After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.
Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.
Tension and compression load cells have capacity range from 500kg, 5 ton, 30 ton, 50 ton to 100 ton.
Specification
| Model | ATO-LCST-TJH-4B |
| Shipping Weight | 1.5~60kg |
| Capacity Range * | 500 kg~200 ton |
| Matched Display Controller | ATO-TY5DA3 (Click it to the controller page) |
| Matched Transmitter | ATO-LCTR-NTB3K (Click it to the transmitter page) |
| Accuracy | 0.05%F.S (linearity + hysteresis + repeatability) |
| Sensitivity | 2.0±0.1mV/V |
| Creep | ±0.05%F.S/30min |
| Zero Output | ±1%F.S |
| Temperature Effect on Zero | ±0.05%F.S/10℃ |
| Temperature Effect on Output | ±0.05%F.S/10℃ |
| Operating Temperature | -20℃~+65℃ |
| Input Impedance | 380±10Ω or 750±15Ω |
| Output Impedance | 350±3Ω or 700±5Ω |
| Insulation Resistance | ≥5000MΩ |
| Safety Overload | 150%F.S |
| Bridge Voltage (excitation voltage) | DC 5~10V |
| Response Time | 3-4ms |
| Material | Alloy steel (Default) or stainless steel |
| Protection Class | IP67 |
| Cable Length | 3m (<5 ton), 6m (≥5 ton) |
| Wiring | EXC+: Red, EXC-: Black, SIG+: Green, SIG-: White |
Feature

- High-Quality Alloy Steel: Ensures durability, high strength, and resistance to wear and tear for long-lasting performance.
- High Measurement Accuracy: Offers precise and stable measurements for reliable force detection.
- Waterproof Connector: Uses a waterproof connector to reduce mechanical shock and ensure secure, stable signal transmission.
- Easy Installation: Designed for easy installation with convenient mounting holes and straightforward setup.
- Wide Range of Applications: Suitable for various industrial uses, including force measurement in manufacturing, weighing, and testing systems.
Dimension
| Capacity | Dimension (mm) | ||||||
| ΦA | ΦB | ΦC | ΦF | M | H | E | |
| 500kg~7 ton | 105 | 88.9 | 6.5 | 32 | M16*1.5 | 37 | 34 |
| 10~25 ton | 125 | 101.6 | 8.5 | 39 | M32*1.5 | 52 | 48 |
| 30~50 ton | 145 | 116.8 | 10.5 | 50 | M40*1.5 | 58 | 54 |
| 60~100 ton | 205 | 162 | 12.5 | 80 | M60*2 | 85 | 78 |
| 200 ton | 296 | 245 | 22 | 136 | M90*3 | 105 | 100 |

Accessories dimension (accessories can be purchased in drop-down lists)
| Capacity | Compression head dimension (mm) | ||||
| Φ | L1 | L | M | SR | |
| 500kg~7 ton | 31 | 13 | 28 | M16*1.5 | 80 |
| 10~25 ton | 38 | 24 | 51 | M32*1.5 | 120 |
| 30~50 ton | 50 | 32 | 62 | M40*1.5 | 200 |
| 60~100 ton | 80 | 42 | 80 | M60*2 | 280 |

Load cell module dimension (*module needs to be purchased separately)
| Capacity | Dimension (mm) | ||||||
| L | L1 | A | A1 | H | H1 | Φ | |
| 500kg~7 ton | 160 | 135 | 115 | 90 | 100 | 20 | 11 |
| 10~25 ton | 200 | 160 | 160 | 125 | 145 | 25 | 13 |
| 30~50 ton | 240 | 200 | 180 | 135 | 175 | 30 | 17 |
| 60~100 ton | 300 | 260 | 240 | 200 | 240 | 35 | 17 |

Wiring Method

Application

Tips: What kind of maintenance does the Tension/Compression Load Cell require?
Regular maintenance includes checking the load cell for signs of mechanical wear, corrosion, or damage. It’s important to inspect the connectors, wiring, and mounting system to ensure everything is secure. Periodic recalibration should also be done to ensure accurate measurements, especially after heavy use or exposure to extreme conditions.
Capacity: 5 tons.
Yes, I understand that, but I’m asking what the displacement (amount of movement from its original position) that the load cell experiences under maximum load.
How much is the minimum measurable load?
What is the measurement increment?
Applied Reference Master As Found (UUT) Supply Voltage (UUT)
KN mV DC V DC
0.0 16.293 12.00
1.0 16.706 12.00
2.0 17.250 12.00
3.0 17.748 12.00
4.0 18.202 12.00
5.0 18.666 12.00
6.0 19.170 12.00
7.0 19.652 12.00
8.0 20.115 12.00
9.0 20.639 12.00
10.0 21.171 12.00
20.0 26.027 12.00
30.0 30.894 12.00
40.0 35.785 12.00
50.0 40.648 12.00
When we try calibrating the weight, we get a message that says error 1.
We're calibrating using a 0.5 kg weight.
Can you help us get past this error?
I've followed all the steps shown in the video, applied a weight of 1188 kg (between 5-10% of the 20-ton capacity), and am now getting error 2, see the attached video.
What should I do? If you can have someone call me and do this live with me that would be best.
I'm getting my info about it from this link:
https://www.ato.com/compression-load-cell-low-profile-200kg-to-100-ton?affiliate=shopping
I have a question on this product SKU: ATO-LC-P02
What is the minimum reading range of the 1000 kg load cell?
And are there any other configurations available such as support where the device is placed?
Please send all specs of this item.
Hello, I bought this model and it has got 5 wires.
red black - green white and yellow ones.
From the datasheet, I see that the yellow one is not mentioned
the yellow one is thicker.
That hole has internal threads.
What is the purpose of the yellow wire?
What is the input voltage?
What is the depth of the counterbore?