Tilt Sensor, Switch Output, Single/Dual Axis, ±90°/±180°

$184.46
This tilt sensor combines accurate static and dynamic tilt measurement with switch or relay output for automatic alarm and control. With 0.1° static and 0.5° dynamic accuracy, it is ideal for industrial machinery, vehicles, and safety monitoring.
SKU: ATO-TS-SO
*
*
*
Free Shipping
Delivery date: 6-12 days

Featuring DC 9–36V input, IP67 protection, and -40 to +85°C operation, this tilt sensor provides reliable performance under shock and vibration. Single-axis models support ±180°  and dual-axis models support ±90° measurement for applications such as forklift balance control, aerial work platforms, pile drivers, and solar tracking.

Specification

ModelATO-MK421TATO-MK422TATO-MK442TATO-MK444T
Measurement Range±180°90°
Measurement AxisX-axis (Y-axis optional)X-axis、Y-axis
Alarm Axis
Frequency Response100 Hz (DC response)
Accuracy0.1° (Static)
0.5° (Dynamic)
Power-up Start Time0.2 s
Output SignalSwitching (voltage) output; RS232, TTL, RS485 optional simultaneously
Relay (NO/NC) output; RS232, TTL, RS485 optional simultaneously
Mean Time To Failure (MTTF)≥50000 hours
Shock Resistance4500g, 0.5ms, 3 cycles per axis
Vibration Resistance10grms, 10~1000Hz
Insulation Resistance≥100MΩ
Ingress ProtectionIP67 (IP68 customizable)
CableStandard 1.5m wear-resistant, oil-proof, wide-temperature shielded cable, 8*0.3mm²
Weight75g (excluding package)
DimensionL66*W56*H29MM
Mounting OrientationHorizontal, Upward (Other options, contact us)
Electrical Specifications
Supply VoltageMin. 9V
Typ. 12V
Max. 36V
Operating Current35mA
Max. NC Current1000mA
Operating Temperature-40℃~+85℃
Storage Temperature-55℃~+100℃
Switch Specifications (Electromagnetic Relay)
Switching Load5A 30VDC, 250VAC
Max. Switching Current5A
Max. Switching Voltage250VAC, 30VDC
Max. Switching Power1250VA/350W
Operate Time10 ms (Max.)
Release Time5 ms (Max.)
Life Expectancy1×10⁶ cycles (No-load); 1×10⁵ cycles (With load)
NoteKeep the product away from strong magnetic fields during use. The relay can be customized according to customer requirements.
Switch Specifications (Solid State Relay)
Switching LoadAC 75-264V
Max. Switching Current1A
Min. Switching Current0.1A
Max. Switching VoltageAC 75-264V
Max. Switching Power Dissipation250VA
Turn-on Time2 ms (Max)
Turn-off Time2 ms (Max)
Service LifeUnlimited
NoteAC solid state relay, only for AC electrical signal switching. Other signal types can be customized upon customer request.
Mechanical Characteristics
ConnectorLead wire (1.5m), waterproof aviation plug customizable
Ingress Protection RatingIP67
Housing MaterialSandblasted & oxidized aluminum alloy
Mounting4 pcs M4 screws


Features

  1. Dynamic & Static Tilt Measurement: The tilt sensor automatically switches between dynamic and static algorithms according to operating conditions, maintaining reliable angle measurement for both stationary and moving equipment.
  2. Precise Angle Detection: With 0.1° static accuracy and 0.5° dynamic accuracy, this tilt sensor provides dependable tilt monitoring for applications where accurate angle detection is essential.
  3. Flexible Alarm & Control: A user-defined alarm threshold allows the tilt sensor to trigger relay or voltage switch outputs when the preset angle is exceeded, enabling automatic alarms and equipment control.
  4. Single or Dual-Axis Measurement: The sensor supports single or dual-axis measurement with ±180°or ±90°ranges, providing flexible options for different installation orientations and monitoring requirements.
  5. Suitablefor Demanding Applications: Featuring IP67 protection, -40 to +85°C operating temperature, 4500g shock resistance and 10 g rms vibration resistance, this industrial tilt sensor works reliably on vehicles, construction machinery and in other harsh working conditions.

Dimension (unit: mm)

switch output tilt sensor single dual axis dimensions

Wiring

ATO-MK421T

Wire FunctionRedBlackGreenYellowBlueBrown
123456
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X Relay OutX Relay IN
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X Out/

switch output tilt sensor single dual axis wiring_1

ATO-MK422T

Wire FunctionRedBlackGreenYellowBlueBrownWhiteGrey
12345678
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X+ Relay OutX+ Relay InX- Relay OutX- Relay In
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X+ V OutX- V Out//

switch output tilt sensor single dual axis wiring_2

ATO-MK442T

Wire FunctionRedBlackGreenYellowBlueBrownWhiteGrey
12345678
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X Relay OutX Relay InY Relay OutY Relay In
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X V OutY V Out

switch output tilt sensor single dual axis wiring_3

ATO-MK444T

Wire FunctionRedBlackGreenYellowBlueBrownWhiteGrey
12345678
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X- (2 wire)X+ (2 wire)Y+ (2 wire)Y- (2 wire)
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X- Relay OutX+ Relay OutY+ Relay OutY- Relay Out

switch output tilt sensor single dual axis wiring_4

Tips: How do static and dynamic tilt sensors differ?

Static tilt sensors primarily measure inclination based on gravity and are best suited to stationary or slowly moving equipment. When a sensor experiences acceleration, vibration, or shock, these external forces can affect the measurement.
Dynamic tilt sensors are designed for moving or vibrating equipment. They typically combine accelerometer and gyroscope data through sensor-fusion algorithms to compensate for the effects of external acceleration and provide more reliable tilt measurements during motion.
Choose a static tilt sensor when the equipment remains relatively stable, and a dynamic tilt sensor when the equipment is subject to movement, vibration, acceleration, or shock. For equipment that switches between stationary and moving conditions, a tilt sensor with both static and dynamic measurement can provide more consistent monitoring. This sensor uses a dynamic/static fusion algorithm to automatically apply the appropriate measurement method according to the operating condition, making it suitable for vehicles, construction machinery, aerial work platforms, and other moving equipment.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Featuring DC 9–36V input, IP67 protection, and -40 to +85°C operation, this tilt sensor provides reliable performance under shock and vibration. Single-axis models support ±180°  and dual-axis models support ±90° measurement for applications such as forklift balance control, aerial work platforms, pile drivers, and solar tracking.

Specification

ModelATO-MK421TATO-MK422TATO-MK442TATO-MK444T
Measurement Range±180°90°
Measurement AxisX-axis (Y-axis optional)X-axis、Y-axis
Alarm Axis
Frequency Response100 Hz (DC response)
Accuracy0.1° (Static)
0.5° (Dynamic)
Power-up Start Time0.2 s
Output SignalSwitching (voltage) output; RS232, TTL, RS485 optional simultaneously
Relay (NO/NC) output; RS232, TTL, RS485 optional simultaneously
Mean Time To Failure (MTTF)≥50000 hours
Shock Resistance4500g, 0.5ms, 3 cycles per axis
Vibration Resistance10grms, 10~1000Hz
Insulation Resistance≥100MΩ
Ingress ProtectionIP67 (IP68 customizable)
CableStandard 1.5m wear-resistant, oil-proof, wide-temperature shielded cable, 8*0.3mm²
Weight75g (excluding package)
DimensionL66*W56*H29MM
Mounting OrientationHorizontal, Upward (Other options, contact us)
Electrical Specifications
Supply VoltageMin. 9V
Typ. 12V
Max. 36V
Operating Current35mA
Max. NC Current1000mA
Operating Temperature-40℃~+85℃
Storage Temperature-55℃~+100℃
Switch Specifications (Electromagnetic Relay)
Switching Load5A 30VDC, 250VAC
Max. Switching Current5A
Max. Switching Voltage250VAC, 30VDC
Max. Switching Power1250VA/350W
Operate Time10 ms (Max.)
Release Time5 ms (Max.)
Life Expectancy1×10⁶ cycles (No-load); 1×10⁵ cycles (With load)
NoteKeep the product away from strong magnetic fields during use. The relay can be customized according to customer requirements.
Switch Specifications (Solid State Relay)
Switching LoadAC 75-264V
Max. Switching Current1A
Min. Switching Current0.1A
Max. Switching VoltageAC 75-264V
Max. Switching Power Dissipation250VA
Turn-on Time2 ms (Max)
Turn-off Time2 ms (Max)
Service LifeUnlimited
NoteAC solid state relay, only for AC electrical signal switching. Other signal types can be customized upon customer request.
Mechanical Characteristics
ConnectorLead wire (1.5m), waterproof aviation plug customizable
Ingress Protection RatingIP67
Housing MaterialSandblasted & oxidized aluminum alloy
Mounting4 pcs M4 screws


Features

  1. Dynamic & Static Tilt Measurement: The tilt sensor automatically switches between dynamic and static algorithms according to operating conditions, maintaining reliable angle measurement for both stationary and moving equipment.
  2. Precise Angle Detection: With 0.1° static accuracy and 0.5° dynamic accuracy, this tilt sensor provides dependable tilt monitoring for applications where accurate angle detection is essential.
  3. Flexible Alarm & Control: A user-defined alarm threshold allows the tilt sensor to trigger relay or voltage switch outputs when the preset angle is exceeded, enabling automatic alarms and equipment control.
  4. Single or Dual-Axis Measurement: The sensor supports single or dual-axis measurement with ±180°or ±90°ranges, providing flexible options for different installation orientations and monitoring requirements.
  5. Suitablefor Demanding Applications: Featuring IP67 protection, -40 to +85°C operating temperature, 4500g shock resistance and 10 g rms vibration resistance, this industrial tilt sensor works reliably on vehicles, construction machinery and in other harsh working conditions.

Dimension (unit: mm)

switch output tilt sensor single dual axis dimensions

Wiring

ATO-MK421T

Wire FunctionRedBlackGreenYellowBlueBrown
123456
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X Relay OutX Relay IN
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X Out/

switch output tilt sensor single dual axis wiring_1

ATO-MK422T

Wire FunctionRedBlackGreenYellowBlueBrownWhiteGrey
12345678
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X+ Relay OutX+ Relay InX- Relay OutX- Relay In
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X+ V OutX- V Out//

switch output tilt sensor single dual axis wiring_2

ATO-MK442T

Wire FunctionRedBlackGreenYellowBlueBrownWhiteGrey
12345678
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X Relay OutX Relay InY Relay OutY Relay In
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X V OutY V Out

switch output tilt sensor single dual axis wiring_3

ATO-MK444T

Wire FunctionRedBlackGreenYellowBlueBrownWhiteGrey
12345678
Relay (NO/ NC)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X- (2 wire)X+ (2 wire)Y+ (2 wire)Y- (2 wire)
Voltage (Switch Quantity)VCCGNDRS232 RXD or RS485 (B, D-)RS232 TXD or RS485 (A, D+)X- Relay OutX+ Relay OutY+ Relay OutY- Relay Out

switch output tilt sensor single dual axis wiring_4

Tips: How do static and dynamic tilt sensors differ?

Static tilt sensors primarily measure inclination based on gravity and are best suited to stationary or slowly moving equipment. When a sensor experiences acceleration, vibration, or shock, these external forces can affect the measurement.
Dynamic tilt sensors are designed for moving or vibrating equipment. They typically combine accelerometer and gyroscope data through sensor-fusion algorithms to compensate for the effects of external acceleration and provide more reliable tilt measurements during motion.
Choose a static tilt sensor when the equipment remains relatively stable, and a dynamic tilt sensor when the equipment is subject to movement, vibration, acceleration, or shock. For equipment that switches between stationary and moving conditions, a tilt sensor with both static and dynamic measurement can provide more consistent monitoring. This sensor uses a dynamic/static fusion algorithm to automatically apply the appropriate measurement method according to the operating condition, making it suitable for vehicles, construction machinery, aerial work platforms, and other moving equipment.

Only registered users can write reviews