Compression Force Sensor, Ring Type, 0.5kN-200kN

$193.99
Compression force sensor, ring type for sale, with optional capacities of 0.5kN, 1kN, 2kN, 5kN, 10KN, 20kN, 50kN, 100kN, 200kN, has an output sensitivity of 1.0 ± 10% mV/V and a zero output of ±2%F.S. Made from stainless steel, the higher quality load cell has an impedance of 700Ω and insulation of ≥5000MΩ/100VDC. The operating voltage is 5-15V, and it performs within a temperature range of -20°C to 80°C. Hollow design, the main measurement of extrusion force, assembly interference detection and control of other industrial control force detection.
SKU: ATO-FS-HX004
*
*
*
Free Shipping
Delivery date: 8-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

The compression force sensor has a capacity range of 0.5-200kN, with optional capacities from 0.5kN to 200kN. It features a sensitivity of 1.0 ± 10% mV/V, zero output of ±2%F.S., and high accuracy with 0.3%F.S. non-linearity and hysteresis. With its hollow design, it is ideal for measuring extrusion force, assembly interference, and other industrial force control applications.

Specification

ModelATO-DYHX-004
Capacity0.5-200kN (optional 0.5/1/2/5/10/20/50/100/200kN)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Output Sensitivity1.0 +10% mV/V
Zero Output±2%F.S.
Non-linearity0.3%F.S.
Hysteresis0.3%F.S.
Repeatability0.1%F.S.
Creep (30 min)0.1%F.S.
Temperature Effect on Output0.1%F.S./10°C
Temperature Effect on Zero0.1%F.S./10°C
MaterialStainless Steel
Impedance700Ω
Insulation≥5000MΩ/100VDC
Operating Voltage5-15V
Operating Temperature Range-20 to 80°C
Safety Overload120%
Maximum Overload200%
Cable SpecificationsΦ5×3m


Feature

Compression force sensor ring type feature

  • Material: Made from high-quality stainless steel, ensuring durability and resistance to corrosion.
  • Sealed Design: Compression force sensor has tight welding and sealing for oil-proof, water-proof, and corrosion-resistant properties, making it suitable for harsh environments.
  • High Strength: The use of premium stainless steel ensures excellent machine resistance, good heat dissipation, and a longer service life.
  • Wide Range of Applications: Primarily used for measuring compressive force in hollow designs, such as pressure detection and control for various industrial forces.
  • Versatile Measurement: Ideal for applications in extrusion force measurement, assembly interference detection, and other industrial force control systems.
  • Customization Options: Available in a wide range of capacities from 0.5KN to 200KN, with customizable diameters (4-16mm or 7-30mm).

Dimension (unit: mm)

Compression force sensor size 1

Capacity (kN)0.5125
Diameter (mm)4-16 (Customizable)

Compression force sensor size 2

Capacity (kN)102050100200
Diameter (mm)7-30 (Customizable)


Force Mode

Compression force sensor force mode

Wiring Method

Load cell wiring

Installation Case

Compression force sensor installation case

Tips: What are the advantages of using a ring-type sensor over other designs?

The ring-type compression force sensor offers unique advantages, particularly in applications where the force needs to be applied in a circular or cylindrical manner. One of the main benefits is its ability to be installed around cylindrical objects, making it ideal for measuring forces on shafts, pipes, or other circular components. This design also minimizes the need for additional mechanical attachments and provides a more uniform distribution of force across the sensor. Additionally, ring-type sensors are often easier to integrate into systems where space is limited or where the force measurement needs to be taken at a specific point around the object.

Causes and Solutions for Load Cell Drift

In this video, we discuss several common causes of load cell drift and share with you some possible solutions. After watching it, you may find it helpful to ensure the accuracy of your load cells and weighing systems.

Weighing Monitoring System

In this video, you are introduced to a weighing monitoring system using PLC, HMI and load cell.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

In this video, ATO offers a variety of load cells and weigh modules designed for your applications.

Product reviews
Durable Compression Force Sensor
5
Arew
Avatar
1/19/2025 11:10 PM
I recently purchased this Compression Force Sensor and the user experience is very good! Firstly, the quality of the sensor is excellent, with a compact design, sturdy structure, and strong durability, fully meeting our daily work needs. The sensitivity of the sensor is also very high, which can accurately detect changes in various compressive forces and perform very stably in both high-intensity and low-intensity applications.
Was this review helpful? Yes No (0/0)
Protection Rating
5
Theron
Avatar
11/13/2025 11:52 PM
What is the IP protection rating of the ATO-FS-HX004 load cell?
Was this review helpful? Yes No (0/0)
ATO Responded
The default protection rating of the ATO-FS-HX004 load cell is IP65, but a maximum protection rating of IP67 can be customized.
Assistance with Calibration
5
Yukos
Avatar
9/9/2026 3:07 AM
Hello, could you please assist me in calibrating this 50kN compression load ring sensor (paired with an 800-A2 display controller)?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, we calibrated the display controller before it left the factory. What issue are you encountering now that requires recalibration?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

The compression force sensor has a capacity range of 0.5-200kN, with optional capacities from 0.5kN to 200kN. It features a sensitivity of 1.0 ± 10% mV/V, zero output of ±2%F.S., and high accuracy with 0.3%F.S. non-linearity and hysteresis. With its hollow design, it is ideal for measuring extrusion force, assembly interference, and other industrial force control applications.

Specification

ModelATO-DYHX-004
Capacity0.5-200kN (optional 0.5/1/2/5/10/20/50/100/200kN)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Output Sensitivity1.0 +10% mV/V
Zero Output±2%F.S.
Non-linearity0.3%F.S.
Hysteresis0.3%F.S.
Repeatability0.1%F.S.
Creep (30 min)0.1%F.S.
Temperature Effect on Output0.1%F.S./10°C
Temperature Effect on Zero0.1%F.S./10°C
MaterialStainless Steel
Impedance700Ω
Insulation≥5000MΩ/100VDC
Operating Voltage5-15V
Operating Temperature Range-20 to 80°C
Safety Overload120%
Maximum Overload200%
Cable SpecificationsΦ5×3m


Feature

Compression force sensor ring type feature

  • Material: Made from high-quality stainless steel, ensuring durability and resistance to corrosion.
  • Sealed Design: Compression force sensor has tight welding and sealing for oil-proof, water-proof, and corrosion-resistant properties, making it suitable for harsh environments.
  • High Strength: The use of premium stainless steel ensures excellent machine resistance, good heat dissipation, and a longer service life.
  • Wide Range of Applications: Primarily used for measuring compressive force in hollow designs, such as pressure detection and control for various industrial forces.
  • Versatile Measurement: Ideal for applications in extrusion force measurement, assembly interference detection, and other industrial force control systems.
  • Customization Options: Available in a wide range of capacities from 0.5KN to 200KN, with customizable diameters (4-16mm or 7-30mm).

Dimension (unit: mm)

Compression force sensor size 1

Capacity (kN)0.5125
Diameter (mm)4-16 (Customizable)

Compression force sensor size 2

Capacity (kN)102050100200
Diameter (mm)7-30 (Customizable)


Force Mode

Compression force sensor force mode

Wiring Method

Load cell wiring

Installation Case

Compression force sensor installation case

Tips: What are the advantages of using a ring-type sensor over other designs?

The ring-type compression force sensor offers unique advantages, particularly in applications where the force needs to be applied in a circular or cylindrical manner. One of the main benefits is its ability to be installed around cylindrical objects, making it ideal for measuring forces on shafts, pipes, or other circular components. This design also minimizes the need for additional mechanical attachments and provides a more uniform distribution of force across the sensor. Additionally, ring-type sensors are often easier to integrate into systems where space is limited or where the force measurement needs to be taken at a specific point around the object.

Product reviews
Durable Compression Force Sensor
5
Arew
Avatar
1/19/2025 11:10 PM
I recently purchased this Compression Force Sensor and the user experience is very good! Firstly, the quality of the sensor is excellent, with a compact design, sturdy structure, and strong durability, fully meeting our daily work needs. The sensitivity of the sensor is also very high, which can accurately detect changes in various compressive forces and perform very stably in both high-intensity and low-intensity applications.
Was this review helpful? Yes No (0/0)
Protection Rating
5
Theron
Avatar
11/13/2025 11:52 PM
What is the IP protection rating of the ATO-FS-HX004 load cell?
Was this review helpful? Yes No (0/0)
ATO Responded
The default protection rating of the ATO-FS-HX004 load cell is IP65, but a maximum protection rating of IP67 can be customized.
Assistance with Calibration
5
Yukos
Avatar
9/9/2026 3:07 AM
Hello, could you please assist me in calibrating this 50kN compression load ring sensor (paired with an 800-A2 display controller)?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, we calibrated the display controller before it left the factory. What issue are you encountering now that requires recalibration?
Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

6 Digit Display Controller for Load Cells

ATO-DPM-DY800
$327.09
6 digit display controller can be used with load cells, force sensors and weighing sensors, 4-20mA or 0-10V transmitting signal output. This digital panel meter can display gross, net, peak and valley value alternately. Software with RS485 communication cable allows you to log the data on a PC.

2-Passage Rotary Joint, Pneumatic/Electrical Slip Ring, G1/8" Thread Port

ATO-RTJT-3002
$225.92
2-passage rotary union, pneumatic/electrical slip ring can 360° rotate transfer fluid mediums including compressed air, vacuum, water, steam, oil, hydraulic and other gas/fluid. For power/current/signal transmission, circuits can select 6/12/24/36/56 wires 2A or 12/24 wires 5A. G1/8" port for 6~8mm pipes. Combination of circuit wires and current can be customized.