Full Bridge Torque Strain Gauge

$39.32
This torque strain gauge features an integrated full-bridge design that delivers 4× higher output sensitivity for precise shaft torque measurement. With a 350Ω resistance, it ensures balanced output, reduced self-heating effects, and improved measurement stability.
SKU: ATO-SG-TFB
This product has a minimum quantity of 5
Free Shipping
Delivery date: 6-12 days

Built for durability and long-term stability, the full bridge torque strain gauge adopts constantan alloy sensitive grids combined with a phenolic resin substrate. It offers a repeatable life cycle of up to 10⁷ times, delivering excellent performance and reliability.

Specification

ModelATO-BF350-6EA
Resistance350Ω
Gauge Factor2.08
Accuracy ClassClass A
Backing MaterialPhenolic resin
Sensitive Grid MaterialConstantan (CuNi alloy)
Sensitive Grid Size6*6mm
Backing Size28.5*21.5mm
Measuring Range200000με
Operating Temperature Range-20℃ to +80℃
Lead Length30cm integrated lead + 30 cm extension lead (SM plug-in connection)
Repeated Life10⁷ cycles
ApplicationShaft torque measurement, 4× measurement sensitivity


Features

  1. Full-bridge Design: Internally integrates four sensitive grids to form a complete Wheatstone bridge, significantly enhancing signal strength and measurement accuracy.
  2. Ultra-wide Measurement Range: Spans up to 200,000 με with a sensitivity coefficient of 2.08 ± 1%. Features low linear error and high repeatability, meeting stringent data reliability requirements for scientific research and industrial-grade testing.
  3. 10⁷ Cycle Life: Constructed with constantan alloy sensitive grids and phenolic resin substrates, processed through specialized encapsulation techniques, it withstands over 10⁷ dynamic cyclic loadings.
  4. High-stability Materials and Output: 350Ω resistance combined with constantan grids and phenolic resin backing delivers reliable, stable signal performance.

Tips: How does a torque strain gauge work?

The operating principle of torque strain gauges is based on the resistive strain effect. When a shaft experiences torque, shear strain occurs on its surface. In engineering applications, strain gauges are typically bonded at ±45° angles onto the shaft surface, converting shear strain into one set of tensile strain and one set of compressive strain. The metal sensitive grid within the strain gauge undergoes changes in length and cross-sectional area due to minute material elongation or compression, thereby altering its resistance value. This resistance change is directly proportional to the strain (ΔR/R = K·ε, where K is the sensitivity coefficient and ε is the strain). When multiple strain gauges are connected in a Wheatstone bridge configuration, particularly in a full-bridge structure, the differential voltage output from tensile and compressive resistance changes significantly enhances signal strength and temperature compensation capability. Ultimately, by combining the measured strain values with the shaft's material mechanical parameters and geometric dimensions, the actual torque can be calculated, achieving precise conversion from mechanical deformation to electrical signal to physical quantity.

Product reviews
Very reliable
5
Alex
Avatar
3/30/2026 7:42 PM
Our precision testing equipment has greatly benefited from this full-bridge strain gauge. The constantan grid and sturdy construction maintain accuracy even under continuous dynamic loads. No signal distortion, only reliable data for torque analysis.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Built for durability and long-term stability, the full bridge torque strain gauge adopts constantan alloy sensitive grids combined with a phenolic resin substrate. It offers a repeatable life cycle of up to 10⁷ times, delivering excellent performance and reliability.

Specification

ModelATO-BF350-6EA
Resistance350Ω
Gauge Factor2.08
Accuracy ClassClass A
Backing MaterialPhenolic resin
Sensitive Grid MaterialConstantan (CuNi alloy)
Sensitive Grid Size6*6mm
Backing Size28.5*21.5mm
Measuring Range200000με
Operating Temperature Range-20℃ to +80℃
Lead Length30cm integrated lead + 30 cm extension lead (SM plug-in connection)
Repeated Life10⁷ cycles
ApplicationShaft torque measurement, 4× measurement sensitivity


Features

  1. Full-bridge Design: Internally integrates four sensitive grids to form a complete Wheatstone bridge, significantly enhancing signal strength and measurement accuracy.
  2. Ultra-wide Measurement Range: Spans up to 200,000 με with a sensitivity coefficient of 2.08 ± 1%. Features low linear error and high repeatability, meeting stringent data reliability requirements for scientific research and industrial-grade testing.
  3. 10⁷ Cycle Life: Constructed with constantan alloy sensitive grids and phenolic resin substrates, processed through specialized encapsulation techniques, it withstands over 10⁷ dynamic cyclic loadings.
  4. High-stability Materials and Output: 350Ω resistance combined with constantan grids and phenolic resin backing delivers reliable, stable signal performance.

Tips: How does a torque strain gauge work?

The operating principle of torque strain gauges is based on the resistive strain effect. When a shaft experiences torque, shear strain occurs on its surface. In engineering applications, strain gauges are typically bonded at ±45° angles onto the shaft surface, converting shear strain into one set of tensile strain and one set of compressive strain. The metal sensitive grid within the strain gauge undergoes changes in length and cross-sectional area due to minute material elongation or compression, thereby altering its resistance value. This resistance change is directly proportional to the strain (ΔR/R = K·ε, where K is the sensitivity coefficient and ε is the strain). When multiple strain gauges are connected in a Wheatstone bridge configuration, particularly in a full-bridge structure, the differential voltage output from tensile and compressive resistance changes significantly enhances signal strength and temperature compensation capability. Ultimately, by combining the measured strain values with the shaft's material mechanical parameters and geometric dimensions, the actual torque can be calculated, achieving precise conversion from mechanical deformation to electrical signal to physical quantity.

Product reviews
Very reliable
5
Alex
Avatar
3/30/2026 7:42 PM
Our precision testing equipment has greatly benefited from this full-bridge strain gauge. The constantan grid and sturdy construction maintain accuracy even under continuous dynamic loads. No signal distortion, only reliable data for torque analysis.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews