Solid state relay, 3 phase, SSR-40DA, 40A 3-32V DC to AC

$82.31
Low price 40 amp solid state relay, 3 phase SSR-40DA, DC control AC, input voltage 3-32V DC, load voltage 24-480V AC, zero cross switch type, LED working indicator, panel mount, best SSR for heavy industries.
SKU: ATO-SSR-TH40DA
Free Shipping
Delivery date: 6-12 days

Features

40A 3-phase 3-32V DC to AC solid state relay (SSR-40DA) features high structural strength, good impact resistance, and strong shock resistance. The SSR relay offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH40DA
InputControl voltage range3-32V DC
Max. input current20mA
Must operate voltage4V DC
Must release voltage2.7V DC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current40A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeDC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 3-32V DC to AC SSR Wiring Diagram

Tips: Thermal design and radiator selection of solid state relay

There is certain internal power dissipation in solid state relays’ operation. The dissipation value is mainly determined by product of output voltage drop and load current, embodied in the form of heat radiation. The quality of heat dissipation directly affects maximum load current of solid state relays and maximum allowable temperature of the working environment and it is one of the important factors that affect the reliable operation of SSRs. Therefore, we should pay attention to thermal design and radiator selection so that SSRs may work reliably and failure of and damages caused by poor heat dissipation to solid state relays can be avoided.

In general, solid state relays, whose output current is less than 5A, use natural convection air enough to achieve the purpose of cooling, but when installed, solid state relays need a good convection environment and the space between each solid state relay should not be less than the width of a SSR. It is essential for those solid state relays with a load current greater than 10 A to use suitable radiators, even forced air cooling (air speed at 6 m/s) or water-cooling if necessary. The good heat dissipation condition is very important for SSRs’ reliable work.

3 Phase Solid State Relay DC/AC Controlled AC

This introductory video covers the specifications and features of the ATO 3 Phase SSR models. Capable of switching at zero voltage or instantaneous turn-on, these models feature back-to-back thyristor outputs and are suitable for working resistive, inductive and capacitive loads. The control voltage for this line is 3-32V DC or 70-280V AC. Load current ratings range from 10 to 120A with nominal output voltages up to 480V AC.

How to Choose the Right Solid State Relay?

In this video, we discuss the key considerations for choosing the right solid state relay.

Product reviews
So far the SSR works great and no problems.
5
Gabriel
Avatar
1/3/2019 6:57 PM
I use this unit to switch a water pump on/off. The solid state relay indeed got hot while running without a heat sink. Then added a heat sink to make it running longer and safer. So far works great and no problems.
Was this review helpful? Yes No (0/0)
Can you provide heat sink with your solid state relay?
5
Madalin
Avatar
9/21/2020 7:02 PM
Can you provide heat sink with your solid state relay?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can but the price is extra.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

40A 3-phase 3-32V DC to AC solid state relay (SSR-40DA) features high structural strength, good impact resistance, and strong shock resistance. The SSR relay offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH40DA
InputControl voltage range3-32V DC
Max. input current20mA
Must operate voltage4V DC
Must release voltage2.7V DC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current40A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeDC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 3-32V DC to AC SSR Wiring Diagram

Tips: Thermal design and radiator selection of solid state relay

There is certain internal power dissipation in solid state relays’ operation. The dissipation value is mainly determined by product of output voltage drop and load current, embodied in the form of heat radiation. The quality of heat dissipation directly affects maximum load current of solid state relays and maximum allowable temperature of the working environment and it is one of the important factors that affect the reliable operation of SSRs. Therefore, we should pay attention to thermal design and radiator selection so that SSRs may work reliably and failure of and damages caused by poor heat dissipation to solid state relays can be avoided.

In general, solid state relays, whose output current is less than 5A, use natural convection air enough to achieve the purpose of cooling, but when installed, solid state relays need a good convection environment and the space between each solid state relay should not be less than the width of a SSR. It is essential for those solid state relays with a load current greater than 10 A to use suitable radiators, even forced air cooling (air speed at 6 m/s) or water-cooling if necessary. The good heat dissipation condition is very important for SSRs’ reliable work.

Product reviews
So far the SSR works great and no problems.
5
Gabriel
Avatar
1/3/2019 6:57 PM
I use this unit to switch a water pump on/off. The solid state relay indeed got hot while running without a heat sink. Then added a heat sink to make it running longer and safer. So far works great and no problems.
Was this review helpful? Yes No (0/0)
Can you provide heat sink with your solid state relay?
5
Madalin
Avatar
9/21/2020 7:02 PM
Can you provide heat sink with your solid state relay?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can but the price is extra.
Only registered users can write reviews
Customers who bought this item also bought

Solid State Relay Heat Sink for Industrial SSR/3-Phase SSR

ATO-SSR-HS
$106.15
High quality aluminum SSR heat sink is designed for 3-phase solid state relay less than 120A or industrial single phase solid state relay 60A - 350A, helpful to dissipate the heat and protect your solid state relay.