Note: Horizontal-up mounting is the default. Please contact us if you require a different mounting orientation.
The tilt sensor detects angular changes in machinery, platforms, construction equipment, and industrial automation systems. Its compact structure supports easy integration into equipment for position monitoring, leveling, alignment, and motion control.
Specification
| Basic Specifications | ||||
| Model | ATO-LVT532T | ATO-LVT533T | ATO-LVT542T | |
| Measurement Range | ±180° | ±180° | ±90° | |
| Measurement Axis | X Axes | X Axes | X, Y Axes | |
| Frequency Response | DC response, 100 Hz | |||
| Resolution | 0.01° @ 5 Hz bandwidth | |||
| Accuracy | -40–85℃, 0.1° | |||
| Long-Term Stability | -40–85℃, 0.1° | |||
| Power-On Start-Up Time | 0.5s | |||
| Output Signal | Relay/ RS232/ TTL/ RS485 | |||
| MTBF | ≥55000 hours (per cycle) | |||
| Shock Resistance | 3500g, 0.5ms, 3 times per axis | |||
| Vibration Resistance | 10grms, 10–1000Hz | |||
| Insulation Resistance | ≥100MΩ | |||
| IP Rating | IP67 | |||
| Cable | Standard 1.5 m wear-resistant, oil-resistant, wide-temperature-range shielded cable, 5 × 0.3 mm2 | |||
| Weight | 150g (excluding packaging) | |||
| Electrical Specifications | ||||
| Supply Voltage | Standard | 9–36 V | ||
| Custom | 5 V | |||
| Operating Current | 20 mA | |||
| Maximum Surge Current | 1000 mA | |||
| Operating Temperature | -40–85 °C | |||
| Storage Temperature | -55–100 °C | |||
| Switching Specifications (Electromagnetic Relay) | ||||
| Switching Load | 5 A, 30 VDC / 250 VAC | |||
| Maximum Switching Current | 5 A | |||
| Maximum Switching Voltage | 250 VAC / 30 VDC | |||
| Maximum Switching Power | 1250 VA / 350 W | |||
| Operate Time | 10 ms (max.) | |||
| Release Time | 5 ms (max.) | |||
| Service Life | 1 × 106 cycles (no load); 1 × 105 cycles (with load) | |||
| Note: The electromagnetic relay version is recommended for applications involving prolonged exposure to strong magnetic fields. Customized relay options are available. | ||||
| Switching Specifications (Solid-State Relay) | ||||
| Switching Load | AC 75–264 V | |||
| Maximum Switching Current | 1 A | |||
| Minimum Switching Current | 0.1 A | |||
| Maximum Switching Voltage | AC 75–264 V | |||
| Maximum Switching Power | 250 VA | |||
| Operate Time | 2 ms (max.) | |||
| Release Time | 2 ms (max.) | |||
| Service Life | Unlimited | |||
| Note: The AC solid-state relay version supports AC signals only. Other signal types can be customized according to application requirements. | ||||
Feature
- Single/Dual-Axis Configurations: The MEMS tilt sensor supports different axis configurations to suit diverse inclination monitoring requirements.
- Compact Design: The small form factor simplifies installation and integration into industrial equipment.
- Wide Temperature Operation: The operating temperature range of −40°C to 85°C supports use in demanding environments.
- Shock Resistance: The industrial tilt sensor withstands mechanical shock up to 3,500 g for 0.5 ms, helping maintain performance under sudden impacts.
- Vibration Resistance: Resistance to 10 grms vibration over 10–1,000 Hz supports use in machinery and mobile equipment.
- Industrial Applications: The tilt sensor supports leveling, platform angle monitoring, equipment alignment, and position control.
Size (unit: mm)

Wiring
ATO-LVT532T
| RED | BLACK | GREEN | YELLOW | Blue | Brown |
| 1 | 2 | 3 | 4 | 5 | 6 |
| VCC | GND | RS232RXD/ RS485 (B、D-) | RS232TXD/ RS485 (A、D+) | Relay1 Out | Relay1 IN |

ATO-LVT533T ATO-LVT542T
| RED | BLACK | GREEN | YELLOW | Blue | Brown | WHITE | GREY |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| VCC | GND | RS232RXD/ RS485 (B、D-) | RS232TXD/ RS485 (A、D+) | Relay1 Out | Relay1 IN | Relay2 IN | Relay2 Out |

Tips: How Can I Improve Tilt Sensor Measurement Stability?
To improve measurement stability, I need to mount the tilt sensor on a rigid, level surface and secure all fixing points to prevent unwanted movement. I should minimize external vibration and mechanical impacts during measurement. For dynamic applications, I also need to consider the equipment's motion conditions and select a suitable response frequency to balance measurement stability and response speed.