Solid state relay, 3 phase, SSR-60AA, 60A 70-280V AC to AC

$103.84
Cheap 60A AC to AC solid state relay, SSR-60AA, 3 phase, zero crossing, 70-280V AC control voltage, 24-480V AC load voltage, panel mount, strong structure and high reliability.
SKU: ATO-SSR-TH60AA
*
Free Shipping
Delivery date: 6-12 days

Features

60A 3-phase 70-280V AC to AC solid state relay (SSR) has high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH60AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current60A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Heat Sink

Product NameHeat sink for 3 phase SSRSSR 150Amp heat sink dimension
MaterialAluminum alloy
Dimension (L*W*H)150*125*135mm
Mounting SizeMounting Hole Diameter: 3mm
Groove Distance: 84mm
Weight2.1kg
Application≤150A 3 phase solid state relay

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: Interference to solid state relays

Solid state relays should be far away from electromagnetic interference and radio frequency interference source when installed and used in case of the relay’s mis-operation and out-of-control state. SSR relays are also a kind of interference source, which will produce radiation or power line interference through the load, and the degree of interference varies with the load size. The interference caused by the resistance of incandescent lamp is small, and the zero-voltage type is conducted near the zero-crossing area of the AC power supply (i.e. zero voltage), so the interference is also small. The reduction method is to install inductance coils in series in the load. In addition, cross interference should be avoided between the signal line and the power line.

3 Phase Solid State Relay DC/AC Controlled AC

This introductory video covers the specifications and features of the ATO 3 Phase SSR models. Capable of switching at zero voltage or instantaneous turn-on, these models feature back-to-back thyristor outputs and are suitable for working resistive, inductive and capacitive loads. The control voltage for this line is 3-32V DC or 70-280V AC. Load current ratings range from 10 to 120A with nominal output voltages up to 480V AC.

How to Choose the Right Solid State Relay?

In this video, we discuss the key considerations for choosing the right solid state relay.

Product reviews
Simple installation
5
Rigg
Avatar
3/3/2025 12:01 AM
I recently purchased this three-phase solid-state relay for controlling three-phase heating equipment. The installation process is very simple, the wiring terminals are firm, and the overall workmanship is good. When running for a long time, the relay will generate heat. It is recommended to pair it with suitable heat sinks or fans.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

60A 3-phase 70-280V AC to AC solid state relay (SSR) has high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH60AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current60A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Heat Sink

Product NameHeat sink for 3 phase SSRSSR 150Amp heat sink dimension
MaterialAluminum alloy
Dimension (L*W*H)150*125*135mm
Mounting SizeMounting Hole Diameter: 3mm
Groove Distance: 84mm
Weight2.1kg
Application≤150A 3 phase solid state relay

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: Interference to solid state relays

Solid state relays should be far away from electromagnetic interference and radio frequency interference source when installed and used in case of the relay’s mis-operation and out-of-control state. SSR relays are also a kind of interference source, which will produce radiation or power line interference through the load, and the degree of interference varies with the load size. The interference caused by the resistance of incandescent lamp is small, and the zero-voltage type is conducted near the zero-crossing area of the AC power supply (i.e. zero voltage), so the interference is also small. The reduction method is to install inductance coils in series in the load. In addition, cross interference should be avoided between the signal line and the power line.

Product reviews
Simple installation
5
Rigg
Avatar
3/3/2025 12:01 AM
I recently purchased this three-phase solid-state relay for controlling three-phase heating equipment. The installation process is very simple, the wiring terminals are firm, and the overall workmanship is good. When running for a long time, the relay will generate heat. It is recommended to pair it with suitable heat sinks or fans.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews