4-Step/5-Step Calibration Block for Ultrasonic Thickness Gauge

$238.09
A full line ultrasonic calibration block or reference test block is provided for thickness gauge, selectable 4 step, 5 step, 6 step and 10 step UT calibration block and available in both mm and inch units. High quality calibration block is made of 1018 steel, with durable ABS carrying case.
SKU: ATO-UT-B
*
Free Shipping
Delivery date: 6-12 days

Calibration blocks for ultrasonic thickness gauge are available with 4 step, 5 step, 6 step and 10 step in millimeter and inch.

Calibration Block Specification

ModelItemParameterSizeMaterial
ATO-B-101-00014 step calibration block3mm 5mm 10mm 15mm80 x 20mm1018 Steel
ATO-B-101-00120.100” 0.200” 0.400” 0.600”3.15 x 0.7in1018 Steel
ATO-B-101-00020.250” 0.500” 0.750” 1.000”3.15 x 0.8 inch1018 Steel
ATO-B-101-00135 step calibration block5mm 10mm 15mm 20mm 25mm100 x 20mm1018 Steel
ATO-B-101-00030.100” 0.200” 0.300” 0.400” 0.500”4 x 0.8 inch1018 Steel
ATO-B-101-00046 step calibration block1mm 3mm 5mm 10mm 15mm 20mm120 x 20mm1018 Steel
ATO-B-101-00052.5mm 5mm 10mm 15mm 20mm 25mm120 x 20mm1018 Steel
ATO-B-101-000610 step calibration block1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm200 x 20mm1018 Steel
ATO-B-101-00072mm 4mm 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm200 x 20mm1018 Steel
ATO-B-101-00080.100” 0.200” 0.300” 0.400” 0.500” 0.600” 0.700” 0.800” 0.900” 1.000”8 x 0.8 inch1018 Steel
ATO-B-101-00095 step calibration block2.5mm 5mm 10mm 15mm 20mm100mm1018 Steel

Tips: Why you need a calibration block for ultrasonic thickness gauge?

The ultrasonic thickness gauge is used to accurately measure the thickness of different materials under different conditions. In order to meet the requirements of the maximum accuracy measurement, a set of reference test blocks or calibration block will be very important. The closer the material of the calibration block is to the material to be tested, the more accurate the measurement. The ideal reference test block is a set of test pieces of different thicknesses of the material to be tested. The calibration block can offer the UT instrument compensation correction factors.

In most cases, using one calibration block can obtain satisfactory measurement accuracy. This reference test block should have the same material and similar thickness as the tested material.

For thin materials, when its thickness is close to the lower limit of probe measurement, the calibration block can be used to determine the exact lower limit. Do not measure materials below the lower limit of thickness. If a thickness range can be estimated, the upper limit should be chosen for the thickness of the calibration block.

As for the thick material to be tested, especially for alloys with complex internal structures, the one among the reference block that is close to the tested material should be selected, so as to facilitate calibration.

Product reviews
4-tep/5-step calibration block keeps ultrasonic thickness gauges in top shape
5
vickey
Avatar
9/3/2023 9:23 PM
The 4-step/5-step calibration block on this ultrasonic thickness gauge has been absolutely great for me! It is impressively accurate and ensures that my measurements are always reliable and accurate. The design of the calibration block is very convenient and easy to use, allowing me to complete the calibration steps quickly. Not only that, but its durability is also commendable, as I've been using it for quite some time and it still maintains excellent performance. This gadget has greatly improved my work efficiency and is reasonably priced for what it offers.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Calibration blocks for ultrasonic thickness gauge are available with 4 step, 5 step, 6 step and 10 step in millimeter and inch.

Calibration Block Specification

ModelItemParameterSizeMaterial
ATO-B-101-00014 step calibration block3mm 5mm 10mm 15mm80 x 20mm1018 Steel
ATO-B-101-00120.100” 0.200” 0.400” 0.600”3.15 x 0.7in1018 Steel
ATO-B-101-00020.250” 0.500” 0.750” 1.000”3.15 x 0.8 inch1018 Steel
ATO-B-101-00135 step calibration block5mm 10mm 15mm 20mm 25mm100 x 20mm1018 Steel
ATO-B-101-00030.100” 0.200” 0.300” 0.400” 0.500”4 x 0.8 inch1018 Steel
ATO-B-101-00046 step calibration block1mm 3mm 5mm 10mm 15mm 20mm120 x 20mm1018 Steel
ATO-B-101-00052.5mm 5mm 10mm 15mm 20mm 25mm120 x 20mm1018 Steel
ATO-B-101-000610 step calibration block1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm200 x 20mm1018 Steel
ATO-B-101-00072mm 4mm 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm200 x 20mm1018 Steel
ATO-B-101-00080.100” 0.200” 0.300” 0.400” 0.500” 0.600” 0.700” 0.800” 0.900” 1.000”8 x 0.8 inch1018 Steel
ATO-B-101-00095 step calibration block2.5mm 5mm 10mm 15mm 20mm100mm1018 Steel

Tips: Why you need a calibration block for ultrasonic thickness gauge?

The ultrasonic thickness gauge is used to accurately measure the thickness of different materials under different conditions. In order to meet the requirements of the maximum accuracy measurement, a set of reference test blocks or calibration block will be very important. The closer the material of the calibration block is to the material to be tested, the more accurate the measurement. The ideal reference test block is a set of test pieces of different thicknesses of the material to be tested. The calibration block can offer the UT instrument compensation correction factors.

In most cases, using one calibration block can obtain satisfactory measurement accuracy. This reference test block should have the same material and similar thickness as the tested material.

For thin materials, when its thickness is close to the lower limit of probe measurement, the calibration block can be used to determine the exact lower limit. Do not measure materials below the lower limit of thickness. If a thickness range can be estimated, the upper limit should be chosen for the thickness of the calibration block.

As for the thick material to be tested, especially for alloys with complex internal structures, the one among the reference block that is close to the tested material should be selected, so as to facilitate calibration.

Product reviews
4-tep/5-step calibration block keeps ultrasonic thickness gauges in top shape
5
vickey
Avatar
9/3/2023 9:23 PM
The 4-step/5-step calibration block on this ultrasonic thickness gauge has been absolutely great for me! It is impressively accurate and ensures that my measurements are always reliable and accurate. The design of the calibration block is very convenient and easy to use, allowing me to complete the calibration steps quickly. Not only that, but its durability is also commendable, as I've been using it for quite some time and it still maintains excellent performance. This gadget has greatly improved my work efficiency and is reasonably priced for what it offers.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews