Solenoid Valve, 2 Way, Normally Closed, 24V/220V for steam water air

$101.38
$117.78
Economical price general purpose solenoid valve, designed for steam, water and air, two-way two-position (2/2 way), normally closed (N/C), direct-acting type, brass body and EPDM seal, able to handle fluid at high temperature up to 180℃, selectable voltage DC 24 Volt or AC 220 Volt, port sizes available for G1/2, G3/4, G1, G1¼, G1½ and G2 inches.
SKU: ATO-VALVE-2L
*
*
Free Shipping
Delivery date: 6-12 days

Note: This solenoid valve cannot be used for drinking water.

2-port 2-position solenoid valves, direct-acting mode, are used to release and shut off the media of air, water and steam with brass body and EPDM seal. The general purpose solenoid valve is normally closed (NC), i.e., the valve is switched on when the coil is energized, and switched off when the coil is de-energized. G1/2" to G2" port sizes are for your selections. High reliability, long lifespan and favorable price.

Specification

Model2L170-152L200-202L250-252L350-352L400-402L500-50
Valve Type2 Way 2 Position, Normally Closed
MediaSteam, Air, Water
Operation ModeInternal Pilot Type
Port Diameter (mm)172025354050
Flow Rate (Cv)12.617.4627.2753.4669.8369.83
Port SizeG1/2"G3/4"G1"G1¼"G1½"G2"
Operating Pressure0.1~0.8MPa (15~120psi)
Max. Pressure Resistance0.9MPa
Voltage (Optional)24V DC, 220V AC
Voltage Tolerance±10%
Operating Temperature-5~+180℃ (23~356℉)
Body MaterialBrass
Seal MaterialEPDM

Dimensions
2-Way Steam Solenoid Valve NC Dimensions

ModelDimension
A (mm)B (mm)C (mm)D (mm)K (inch)
2L170-151264214682G1/2
2L200-201254214793G3/4
2L250-251344815694G1
2L350-3514774184112G1¼
2L400-4014774184112G1½
2L500-5017090215170G2

Two-way Solenoid Valve Symbol
2-way solenoid valve symbol
Tips: Working principle of steam solenoid valve

The steam solenoid valve can be divided into Normally Closed and Normally Open solenoid valve according to the on-off state. The working principle of normally closed steam solenoid valve is as follows.

When the solenoid is energized, the armature drive the valve plug under the effect of electromagnetic force and the medium on the main valve flow away, thus reducing the pressure on the main valve. When the pressure reduces to a certain value, the armature makes the main valve opening under the pressure difference. The medium can pass through. When the solenoid is de-energized, the electromagnetic force disappears and the armature also reset. The solenoid valve is closed and the medium can’t flow. The ATO solenoid valves for steam is Normally Closed, suitable for running at the temperature from -5℃ to 180℃. On the contrary, the Normally Open solenoid valve is closed and stopping the flow of the medium when it is energized, and it is open when it is de-energized.

Working Principle and Disassembly of Solenoid Valve

In this video, we will introduce the basic working principle and disassembly process of the solenoid valve.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Good products for the price
5
Ron J.
Avatar
11/6/2018 7:41 PM
Bought three of 24v solenoid valves. Arrived fast, and they are solid. I have used these valves on my project and so far have not had any issues. The quality of the items were very good for the price.
Was this review helpful? Yes No (0/0)
Can your solenoid valves handle 200 psi of steam?
5
Shanicole W.
Avatar
1/14/2019 6:26 PM
Can your solenoid valves handle 200 psi of steam?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our steam solenoid valve operating pressure is 15~217 psi.
Simple item, yet works well.
5
Shanicole W.
Avatar
12/9/2019 7:42 PM
Purchased four of solenoid valves for controlling on/off the steam about eight months ago. So far works as expected. Wiring was easy, as the valves are 24vdc and no need to pay attention to the positive and negative. As for the installation, there is an arrow on the valve body to tell the fluid flow direction. Simple item, yet works well.
Was this review helpful? Yes No (0/0)
For this two way solenoid valve 24vdc, 1.5", can you give me amperage drawing?
5
David
Avatar
9/21/2020 6:55 PM
For this two way solenoid valve 24vdc, 1.5", can you give me amperage drawing?
Was this review helpful? Yes No (0/0)
ATO Responded
The maximum consumed current for this 24vdc, 1.5" solenoid valve is 0.7A. If the caliber of solenoid valve is larger, the current may be a little larger.
I need a replacement solenoid valve...
5
Zach
Avatar
10/29/2020 6:59 PM
I need a replacement solenoid valve for propane gas on a boat. The old (original) valve is a truma 12v DC IP54 5.5kw. Would you have a suitable replacement?
Was this review helpful? Yes No (0/0)
ATO Responded
Hi, Zach. Unfortunately, we do not provide a solenoid valve that complies with propane gas.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This solenoid valve cannot be used for drinking water.

2-port 2-position solenoid valves, direct-acting mode, are used to release and shut off the media of air, water and steam with brass body and EPDM seal. The general purpose solenoid valve is normally closed (NC), i.e., the valve is switched on when the coil is energized, and switched off when the coil is de-energized. G1/2" to G2" port sizes are for your selections. High reliability, long lifespan and favorable price.

Specification

Model2L170-152L200-202L250-252L350-352L400-402L500-50
Valve Type2 Way 2 Position, Normally Closed
MediaSteam, Air, Water
Operation ModeInternal Pilot Type
Port Diameter (mm)172025354050
Flow Rate (Cv)12.617.4627.2753.4669.8369.83
Port SizeG1/2"G3/4"G1"G1¼"G1½"G2"
Operating Pressure0.1~0.8MPa (15~120psi)
Max. Pressure Resistance0.9MPa
Voltage (Optional)24V DC, 220V AC
Voltage Tolerance±10%
Operating Temperature-5~+180℃ (23~356℉)
Body MaterialBrass
Seal MaterialEPDM

Dimensions
2-Way Steam Solenoid Valve NC Dimensions

ModelDimension
A (mm)B (mm)C (mm)D (mm)K (inch)
2L170-151264214682G1/2
2L200-201254214793G3/4
2L250-251344815694G1
2L350-3514774184112G1¼
2L400-4014774184112G1½
2L500-5017090215170G2

Two-way Solenoid Valve Symbol
2-way solenoid valve symbol
Tips: Working principle of steam solenoid valve

The steam solenoid valve can be divided into Normally Closed and Normally Open solenoid valve according to the on-off state. The working principle of normally closed steam solenoid valve is as follows.

When the solenoid is energized, the armature drive the valve plug under the effect of electromagnetic force and the medium on the main valve flow away, thus reducing the pressure on the main valve. When the pressure reduces to a certain value, the armature makes the main valve opening under the pressure difference. The medium can pass through. When the solenoid is de-energized, the electromagnetic force disappears and the armature also reset. The solenoid valve is closed and the medium can’t flow. The ATO solenoid valves for steam is Normally Closed, suitable for running at the temperature from -5℃ to 180℃. On the contrary, the Normally Open solenoid valve is closed and stopping the flow of the medium when it is energized, and it is open when it is de-energized.

Product reviews
Good products for the price
5
Ron J.
Avatar
11/6/2018 7:41 PM
Bought three of 24v solenoid valves. Arrived fast, and they are solid. I have used these valves on my project and so far have not had any issues. The quality of the items were very good for the price.
Was this review helpful? Yes No (0/0)
Can your solenoid valves handle 200 psi of steam?
5
Shanicole W.
Avatar
1/14/2019 6:26 PM
Can your solenoid valves handle 200 psi of steam?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our steam solenoid valve operating pressure is 15~217 psi.
Simple item, yet works well.
5
Shanicole W.
Avatar
12/9/2019 7:42 PM
Purchased four of solenoid valves for controlling on/off the steam about eight months ago. So far works as expected. Wiring was easy, as the valves are 24vdc and no need to pay attention to the positive and negative. As for the installation, there is an arrow on the valve body to tell the fluid flow direction. Simple item, yet works well.
Was this review helpful? Yes No (0/0)
For this two way solenoid valve 24vdc, 1.5", can you give me amperage drawing?
5
David
Avatar
9/21/2020 6:55 PM
For this two way solenoid valve 24vdc, 1.5", can you give me amperage drawing?
Was this review helpful? Yes No (0/0)
ATO Responded
The maximum consumed current for this 24vdc, 1.5" solenoid valve is 0.7A. If the caliber of solenoid valve is larger, the current may be a little larger.
I need a replacement solenoid valve...
5
Zach
Avatar
10/29/2020 6:59 PM
I need a replacement solenoid valve for propane gas on a boat. The old (original) valve is a truma 12v DC IP54 5.5kw. Would you have a suitable replacement?
Was this review helpful? Yes No (0/0)
ATO Responded
Hi, Zach. Unfortunately, we do not provide a solenoid valve that complies with propane gas.
Only registered users can write reviews