Solid state relay SSR-100AA, 100A 70-280V AC to AC

$73.15
SSR-100AA single phase solid state relay 100 amp, AC to AC, control voltage 70-280V AC, load voltage 24-480V AC, zero cross switching type, panel mount, high reliability and favorable price.
SKU: ATO-SSR-DH100AA
Free Shipping
Delivery date: 6-12 days

Features

100A solid state relay (SSR) with 70-280V AC input features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-DH100AA
InputControl voltage range70-280V AC
Max. input current15mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current100A
Maximum off-state leakage current2mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, single phase
Dimension L – W – H (mm)57.4х44.8х28
Weight135g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimension (Unit: mm)

Single Phase SSR Dimensions

Wiring Diagram

Single Phase AC to AC SSR Wiring Diagram

Tips: What is a solid state relay?

A solid state relay is a non-contact switch composed of microelectronic circuits, discrete electronic devices, and electronic power devices. It is a non-contact switching device with the characteristics of relays, in which semiconductor devices are used to replace traditional electrical contacts as switching devices. Single-phase SSR is a four-terminal active device, two of which are input terminals and the others are output terminals. Optical isolation lies between them. Once the input terminal is given DC or pulse signals to a certain current value, the output terminal can be changed from off-state to on-state. It has the function of not only amplifying driving effect, but also isolation and is suitable for driving high-power switch-type actuators. Compared with the electromagnetic relay, it has higher reliability, no contact, long life, fast speed and small disturbance to the outside world and has been widely used.

Solid state relay (SSR) is simple but widely used in the automation fields. Thus, it is not complex to wire a solid state relay. In this vedio, ATO takes a 40 Amp SSR (DC - AC) for example to show the wiring of a SSR and then switch on/off a motor with this SSR.

How to Test a Solid State Relay?

Solid state relays are commonly used to control many electronic components, so if a component isn't working because there's no current flowing through it, it's likely a problem with the relay. With some simple troubleshooting steps, it's easy to check if an SSR is working as expected. In this video, we'll show you step-by-step instructions on how to test a solid state relay.

Types of Solid State Relays

There are different types of solid state relays according to various classification standards. In this video, we will introduce a series of different types of SSRs according to the following standards.

DC-AC/AC-AC Single Phase Solid State Relays

In this video we take a quick look at ATO's current single phase SSR models along with their specifications and key features. They are designed to operate high load currents using low control currents, using our advanced opto-isolation technology.

In this video we will try to clear the confusion many people have between relays and contactors by showing you how to tell the difference based on five criteria: Definition, Capacity, Structure, Contacts and Applications.

Product reviews
For booster fan
5
Enon
Avatar
12/9/2022 1:32 AM
I'm using this solid state relay for an HVAC booster fan. I used an AC circuit off my carrier furnace meant for an air purifier to trigger the relay. I will order more.
Was this review helpful? Yes No (0/0)
State relay is very fast to be hot
5
ajax
Avatar
4/6/2023 2:34 AM
Thank you for the replay. I have heat sink. The two test were in the same environment with the same load 10A. The 60A becomes light warm. This is how it suppose to be.
The 100A becomes over 80℃ in a minute.
I have a lot of other cheap SSR and they behave like yours 100A.
Very fast to get hot. Measured with thermometer. Please I want to return the faulty one.
Was this review helpful? Yes No (0/0)
ATO Responded
Is your SSR coated with thermal grease? SSR must be coated with thermal grease.
Because solid state relays will have an on-state voltage drop, the SSR will become hot when it is running. How much the SSR heats up depends on the size of the load and the working time.
In addition to the heat sink, we recommend that you also add a fan for cooling.
For other precautions, please refer to the figure below.
State relay 100A very fast to be hot
5
heard
Avatar
4/6/2023 9:33 PM
On 10/1/23 order94548 I purchased SSR 60A relay. I use it with 10A load. It works great. It barely gets warm.
On 14/2/23 order 945923 I purchased SSR 100A relay. I use it with the same 10A load. It gets very fast very hot. This is unacceptable. I believe the relay is faulty. Please let me know how we can solve this problem. Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
You need a heat sink, and the load must be equipped with a heat sink if it exceeds 5A.
Please refer to the link: https://www.ato.com/ssr-heat-sink
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

100A solid state relay (SSR) with 70-280V AC input features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-DH100AA
InputControl voltage range70-280V AC
Max. input current15mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current100A
Maximum off-state leakage current2mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, single phase
Dimension L – W – H (mm)57.4х44.8х28
Weight135g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimension (Unit: mm)

Single Phase SSR Dimensions

Wiring Diagram

Single Phase AC to AC SSR Wiring Diagram

Tips: What is a solid state relay?

A solid state relay is a non-contact switch composed of microelectronic circuits, discrete electronic devices, and electronic power devices. It is a non-contact switching device with the characteristics of relays, in which semiconductor devices are used to replace traditional electrical contacts as switching devices. Single-phase SSR is a four-terminal active device, two of which are input terminals and the others are output terminals. Optical isolation lies between them. Once the input terminal is given DC or pulse signals to a certain current value, the output terminal can be changed from off-state to on-state. It has the function of not only amplifying driving effect, but also isolation and is suitable for driving high-power switch-type actuators. Compared with the electromagnetic relay, it has higher reliability, no contact, long life, fast speed and small disturbance to the outside world and has been widely used.

Product reviews
For booster fan
5
Enon
Avatar
12/9/2022 1:32 AM
I'm using this solid state relay for an HVAC booster fan. I used an AC circuit off my carrier furnace meant for an air purifier to trigger the relay. I will order more.
Was this review helpful? Yes No (0/0)
State relay is very fast to be hot
5
ajax
Avatar
4/6/2023 2:34 AM
Thank you for the replay. I have heat sink. The two test were in the same environment with the same load 10A. The 60A becomes light warm. This is how it suppose to be.
The 100A becomes over 80℃ in a minute.
I have a lot of other cheap SSR and they behave like yours 100A.
Very fast to get hot. Measured with thermometer. Please I want to return the faulty one.
Was this review helpful? Yes No (0/0)
ATO Responded
Is your SSR coated with thermal grease? SSR must be coated with thermal grease.
Because solid state relays will have an on-state voltage drop, the SSR will become hot when it is running. How much the SSR heats up depends on the size of the load and the working time.
In addition to the heat sink, we recommend that you also add a fan for cooling.
For other precautions, please refer to the figure below.
State relay 100A very fast to be hot
5
heard
Avatar
4/6/2023 9:33 PM
On 10/1/23 order94548 I purchased SSR 60A relay. I use it with 10A load. It works great. It barely gets warm.
On 14/2/23 order 945923 I purchased SSR 100A relay. I use it with the same 10A load. It gets very fast very hot. This is unacceptable. I believe the relay is faulty. Please let me know how we can solve this problem. Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
You need a heat sink, and the load must be equipped with a heat sink if it exceeds 5A.
Please refer to the link: https://www.ato.com/ssr-heat-sink
Only registered users can write reviews