1 hp (0.75 kW) magnetic drive pump is the use of magnets can attract ferromagnetic material and magnetic force between magnets or magnetic fields, can be no contact through the non-magnetic conductor for power transmission.
Features:
- ETFE (carbon-fiber reinforced) wetted-end material.
- Able to handle many types of chemical and temperature up to 90 ℃.
- Available in flange connections.
Specification:
| Model | ATO-351PW-F | |
| Specific Gravity | 1.2 | |
| Rated Voltage | 3-phase 380V (please contact us for other voltages) | |
| Frequency | 50Hz, 60Hz | |
| Pump performance at specific point (M-L/min) | 50Hz | 15-100 |
| 60Hz | 17-80 | |
| Motor Output | 1 HP (0.75 kW) | |
| Flange Size | 25 mm (outlet); 25 mm (inlet) | |
| Casing Material | ETFE | |
| Shaft Material | ceramic | |
| Bearing Material | carbon | |
| O-ring Material | FKM | |
| Interface Mode | thread, flange | |
| Net Weight | 25kg | |
Structure:

Dimension (Unit: mm)

| Model | W | H | L | a | b | c | d | e | f |
| 351PW-F | 160 | 257 | 470 | 240 | 130 | 170 | 130 | 115 | 88 |
Tips: What is Magnetic Drive Pump?
Mag drive pump is seal-less pump that use the technology of a drive magnet and inner magnet connected to an impeller to move fluid through the pump. The drive magnet and inner magnet are separated by a rear casing or housing, creating a seal-less containment. Instead of a mechanical seal, the pump uses a magnetic coupling to transmit the power from the motor to the impeller. This allows the pump to be completely sealed, which prevents leaks and contamination of the fluid being pumped.