Solid state relay, 3 phase, SSR-40AA, 40A 70-280V AC to AC

$88.46
Favorable price SSR-40AA solid state relay with 40 amp load current, 3 phase SSR, 70-280V AC control voltage, 24-480V AC load voltage, zero cross, LED indicator, compact size and excellent quality.
SKU: ATO-SSR-TH40AA
Free Shipping
Delivery date: 6-12 days

Features

40A 3-phase solid state relay (SSR) with 70-280V AC to 24-480V AC features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH40AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current40A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: Over-current protection of solid state relay

Solid state relays (SSR) take semiconductor switching devices as power output components, and are sensitive to temperature changes. Over-current may overheat semiconductor chips, which results in there decreased quality, life expectancy reduction or even permanent damage. Although solid state relays (SSRs) in an instant can withstand surge current 10 times larger than the rated current, but permanent damages are likely to be caused if the current is more than such a value. Therefore, over-current protection is very important. There are many ways for over-current protection. The key is to fast response. For AC solid state relay with SCR as output devices, general protection circuits are invalid due to current zero required by SCR’s turn-off if the surge current and short-circuit current are larger than SSR’s surge current within 10 Ms (50Hz). At this moment, fast acting fuses exclusive for semiconductor devices. Fuses’ nominal fusing current should not exceed the nominal current value of the SSR. There are a variety of commercial fuses, but their quality is different. Therefore, pay attention when choosing fuses.

3 Phase Solid State Relay DC/AC Controlled AC

This introductory video covers the specifications and features of the ATO 3 Phase SSR models. Capable of switching at zero voltage or instantaneous turn-on, these models feature back-to-back thyristor outputs and are suitable for working resistive, inductive and capacitive loads. The control voltage for this line is 3-32V DC or 70-280V AC. Load current ratings range from 10 to 120A with nominal output voltages up to 480V AC.

How to Choose the Right Solid State Relay?

In this video, we discuss the key considerations for choosing the right solid state relay.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

40A 3-phase solid state relay (SSR) with 70-280V AC to 24-480V AC features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH40AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current40A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: Over-current protection of solid state relay

Solid state relays (SSR) take semiconductor switching devices as power output components, and are sensitive to temperature changes. Over-current may overheat semiconductor chips, which results in there decreased quality, life expectancy reduction or even permanent damage. Although solid state relays (SSRs) in an instant can withstand surge current 10 times larger than the rated current, but permanent damages are likely to be caused if the current is more than such a value. Therefore, over-current protection is very important. There are many ways for over-current protection. The key is to fast response. For AC solid state relay with SCR as output devices, general protection circuits are invalid due to current zero required by SCR’s turn-off if the surge current and short-circuit current are larger than SSR’s surge current within 10 Ms (50Hz). At this moment, fast acting fuses exclusive for semiconductor devices. Fuses’ nominal fusing current should not exceed the nominal current value of the SSR. There are a variety of commercial fuses, but their quality is different. Therefore, pay attention when choosing fuses.

Only registered users can write reviews
Customers who bought this item also bought

Solid State Relay Heat Sink for Industrial SSR/3-Phase SSR

ATO-SSR-HS
$106.15
High quality aluminum SSR heat sink is designed for 3-phase solid state relay less than 120A or industrial single phase solid state relay 60A - 350A, helpful to dissipate the heat and protect your solid state relay.