1 hp (0.75kW) 3 phase 4 pole AC Induction Motor

$409.52
Three-phase AC induction motor or asynchronous motor for sale, 1 hp or 0.75kW rated output, 4-pole number, 1390rpm rated speed, and rated voltages 380V 50Hz. Cheap 3-phase induction motor is designed with optimum structure, high reliability, low noise and convenient to operate.
SKU: ATO-IM-7504P
Availability: In stock
Free Shipping
Delivery date: 6-12 days

1 hp (0.75kW) 3-phase 4-pole AC induction electric motor is widely used in various kinds of general purpose machineries like fans, pumps, compressors, machine tools, gearboxes, transportation and so on. Low cost and manufacturer direct sale.

1hp Induction Motor Specification

BasicsModelATO-Y2-80M2-4
Design StandardIEC
Weight15kg
Frame Type80M
MountingHorizontal Foot Mounting (B3)
Wiring MethodOutput≤4hp (3kW), Y connection
Output≥5.5hp (4kW), Delta connection
Degree of protectionIP54/IP55
Insulation ClassClass F
CoolingTEFC(compliance to IC 411 code of IEC 60034-6)
Technical ParametersNominal Output1hp or 0.75kW
Pole Number4-pole
Nominal Speed1390rpm
Frequency50Hz
Nominal Voltage380V (Y connection by default) / 220V (Change Y to Δ connection on your own)
Nominal Current (full load)2.05A/3.55A
Efficiency73%
Power Factor( cosφ)0.76
Nominal Torque (Tn)5.15Nm
Locked Rotor Torque/Nominal Torque (TST/Tn)2.3
Maximum Torque/Nominal Torque (Tmax/Tn)2.3
Locked Rotor Current/Nominal Current (IST/In)6.0
Noise Level58dB/(A)
EnvironmentAmbient Temperature-15℃+40℃
AltitudeLess than 1000m above sea level

3-phase Induction Motor Dimensions
3-phase AC induction motor dimensions

Frame TypeMounting Dimensions (mm)Overall Dimensions
AA/2BCDEFGHKABACADHDL
80M12562.5100501940615.58010165175145220295

Wiring Diagrams (Three-phase squirrel-cage induction motor)
3 phase induction motor wiring connection diagram

Details

750W AC Induction Motor Dtails

Tips: What is an induction motor or asynchronous motor?

An induction motor or asynchronous motor is an AC electric motor. When the induction motor running, there is relative motion between the rotating magnetic field and rotor windings in the air gap, and the induction current in the rotor windings under the effect of electromagnetic induction produces the electromagnetic torque, so as to achieve the conversion of electrical and mechanical energy.

The stator of the induction motor is not the rotational part of motor, and its main task is to produce a rotating magnetic field. The rotating magnetic field is not achieved by the mechanical method, but by means of that the AC in the several pairs of electromagnets makes the nature of the magnetic pole change circularly, which is equivalent to a rotating magnetic field. The rotor is a rotatable conductor, mostly showing the shape of squirrel caged. Rotor winding is divided into two types of squirrel-cage and wound.
Under normal circumstances, the rotor speed of the induction motor is always slightly lower than the speed of the rotating magnetic field (synchronous speed), so the induction motor is also known as the asynchronous motor.

3 Phase Induction Motor Wiring

In this video, ATO takes a 1hp (0.75kW) 220V/380V induction motor as example to explain the motor wiring. ATO first changes the wiring of induction motor from star connection to delta connection. When the induction motor is connected in delta connection, the rated voltage of motor is 220V, and when connected in star connection, the rated voltage is 380V. To demonstrate this change clearly, the induction motor is also connected to ATO 1-phase in 3-phase out VFD and it runs normally under the control of VFD.

Three-phase Motor to Single-phase (380V to 220V)

If a frequency converter is beyond your budget or availability, one way to run a three-phase motor from single-phase power is to use capacitors. In this tutorial, the step-by-step process of adapting a motor for single-phase operation is demonstrated by showing the correct capacitor sizing and wiring configuration.

Two-wire Control Wiring of VFD Forward Motor with Push Button

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Three-phase Motor Forward and Reverse Wiring and PLC Programming

To achieve forward and reverse rotation of a three-phase asynchronous motor, you only need to swap the positions of any two phase wires. (Single-phase asynchronous motors need to be wired according to the instructions to achieve forward and reverse rotation).

Product reviews
3 phase AC induction motor for replacing old one
5
Konstantin
Avatar
12/16/2019 6:21 PM
I want to buy your 3 phase AC induction motor to connect with a pump, how can I verify it the same shaft as the older one?
Was this review helpful? Yes No (0/0)
ATO Responded
Please tell us your old motor shaft diameter and then we can check if it is same with our new one.
Motor requirements
5
Obiya
Avatar
3/23/2026 2:49 AM
The motor I need to buy must meet the following requirements: NA | Number of phases: 3 | Output power: 1 hp | Output power: 0.75 kW | Voltage: 230/460 volts and 190/380 volts | Speed: 1760 rpm and 1450 rpm.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do not have a motor of the same brand and model. You can refer to our ATO-Y2-80M2-4 motor to see if it meets your requirements.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

1 hp (0.75kW) 3-phase 4-pole AC induction electric motor is widely used in various kinds of general purpose machineries like fans, pumps, compressors, machine tools, gearboxes, transportation and so on. Low cost and manufacturer direct sale.

1hp Induction Motor Specification

BasicsModelATO-Y2-80M2-4
Design StandardIEC
Weight15kg
Frame Type80M
MountingHorizontal Foot Mounting (B3)
Wiring MethodOutput≤4hp (3kW), Y connection
Output≥5.5hp (4kW), Delta connection
Degree of protectionIP54/IP55
Insulation ClassClass F
CoolingTEFC(compliance to IC 411 code of IEC 60034-6)
Technical ParametersNominal Output1hp or 0.75kW
Pole Number4-pole
Nominal Speed1390rpm
Frequency50Hz
Nominal Voltage380V (Y connection by default) / 220V (Change Y to Δ connection on your own)
Nominal Current (full load)2.05A/3.55A
Efficiency73%
Power Factor( cosφ)0.76
Nominal Torque (Tn)5.15Nm
Locked Rotor Torque/Nominal Torque (TST/Tn)2.3
Maximum Torque/Nominal Torque (Tmax/Tn)2.3
Locked Rotor Current/Nominal Current (IST/In)6.0
Noise Level58dB/(A)
EnvironmentAmbient Temperature-15℃+40℃
AltitudeLess than 1000m above sea level

3-phase Induction Motor Dimensions
3-phase AC induction motor dimensions

Frame TypeMounting Dimensions (mm)Overall Dimensions
AA/2BCDEFGHKABACADHDL
80M12562.5100501940615.58010165175145220295

Wiring Diagrams (Three-phase squirrel-cage induction motor)
3 phase induction motor wiring connection diagram

Details

750W AC Induction Motor Dtails

Tips: What is an induction motor or asynchronous motor?

An induction motor or asynchronous motor is an AC electric motor. When the induction motor running, there is relative motion between the rotating magnetic field and rotor windings in the air gap, and the induction current in the rotor windings under the effect of electromagnetic induction produces the electromagnetic torque, so as to achieve the conversion of electrical and mechanical energy.

The stator of the induction motor is not the rotational part of motor, and its main task is to produce a rotating magnetic field. The rotating magnetic field is not achieved by the mechanical method, but by means of that the AC in the several pairs of electromagnets makes the nature of the magnetic pole change circularly, which is equivalent to a rotating magnetic field. The rotor is a rotatable conductor, mostly showing the shape of squirrel caged. Rotor winding is divided into two types of squirrel-cage and wound.
Under normal circumstances, the rotor speed of the induction motor is always slightly lower than the speed of the rotating magnetic field (synchronous speed), so the induction motor is also known as the asynchronous motor.

Product reviews
3 phase AC induction motor for replacing old one
5
Konstantin
Avatar
12/16/2019 6:21 PM
I want to buy your 3 phase AC induction motor to connect with a pump, how can I verify it the same shaft as the older one?
Was this review helpful? Yes No (0/0)
ATO Responded
Please tell us your old motor shaft diameter and then we can check if it is same with our new one.
Motor requirements
5
Obiya
Avatar
3/23/2026 2:49 AM
The motor I need to buy must meet the following requirements: NA | Number of phases: 3 | Output power: 1 hp | Output power: 0.75 kW | Voltage: 230/460 volts and 190/380 volts | Speed: 1760 rpm and 1450 rpm.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do not have a motor of the same brand and model. You can refer to our ATO-Y2-80M2-4 motor to see if it meets your requirements.
Only registered users can write reviews
Customers who bought this item also bought

1 hp (0.75 kW) VFD, 3 Phase 230V, 400V, 480V

GK3000-4T0007G
$206.49
Favorable price 1 hp (0.75 kW) VFD, three phase 230V/400V/480V 50Hz/60Hz for selection, sensorless vector variable frequency drive, RS485 enabled, strong overload capacity, manufacturer direct sale.

24V DC 4.5A 100W Switching Power Supply

ATO-SMPS-100-24
$58.15
Low price 24V DC switching power supply has universal AC input voltage (selected by a switch), 4.5A rated current and 108W rated power, cooling by free air convection, short circuit and overload protection, ideal SMPS power supply for all kinds of applications.