Wireless Transmission Module for Inclination Sensor

$124.16
Buy wireless transmission module, this transmission module will embed the protocol stack inside the module, automatic networking after power on, applied to wireless inclination sensor, using RS232/RS485 interface output, support 2.4GHz wireless band, users can adjust the frequency range according to demand. After high and low temperature test, it can work in -40°C~70°C environment with high reliability.
SKU: ATO-IMS-S2630
*
Free Shipping
Delivery date: 6-12 days

Wireless transmission module adopts highly reliable design for wireless tilt sensor, built-in 2.4GHz wireless band (band adjustable), users can realize 2405~2480MHz frequency customization through the serial port command to meet the personalized needs. The wireless transmission module is equipped with RS232 and RS485 output interfaces as standard, and the transmission distance can reach up to 1600 meters, and the protection level is up to IP66, which is dust-proof, water-proof, cold-proof and acid-proof.

Specifications

ModelATO-ATO-HMS2630
Output InterfaceRS232, RS485 optional
Matched Inclinometer SensorATO-IMS-HMI600
Wireless Frequency2.4GHz (2460MHz), user can change the frequency band (2405MHz ~ 2480MHz, step: 5MHz) via serial command, corresponding band 11-26 optional
Serial Format8-N-1 (default), 8-E-1, 8-O-1 can be set.
Baud Rate9600bps (default), settable 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps
Transmission DistanceVisual, open, transmission distance 1600 meters
Antenna FormatBuilt-in customization required (please contact us)
Receiving Sensitivity-98dBm
Configurable NodeConfigurable as Coordinator, Router, End Device
Power-on Start Time0.5s
Response Time0.01s
Radio Frequency2450MHZ (default), 2450~2480 adjustable
Average Operating Time≥55000 hours/time
Protection ClassDust-proof, waterproof, cold-resistant, hydrochloric acid-resistant
Waterproof GradeIP66
Supply Voltage5V
Current DrawWorking mode: 20-200mA
Sleep mode: 18mA
Built-in Battery Capacity5000mAh
Operating Temperature-40°C~+85°C
Storage Temperature-55°C~+125°C
ConnectorLead wire 0.5m
Housing MaterialEngineering plastics
MountingFour M4 screws
Weight85g (without box)

Note: This product is to be used with a wireless inclinometer sensor!

Connection Method

Wireless transmission module connection method

Wireless Transmission Example Diagram

  • RS485 Transmission Multi-node Data Acquisition

rs485 transmission multi-node data acquisition

  • RS232 Point to Point Data Acquisition

rs232 point-to-point data acquisition

Wiring Diagram

Electrical ConnectionLine Color Function
12345
RedWhiteBlackGreenYellow
RS232VCCNCGNDRXDTXD
RS485VCCNCGND(B, D-)(A, D+)

Note: The NC wire color function is a reserved wire, which is not connected by the user during use. RS485 transmission multi-node transmission, RS232 point-to-point transmission.

Application

Wireless transmission module application

Tips: Wireless transmission module features

  1. Simple and Easy to Use: The two wireless transmission modules can be compared to a serial line, similar to the wired serial port.
  2. Automatic Networking: Power on the module self-organizing network, without human intervention.
  3. Transmission Method: Multi-point transmission and point-to-point transmission can be selected at will.
  4. High Security: 128bit wireless data encryption, users can set the key to prevent data leakage and prevent unauthorized nodes from obtaining network data.
  5. Strong Flexibility: Module node type can be configured as coordinator or router, and wireless channel can be specified.
  6. Signal Strength: You can query the relative strength of the module signal.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Wireless transmission module adopts highly reliable design for wireless tilt sensor, built-in 2.4GHz wireless band (band adjustable), users can realize 2405~2480MHz frequency customization through the serial port command to meet the personalized needs. The wireless transmission module is equipped with RS232 and RS485 output interfaces as standard, and the transmission distance can reach up to 1600 meters, and the protection level is up to IP66, which is dust-proof, water-proof, cold-proof and acid-proof.

Specifications

ModelATO-ATO-HMS2630
Output InterfaceRS232, RS485 optional
Matched Inclinometer SensorATO-IMS-HMI600
Wireless Frequency2.4GHz (2460MHz), user can change the frequency band (2405MHz ~ 2480MHz, step: 5MHz) via serial command, corresponding band 11-26 optional
Serial Format8-N-1 (default), 8-E-1, 8-O-1 can be set.
Baud Rate9600bps (default), settable 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps
Transmission DistanceVisual, open, transmission distance 1600 meters
Antenna FormatBuilt-in customization required (please contact us)
Receiving Sensitivity-98dBm
Configurable NodeConfigurable as Coordinator, Router, End Device
Power-on Start Time0.5s
Response Time0.01s
Radio Frequency2450MHZ (default), 2450~2480 adjustable
Average Operating Time≥55000 hours/time
Protection ClassDust-proof, waterproof, cold-resistant, hydrochloric acid-resistant
Waterproof GradeIP66
Supply Voltage5V
Current DrawWorking mode: 20-200mA
Sleep mode: 18mA
Built-in Battery Capacity5000mAh
Operating Temperature-40°C~+85°C
Storage Temperature-55°C~+125°C
ConnectorLead wire 0.5m
Housing MaterialEngineering plastics
MountingFour M4 screws
Weight85g (without box)

Note: This product is to be used with a wireless inclinometer sensor!

Connection Method

Wireless transmission module connection method

Wireless Transmission Example Diagram

  • RS485 Transmission Multi-node Data Acquisition

rs485 transmission multi-node data acquisition

  • RS232 Point to Point Data Acquisition

rs232 point-to-point data acquisition

Wiring Diagram

Electrical ConnectionLine Color Function
12345
RedWhiteBlackGreenYellow
RS232VCCNCGNDRXDTXD
RS485VCCNCGND(B, D-)(A, D+)

Note: The NC wire color function is a reserved wire, which is not connected by the user during use. RS485 transmission multi-node transmission, RS232 point-to-point transmission.

Application

Wireless transmission module application

Tips: Wireless transmission module features

  1. Simple and Easy to Use: The two wireless transmission modules can be compared to a serial line, similar to the wired serial port.
  2. Automatic Networking: Power on the module self-organizing network, without human intervention.
  3. Transmission Method: Multi-point transmission and point-to-point transmission can be selected at will.
  4. High Security: 128bit wireless data encryption, users can set the key to prevent data leakage and prevent unauthorized nodes from obtaining network data.
  5. Strong Flexibility: Module node type can be configured as coordinator or router, and wireless channel can be specified.
  6. Signal Strength: You can query the relative strength of the module signal.
Only registered users can write reviews