, which makes the BLDC much longer service life and inexpensive.

PDF:

ATO High Torque BLDC Motor Drawings & Price

Note:

  1. ATO highly recommends 48V motors because all models of 48V are in stock, the price is cheaper and the delivery time is shorter, only about 7 days.
  2. 24V/ 72V/ 96V motors are generally not in stock, need to be produced by the factory, which will cost more to start the production line and the delivery time will be longer, about 25 days.
  3. The prices in the table are just for your reference. If you want to get the latest quotation, please feel free to contact us.
ModelMotor PriceController PriceRated Power
(USD/Piece)(USD/Piece)(kW)
80mm Series DC Brushless Motor
ATO-80WDM01330 24/48/72/96V24V: 458.24395.520.41
48V: 305.49
72/96V: 580.43
ATO-80WDM02420 24/48/72/96V24V: 564.53395.520.5
48V: 376.35
72/96V: 715.06
ATO-80WDM02430 24/48/72/96V24V: 529.16395.520.75
48V: 352.77
72/96V: 670.26
ATO-80WDM03320 24/48/72/96V24V: 597.68395.520.69
48V: 398.45
72/96V: 757.36
ATO-80WDM03330 24/48/72/96V24V: 639.27395.521.04
48V: 426.18
72/96V: 809.74
110mm Series DC Brushless Motor
ATO-110WDM02020 24/48/72/96V24V: 687.38395.520.4
48V: 458.25
72/96V: 824.85
ATO-110WDM02030 24/48/72/96V24V: 745.11395.520.6
48V: 496.74
72/96V: 894.13
ATO-110WDM04010 24/48/72/96V24V: 779.86395.520.4
48V: 519.93
72/96V: 935.87
ATO-110WDM04020 24/48/72/96V24V: 788.57395.520.8
48V: 525.71
72/96V: 988.33
ATO-110WDM04030 24/48/72/96V24V: 798.63653.051.3
48V: 532.42
72/96V: 1001.95
ATO-110WDM06010 24/48/72/96V24V: 758.82395.520.6
48V: 505.88
72/96V: 956.69
ATO-110WDM06020 24/48/72/96V24V: 819.59653.051.3
48V: 546.39
72/96V: 1010.82
ATO-110WDM06030 24/48/72/96V24V: 995.94653.051.9
48V: 553.28
72/96V: 1051.23
130mm Series DC Brushless Motor
ATO-130WDM04010 24/48/72/96V24V: 876.95395.520.4
48V: 584.62
72/96V: 1099.08
ATO-130WDM04020 24/48/72/96V24V: 910.67395.520.8
48V: 607.13
72/96V: 1104.98
ATO-130WDM04030 24/48/72/96V24V: 959.18653.051.3
48V: 639.45
72/96V: 1151.01
ATO-130WDM06010 24/48/72/96V24V: 987.65395.520.6
48V: 658.43
72/96V: 1185.17
ATO-130WDM06020 24/48/72/96V24V: 1012.23653.051.3
48V: 674.82
72/96V: 1147.19
ATO-130WDM06030 24/48/72/96V24V: 1047.72653.051.9
48V: 698.48
72/96V: 1208.34
ATO-130WDM07710 24/48/72/96V24V: 1060.07395.520.8
48V: 706.71
72/96V: 1257.94
ATO-130WDM07720 24/48/72/96V24V: 1093.21653.051.6
48V: 738.65
72/96V: 1292.64
ATO-130WDM07730 48/72/96V48V: 751.52653.052.3
72/96V: 1337.71
ATO-130WDM10010 24/48/72/96V24V: 1161.55653.051
48V: 784.83
72/96V: 1396.89
ATO-130WDM10020 24/48/72/96V24V: 1224.36653.052
48V: 816.24
72/96V: 1371.28
ATO-130WDM10030 48/72/96V48V: 879.12898.213.1
72/96V: 1450.55
ATO-130WDM15010 24/48/72/96V24V:1311.88653.051.6
48V: 936.47
72/96V: 1498.35
ATO-130WDM15020 48/72/96V48V: 1086.36898.213.1
72/96V: 1738.17
ATO-130WDM15030 48/72/96V48V: 1127.541119.074.7
72/96V: 1804.64
180mm Series DC Brushless Motor
ATO-180WDM12010 48/72/96V48V: 1246.31653.051.3
72/96V: 1994.09
ATO-180WDM12020 48/72/96V48V: 1323.69653.052.5
72/96V: 2117.91
ATO-180WDM12030 48/72/96V48V: 1398.84898.213.8
72/96V: 2238.14
ATO-180WDM16010 48/72/96V48V: 1555.69653.051.7
72/96V: 2411.32
ATO-180WDM16020 48/72/96V48V: 1625.36898.213.4
72/96V: 2568.07
ATO-180WDM16030 48/72/96V48V: 1745.931119.075
72/96V: 2618.89
ATO-180WDM25010 48/72/96V48V: 2012.54653.052.6
72/96V: 3179.81
ATO-180WDM25020 48/72/96V48V: 2274.191119.075.2
72/96V: 3411.26
ATO-180WDM25030 48/72/96V48V: 2448.581531.997.9
72/96V: 3672.87
ATO-180WDM36010 48/72/96V48V: 2644.28898.213.8
72/96V: 3966.42
ATO-180WDM36020 48/72/96V48V: 2832.561119.077.5
72/96V: 4248.84
ATO-180WDM36030 72/96V72/96V: 4334.691885.1511.3
ATO-180WDM50010 48/72/96V48V: 3284.581119.075.2
72/96V: 4556.41
ATO-180WDM50020 48/72/96V48V: 4344.121531.9910.8
72/96V: 5994.72
ATO-180WDM50030 96V96V: 6204.652261.8415.7

Wiring ATO High Torque BLDC Motor With Controller

In this video, we will show you how to connect a ATO 400W-15kW 24V/48V/72V/96V high torque brushless DC motor with the matching controller.

How to Make Your BLDC Motor Forward and Reverse Control

If you want your electric car to be more powerful, try using ATO high torque BLDC motor kit as the power unit. It is a good idea. Refer to the video step by step to operate, you can achieve the forward and reverse control of the brushless DC motor.

This video shows you how to connect a 50W 24V 3 phase BLDC motor to its driver and achieve speed control.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Modbus RS-485 Serial Communication with Upgraded BLDC Motor Driver

This video will provide you with step-by-step instructions for RS485 serial communication with an upgraded ATO BLDC driver rated at 30A/50A/100A.

Product reviews
I would like to purchase your 10kW 96V BLDC motor
5
David Sonna
Avatar
4/29/2020 7:36 PM
1. I would like to purchase your 10kW 96V BLDC motor, my main issue is that the high-power motors readily available are too loud, what is the noise level for yours?
2. Do you provide customized the BLDC motor shaft?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The sound is very very low, it is below 55 decibels!
2. Yes, We can customize motor shaft based on your needs. May you provide a hand made sketch showing shaft length, diameter, and keyway length/depth?
Operating temperature of 10kW brushless DC motor
5
Hertwig
Avatar
5/19/2021 9:24 PM
Can I use your 10kW BLDC motor outside -20-30°С?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our (10KW 96V 2000rpm) can be used outside -20-30 ° С with no problem at all.
Can ATO's brushless DC motors be customized?
5
Dekett
Avatar
6/24/2021 11:50 PM
We require a 170 volt dc rating BLDC motor. My controller produces 170volts dc and requires a motor able to operate in that environment. Can you customize?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide.
High quality 10kW high torque brushless DC motor
5
Tabyrinth
Avatar
9/3/2021 2:25 AM
Is this motor able to operate at 30RPM and higher for more than an hour? RPM has to be smooth and pretty stable. ——10kW high torque brushless DC motor
Was this review helpful? Yes No (0/0)
ATO Responded
No, this brushless motor cannot run at low speeds of 30 rpm for a long time, it should be more than 500rpm to get such required smooth and stability. But you can add a gearbox to get a 30 rpm speed operation for a long time and maintain required smooth operation and stability as well.
What material is the housing of the brushless motor gearbox made of?
5
Zacksisk
Avatar
11/24/2021 8:25 PM
For your gear box, what is the housing and main material made from?
Was this review helpful? Yes No (0/0)
ATO Responded
The housing of the gearbox is made of die-cast aluminum, and the main material is made of KK alloy copper.
A question about brushless motors
5
Icona
Avatar
12/27/2021 7:51 PM
I'd like to know if there is a possibility to customize 5kW 48V/72V/96V brushless DC motor with encoder on motor shaft.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can add the encoder to the BLDC motor shaft, but no connection with motor controller.
Can ATO provide a 5hp BLDC motor?
5
Rachelb
Avatar
1/23/2022 10:52 PM
We need a 5hp BLDC motor with speed that needs to be constant with no load and full load. Can you provide?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can. The motor speed can be constant, and the controller with CAN is used to control the motor and, of course, the speed of the motor can be adjusted.
We need to use your 10 kW BLDC motor.
5
Luise
Avatar
1/26/2022 6:18 PM
We need to use your 10kW BLDC motor but with 48VDC, can it be?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, it cannot be 48VDC due to high power capacity (10kW). It can be only 96V.
High performance 10kW 96V BLDC motor
5
txx
Avatar
5/24/2022 12:33 AM
10kW brushless DCmotor with smooth running, lots of power, have not had it long but so far it looks extremely well, it is used to spin a heavy flywheel.
Was this review helpful? Yes No (0/0)
What is the stall effiency of the motor 10kW BLDC motor?
5
beck
Avatar
6/13/2023 2:17 AM
Alright
Do you at ATO have PMDC motors that are capable of recharging the battery when braking the load?
No.
Is it this efficiency if I run it at 144 Watts?  
No, it should differ.
What can I expect? Just need a estimated value unless you have a graph.
Yes, will check the graph with our technical dept, and feedback you by email late of today.
What is your available DC voltage?
72V
Perfect, thanks. Will you see for the controller as well?
What is the stall efficiency of the motor 10kW BLDC motor, SKU: ATO-BLDC-10KR2?
Was this review helpful? Yes No (0/0)
ATO Responded
The brushless motor ATO-BLDC-10KR2 can not work at 144W, and the minimum power needs to be 1KW.
What is the efficiency at 1kW DC motor?
5
molly
Avatar
6/15/2023 9:36 PM
Thanks for that. What is the efficiency at 1kW?
And what torque and RPM will it have?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we have not tested.
We do not provide specific torque, RPM and efficiency.
Inductance.
5
Jimothy
Avatar
11/9/2023 7:49 AM
This motor would fit our task quite well in theory, however we are required to run simulations of our system before the final decision in terms of what motor is to be used can be made.
For this we need a value of the motors inductance and since I was not able to locate any such value in the provided data sheets, would you be able to provide this value for us?
Thank you kindly.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the 10kW brushless DC motor inductance is 0.073mH.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

10kW high power BLDC motor for sales, 72V/96V DC working voltage, 50 Nm high holding torque, peak torque up to 110 Nm. 2000 rpm, IP65 rating with shaft seal, brushless design for long life. Brushless DC motor kit (BLDC motor with the controller and gearbox) offers a great combination of durability, efficiency, torque and speed at affordable price. In general, it would be more cost-effective to buy a complete set of our BLDC motors.

Basic Specifications

  • Model: ATO-220WDM50020 (Click to see the motor drawings)
  • Matched Controller Model: ATO-KBL / ATO-KEB (Click to the product page)
  • Rated Power: 10000W
  • Rated Voltage: 72V DC / 96V DC (Optional)
  • Rated Current: 163A at 72V, 122A at 96V
  • Phase: 3 phase
  • Holding Torque: 50 Nm
  • Peak Torque: 110 Nm
  • Rated Speed: 2000 rpm
  • No-load Speed: 2400 rpm
  • Square Flange Size: 220 mm
  • Weight: 70 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Length: 40-50mm
  • Insulation Grade: F
  • Protection Grade: IP65
  • Motor Lead Length: 30 cm, if you buy a kit (motor+controller), an extra 1 meter of wire shall be provided.
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    10kW brushless DC motor is three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    BLDC motor works with a matching controller (ATOTH-G) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless DC motor works with a gearbox (choose inline gearbox or right angle gearbox with gear ratio from 3:1 to 200:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    10kW 72V/96V BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

Power Wire

RedYellowBlue
Motor UMotor VMotor W

Feedback Wire

Hall Line ColorOrange and BlackOrangeYellowBlueGreen
Hall Signal Definition5V0VHall AHall BHall C
Plug Serial Number12345


Dimension (Unit: mm)

10kw 2000rpm bldc motor size

Details

10KW Brushless DC Motor Details

Tips: More introduction about 10kW brushless DC motor

10 kW 2000rpm powerful brushless DC motor features high torque, compact shape, low load noise and long service life. With its high power, it can be applied in industrial machinery, boat, car, traction motor, pump, bus A/C systems, etc. As no brush in brushless DC motor, the friction is greatly reduced during running, and spark radio interference also decreased. Generally, brushless DC motors are high efficiency, no spark in running and smooth operation. What's more, 50Nm high torque brushless DC motor is long life, low maintenance cost. There are no brushes in BLDC which will wear out or break and need to be replaced, which makes the BLDC much longer service life and inexpensive.

Product reviews
I would like to purchase your 10kW 96V BLDC motor
5
David Sonna
Avatar
4/29/2020 7:36 PM
1. I would like to purchase your 10kW 96V BLDC motor, my main issue is that the high-power motors readily available are too loud, what is the noise level for yours?
2. Do you provide customized the BLDC motor shaft?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The sound is very very low, it is below 55 decibels!
2. Yes, We can customize motor shaft based on your needs. May you provide a hand made sketch showing shaft length, diameter, and keyway length/depth?
Operating temperature of 10kW brushless DC motor
5
Hertwig
Avatar
5/19/2021 9:24 PM
Can I use your 10kW BLDC motor outside -20-30°С?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our (10KW 96V 2000rpm) can be used outside -20-30 ° С with no problem at all.
Can ATO's brushless DC motors be customized?
5
Dekett
Avatar
6/24/2021 11:50 PM
We require a 170 volt dc rating BLDC motor. My controller produces 170volts dc and requires a motor able to operate in that environment. Can you customize?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide.
High quality 10kW high torque brushless DC motor
5
Tabyrinth
Avatar
9/3/2021 2:25 AM
Is this motor able to operate at 30RPM and higher for more than an hour? RPM has to be smooth and pretty stable. ——10kW high torque brushless DC motor
Was this review helpful? Yes No (0/0)
ATO Responded
No, this brushless motor cannot run at low speeds of 30 rpm for a long time, it should be more than 500rpm to get such required smooth and stability. But you can add a gearbox to get a 30 rpm speed operation for a long time and maintain required smooth operation and stability as well.
What material is the housing of the brushless motor gearbox made of?
5
Zacksisk
Avatar
11/24/2021 8:25 PM
For your gear box, what is the housing and main material made from?
Was this review helpful? Yes No (0/0)
ATO Responded
The housing of the gearbox is made of die-cast aluminum, and the main material is made of KK alloy copper.
A question about brushless motors
5
Icona
Avatar
12/27/2021 7:51 PM
I'd like to know if there is a possibility to customize 5kW 48V/72V/96V brushless DC motor with encoder on motor shaft.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can add the encoder to the BLDC motor shaft, but no connection with motor controller.
Can ATO provide a 5hp BLDC motor?
5
Rachelb
Avatar
1/23/2022 10:52 PM
We need a 5hp BLDC motor with speed that needs to be constant with no load and full load. Can you provide?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can. The motor speed can be constant, and the controller with CAN is used to control the motor and, of course, the speed of the motor can be adjusted.
We need to use your 10 kW BLDC motor.
5
Luise
Avatar
1/26/2022 6:18 PM
We need to use your 10kW BLDC motor but with 48VDC, can it be?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, it cannot be 48VDC due to high power capacity (10kW). It can be only 96V.
High performance 10kW 96V BLDC motor
5
txx
Avatar
5/24/2022 12:33 AM
10kW brushless DCmotor with smooth running, lots of power, have not had it long but so far it looks extremely well, it is used to spin a heavy flywheel.
Was this review helpful? Yes No (0/0)
What is the stall effiency of the motor 10kW BLDC motor?
5
beck
Avatar
6/13/2023 2:17 AM
Alright
Do you at ATO have PMDC motors that are capable of recharging the battery when braking the load?
No.
Is it this efficiency if I run it at 144 Watts?  
No, it should differ.
What can I expect? Just need a estimated value unless you have a graph.
Yes, will check the graph with our technical dept, and feedback you by email late of today.
What is your available DC voltage?
72V
Perfect, thanks. Will you see for the controller as well?
What is the stall efficiency of the motor 10kW BLDC motor, SKU: ATO-BLDC-10KR2?
Was this review helpful? Yes No (0/0)
ATO Responded
The brushless motor ATO-BLDC-10KR2 can not work at 144W, and the minimum power needs to be 1KW.
What is the efficiency at 1kW DC motor?
5
molly
Avatar
6/15/2023 9:36 PM
Thanks for that. What is the efficiency at 1kW?
And what torque and RPM will it have?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we have not tested.
We do not provide specific torque, RPM and efficiency.
Inductance.
5
Jimothy
Avatar
11/9/2023 7:49 AM
This motor would fit our task quite well in theory, however we are required to run simulations of our system before the final decision in terms of what motor is to be used can be made.
For this we need a value of the motors inductance and since I was not able to locate any such value in the provided data sheets, would you be able to provide this value for us?
Thank you kindly.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the 10kW brushless DC motor inductance is 0.073mH.
Only registered users can write reviews