Wearable Wireless IMU Sensor with Bluetooth, 100Hz

$105.88
High-performance wearable wireless IMU streams real-time motion data at a 100Hz output rate. An integrated Bluetooth IMU sensor provides cable-free operation for mobile applications. Performance features include ±500°/sec gyro range and ±8G accelerometer range. Rugged design offers 100g shock resistance and IP65 waterproof rating. With 98,000 hours MTBF, the cheap wearable Bluetooth IMU ensures reliable operation in demanding environments.
SKU: ATO-IMU-100BL
Free Shipping
Delivery date: 6-12 days

Low cost 100Hz wearable wireless inertial measurement unit provides industrial IMU orientation data, delivering roll, pitch, and magnetic heading angles. Dynamic tilt accuracy is better than 0.5 degrees. This AHRS IMU functionality supports both 6-axis and 9-axis fusion modes.

Specification

Basic Parameters
ModelATO-IMU100-BL
Power Supply VoltageDC 3.0 - 4.2 V
Power Consumption50 mA (Typical)
Output InterfaceUSB 2.0
ConnectorType-C Connector
Operating Temperature-5 °C ~ +55 °C
Storage Temperature-10 °C ~ +55 °C
Mean Time Between Failures (MTBF)≥ 98,000 hours
Shock Resistance100g @ 11ms, Three Axes (Half-Sine Wave)
Vibration Resistance10 g_rms, 10 ~ 1000 Hz
Waterproof RatingIP65
Weight≤ 35 g (excluding cable)
Azimuth
Measurement Range±180° (Gyro or Magnetic Azimuth configurable)
Measurement Accuracy (RMS) @25°C< 1.5° (Under non-magnetic interference)
Resolution< 0.1°
Tilt (Inclination)
Measurement RangeRoll ±180°, Pitch ±90°
Measurement Accuracy (RMS) @25°C< ±0.5° (Dynamic), < ±0.2° (Static)
Resolution< 0.1°
Gyroscope
Measurement Range±500 °/sec
Bias Instability @25°C< 200 °/hr
Resolution< 0.1 °/sec
Bandwidth> 100 Hz
Accelerometer
Measurement Range±8 G
Resolution< 10 mg
Bandwidth> 100 Hz
Magnetometer
Measurement Range±8 Gauss
Resolution< 2.5 mGauss
Bandwidth14 - 17 Hz


Features

  • Sensor fusion: 9-axis IMU integrates gyroscope, accelerometer, and magnetometer for full orientation data.
  • Wireless performance: Bluetooth 5.1 enables reliable robot navigation IMU connectivity up to 40 meters.
  • Data accuracy: Advanced Kalman filtering ensures stable and precise attitude output.
  • Update rate: A 100Hz output provides real-time motion tracking for dynamic applications.
  • Durability: This MEMS IMU offers excellent vibration performance and drift stability.
  • Additional features: Built-in temperature sensor and Flash IAP support parameter retention.
  • Design benefits: Low noise, light weight, and high cost-effectiveness enhance usability.
  • Output flexibility: Supports both USB 2.0 wired communication and wireless data streaming.

Dimension

Wireless IMU sensor dimension

Details

Wireless IMU sensor details

  1. NO/OFF Button: Press the button to power on, press the button to power off.
  2. Indicator Light Status: Rapidly flashing red LED: The red LED flashes rapidly when powered on, indicating connection to a Bluetooth host.
    Solid red LED: The red LED remains solid after connection to the host.
    Slowly flashing red LED: The red LED flashes slowly when the battery is low, and the device automatically powers off after 30 seconds.
    Solid green LED: The green LED remains solid while charging.
  3. Type-C Charging Port: A 5V charging plug is recommended. Charging time is approximately 4 hours, and the theoretical working time is 8 hours.

Working Principle

Wireless IMU sensor working principle

Application

Wireless IMU sensor application

Tips: What is the difference between the 6-axis and 9-axis IMU modes?

In 6-axis mode (gyro+accel), the azimuth angle is relative and will drift over time. In 9-axis mode (gyro+accel+magnetometer), the IMU system provides a stable, absolute magnetic heading, but requires a non-magnetic interference environment for accuracy.

Product reviews
Durability and long-term reliability
5
Eleanor
Avatar
11/24/2025 11:42 PM
I’ve been using this wearable bluetooth IMU sensor for a while, and it has impressed me with its stable 100 Hz real-time data output and reliable wireless performance. The Bluetooth connection stays solid during movement, and the sensor’s rugged build—along with its IP65 waterproof rating—gives me confidence when using it outdoors or in tougher environments. Its ±500°/sec gyro range and ±8G accelerometer range provide accurate motion data for my project, and even after a few accidental drops, it still works perfectly. For such an affordable device, the durability and long-term reliability are outstanding, making it a great value for mobile motion-tracking applications.
Was this review helpful? Yes No (0/0)
Reliable performance
5
Grant
Avatar
2/10/2026 6:33 PM
Performs reliably, with Bluetooth connectivity remaining stable within 20 meters. IP65 protection and impact-resistant design make it suitable for outdoor use.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost 100Hz wearable wireless inertial measurement unit provides industrial IMU orientation data, delivering roll, pitch, and magnetic heading angles. Dynamic tilt accuracy is better than 0.5 degrees. This AHRS IMU functionality supports both 6-axis and 9-axis fusion modes.

Specification

Basic Parameters
ModelATO-IMU100-BL
Power Supply VoltageDC 3.0 - 4.2 V
Power Consumption50 mA (Typical)
Output InterfaceUSB 2.0
ConnectorType-C Connector
Operating Temperature-5 °C ~ +55 °C
Storage Temperature-10 °C ~ +55 °C
Mean Time Between Failures (MTBF)≥ 98,000 hours
Shock Resistance100g @ 11ms, Three Axes (Half-Sine Wave)
Vibration Resistance10 g_rms, 10 ~ 1000 Hz
Waterproof RatingIP65
Weight≤ 35 g (excluding cable)
Azimuth
Measurement Range±180° (Gyro or Magnetic Azimuth configurable)
Measurement Accuracy (RMS) @25°C< 1.5° (Under non-magnetic interference)
Resolution< 0.1°
Tilt (Inclination)
Measurement RangeRoll ±180°, Pitch ±90°
Measurement Accuracy (RMS) @25°C< ±0.5° (Dynamic), < ±0.2° (Static)
Resolution< 0.1°
Gyroscope
Measurement Range±500 °/sec
Bias Instability @25°C< 200 °/hr
Resolution< 0.1 °/sec
Bandwidth> 100 Hz
Accelerometer
Measurement Range±8 G
Resolution< 10 mg
Bandwidth> 100 Hz
Magnetometer
Measurement Range±8 Gauss
Resolution< 2.5 mGauss
Bandwidth14 - 17 Hz


Features

  • Sensor fusion: 9-axis IMU integrates gyroscope, accelerometer, and magnetometer for full orientation data.
  • Wireless performance: Bluetooth 5.1 enables reliable robot navigation IMU connectivity up to 40 meters.
  • Data accuracy: Advanced Kalman filtering ensures stable and precise attitude output.
  • Update rate: A 100Hz output provides real-time motion tracking for dynamic applications.
  • Durability: This MEMS IMU offers excellent vibration performance and drift stability.
  • Additional features: Built-in temperature sensor and Flash IAP support parameter retention.
  • Design benefits: Low noise, light weight, and high cost-effectiveness enhance usability.
  • Output flexibility: Supports both USB 2.0 wired communication and wireless data streaming.

Dimension

Wireless IMU sensor dimension

Details

Wireless IMU sensor details

  1. NO/OFF Button: Press the button to power on, press the button to power off.
  2. Indicator Light Status: Rapidly flashing red LED: The red LED flashes rapidly when powered on, indicating connection to a Bluetooth host.
    Solid red LED: The red LED remains solid after connection to the host.
    Slowly flashing red LED: The red LED flashes slowly when the battery is low, and the device automatically powers off after 30 seconds.
    Solid green LED: The green LED remains solid while charging.
  3. Type-C Charging Port: A 5V charging plug is recommended. Charging time is approximately 4 hours, and the theoretical working time is 8 hours.

Working Principle

Wireless IMU sensor working principle

Application

Wireless IMU sensor application

Tips: What is the difference between the 6-axis and 9-axis IMU modes?

In 6-axis mode (gyro+accel), the azimuth angle is relative and will drift over time. In 9-axis mode (gyro+accel+magnetometer), the IMU system provides a stable, absolute magnetic heading, but requires a non-magnetic interference environment for accuracy.

Product reviews
Durability and long-term reliability
5
Eleanor
Avatar
11/24/2025 11:42 PM
I’ve been using this wearable bluetooth IMU sensor for a while, and it has impressed me with its stable 100 Hz real-time data output and reliable wireless performance. The Bluetooth connection stays solid during movement, and the sensor’s rugged build—along with its IP65 waterproof rating—gives me confidence when using it outdoors or in tougher environments. Its ±500°/sec gyro range and ±8G accelerometer range provide accurate motion data for my project, and even after a few accidental drops, it still works perfectly. For such an affordable device, the durability and long-term reliability are outstanding, making it a great value for mobile motion-tracking applications.
Was this review helpful? Yes No (0/0)
Reliable performance
5
Grant
Avatar
2/10/2026 6:33 PM
Performs reliably, with Bluetooth connectivity remaining stable within 20 meters. IP65 protection and impact-resistant design make it suitable for outdoor use.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews