Small Gas Mass Flow Meter, Air/O2/N2, 0-2/5/50L/min

$445.58
Small gas mass flow meter is characterized with compact size, high accuracy and good repeatability, designed for low gas flow rate (0-2/ 5/ 50L/min) in the gas lines of 3mm and 8mm in diameter, easy for installation with BST1/4 (R1/4) connection, LED display instantaneous flow rate and flow accumulation, suitable for wide applications involving compressor air, O2, N2, etc.
SKU: ATO-FLOW-MF4000
*
*
Free Shipping
Delivery date: 8-12 days

Compact andlight gas mass flow meters are designed for low gas flow rate measurement in the gas pipelines of 3mm and 8mm in diameter, and have flow rate range of 0~2, 5 L/min and 0~20, 50 L/min available with BST1/4 (R1/4) connection. Featuring high sensitivity and fast response time, the gas flow meters are suitable for process gas control, environmental sampling and many other industrial applications.

Specification

ModelATO-MF4003ATO-MF4008
Flow Range *0~2, 5 L/min0~20, 50 L/min
DN3mm8mm
Gas *Air, N2O, CO2, O2, N2, Ar.
For other gases, please contact us.
Turn-down Ratio100:1
Accuracy±(1.5+0.2)% FS
Repeatibility0.25%
Zero Drift±30mV
Output Drift±0.12%/°C
Response Time10ms (default, 20, 50, 100, 200, 500, 1000 settable)
Power Supply8-24V DC, 50mA
Signal Output *Linear: Analog 1-5V DC (Standard); RS232, RS485 (Optional)
Display4-digit 7-segment LED, 2 LED indicator
Display UnitInstantaneous flow rate: SLPM, Flow accumulation: SL
Display Resolution0.001, 0.01, 0.1 L/min settable0.01, 0.1 L/min settable
Working Pressure≤0.5MPa
Pressure Loss≤100Pa≤600Pa
Working Temperature-10°C ~ +55°C
Storage Temperature-20°C ~ +65°C
Humidity<95%RH (no icing or condensation)
Keyboard3 keys
Pin Out5 Pins, NS-TECH CD R-5
Mechanical ConnectionBSPT 1/4 (R1/4)
CalibrationAir @20°C, 101.325kPa
Weight75g

Note: For N2O and CO2, ATO-MF4003 is selectable with 2 L/min, without 5 L/min; ATO-MF4008 is selectable with 20 L/min, without 50 L/min.

Dimension (unit: mm)

Gas mass flow meter dimension

Detail

Gas mass flow meter detail

Wiring Diagram Instruction

Gas mass flow meter wiring diagram instructions

PinoutThread ColorDefinition
1BlueTX, RS232 digital signal transmission / RS485B
2GreenVout, analog voltage output positive
3RedVCC, power input positive (8 - 24 Vdc)
4BlackGND, power/signal ground
5YellowRX, RS232 digital signal receive / RS485A


Application

Gas mass flow meter application

Tips: Working principle of small gas mass flow meter

A mini gas mass flow meter calculates the mass flow rate of a gas by measuring the change in heat generated by the gas as it flows through the sensor. The sensor usually consists of two temperature probes, one located before the gas flows and the other after. As the gas flows, heat is transferred from the sensor to the gas, resulting in a change in temperature. Based on this change, the flow meter is able to derive the mass flow rate of the gas.

Small gas mass flow meters are widely used in industrial gas measurement, laboratory testing, medical equipment and environmental monitoring. They are particularly suitable for applications where precise gas quality control is required, such as gas pipeline monitoring, gas consumption monitoring and gas delivery systems.

Product reviews
Ideal small gas mass flow meter
5
Delco
Avatar
8/8/2021 8:25 PM
This is an ideal small gas mass flow meter for measuring gas flow. I used it to measure the flow rate of a gas pipe with a diameter of 3mm. The measurement result is very accurate and it is a reliable product.
Was this review helpful? Yes No (0/0)
I want to ask some questions about mass flow meters.
5
Meredith
Avatar
12/13/2021 12:21 AM
Okay. I was roughly checking the manual, maybe I asked more questions. I want to measure variable flow of gas. Is it possible to sample flows like in each minute and store data? You mentioned about 485 communication, maybe you highlight me on this. Okay, I shall be waiting for you technical details.
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-FLOW-MF5700
See specs, price, and you can order online by credit card at: https://www.ato.com/digital-gas-flow-meter
For measuring variable flow of gas, it will not affect the reading of the meter as long as it does not exceed its maximum flow range, and you can store data via 485 communication.
About 485 communication, it also needs your controller or computer to support 485 communication, and you can refer to the communication protocol in the manual.
Can you offer flow meter options for my application?
5
fanny
Avatar
7/19/2023 1:01 AM
I'm actually looking to measure around 0.7 L/min with 1-2% accuracy.  
Is there any flowmeter option you offer for this application?
Was this review helpful? Yes No (0/0)
ATO Responded
You can choose our ATO-MF4000, the range is 0~2L/min, please refer to the link: https://www.ato.com/small-gas-mass-flow-meter
But it measures around 0.7 L/min with an accuracy of 2.1%, is it acceptable to you?
Can it control the flow to a specified amount with this flowmeter?
5
marge
Avatar
7/19/2023 2:23 AM
Thank you for this good information.
Can I control the flow to a specified amount with this flowmeter as well?
Or is this item just to measure the flow, and I would have to regulate the flow through valving upstream of it?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Our flowmeter can only measure.
2. Yes, you also need valves to control and regulate the flow.
Please give me some recommendations
5
Hollisen
Avatar
10/17/2024 12:24 AM
I want to fill some new double pane insulated window glass units with krypton gas. Thus, I would be using your flow meter to monitor a very slow flow rate (filling through a small 1/32" capillary tube at the bottom of the window unit while the air inside will flow out a capillary tube near the top of the unit.) The windows have a gas volume of 10 liters. I would want a flow rate around 1 liter per minute. Pressures will remain very close to atmospheric pressure. I will also be looking for a regulator to lower the bottle pressure of ~1000psi to 1 psi.
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend small gas mass flow meter, SKU: ATO-FLOW-MF4000, 0~2 L/min, please note working pressure≤0.5MPa, see spec on: https://www.ato.com/small-gas-mass-flow-meter
Analog Output
5
Waldson
Avatar
9/7/2025 8:04 PM
I ordered an ATO-MF4008 flowmeter. The manual states that the maximum analog output is 5V. However, through testing, I can see higher output values. Is the maximum output value corresponding to 50 L/min truly 5V?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, under normal circumstances, the maximum output value that corresponds to 50 L/min is really 5V. Could you please tell me what the current voltage is when it exceeds 5V? Is the flowmeter being used beyond its rated capacity?
Operating at atmospheric pressure
4
Debbies
Avatar
3/16/2026 1:12 AM
We will be operating at atmospheric pressure. Is this flow meter suitable for our application?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, for normal pressure, you can directly purchase this flow meter ATO-FLOW-MF4000.
Recommended gas flow meter
5
Kvina
Avatar
7/6/2026 12:15 AM
We need a gas flow meter similar to the ATO-FLOW-MF4000, but with an operating pressure of approximately 6-10 bar, suitable for argon, and a flow range of 0-50 L/min.
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, if the operating pressure is less than or equal to 0.8 MPa, we recommend this SKU: ATO-FLOW-MF5700, see on: https://www.ato.com/digital-gas-flow-meter. If the operating pressure is less than 1 MPa, we recommend this model SKU: ATO-FLOW-MFM, see on: https://www.ato.com/micro-gas-mass-flow-meter
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Compact andlight gas mass flow meters are designed for low gas flow rate measurement in the gas pipelines of 3mm and 8mm in diameter, and have flow rate range of 0~2, 5 L/min and 0~20, 50 L/min available with BST1/4 (R1/4) connection. Featuring high sensitivity and fast response time, the gas flow meters are suitable for process gas control, environmental sampling and many other industrial applications.

Specification

ModelATO-MF4003ATO-MF4008
Flow Range *0~2, 5 L/min0~20, 50 L/min
DN3mm8mm
Gas *Air, N2O, CO2, O2, N2, Ar.
For other gases, please contact us.
Turn-down Ratio100:1
Accuracy±(1.5+0.2)% FS
Repeatibility0.25%
Zero Drift±30mV
Output Drift±0.12%/°C
Response Time10ms (default, 20, 50, 100, 200, 500, 1000 settable)
Power Supply8-24V DC, 50mA
Signal Output *Linear: Analog 1-5V DC (Standard); RS232, RS485 (Optional)
Display4-digit 7-segment LED, 2 LED indicator
Display UnitInstantaneous flow rate: SLPM, Flow accumulation: SL
Display Resolution0.001, 0.01, 0.1 L/min settable0.01, 0.1 L/min settable
Working Pressure≤0.5MPa
Pressure Loss≤100Pa≤600Pa
Working Temperature-10°C ~ +55°C
Storage Temperature-20°C ~ +65°C
Humidity<95%RH (no icing or condensation)
Keyboard3 keys
Pin Out5 Pins, NS-TECH CD R-5
Mechanical ConnectionBSPT 1/4 (R1/4)
CalibrationAir @20°C, 101.325kPa
Weight75g

Note: For N2O and CO2, ATO-MF4003 is selectable with 2 L/min, without 5 L/min; ATO-MF4008 is selectable with 20 L/min, without 50 L/min.

Dimension (unit: mm)

Gas mass flow meter dimension

Detail

Gas mass flow meter detail

Wiring Diagram Instruction

Gas mass flow meter wiring diagram instructions

PinoutThread ColorDefinition
1BlueTX, RS232 digital signal transmission / RS485B
2GreenVout, analog voltage output positive
3RedVCC, power input positive (8 - 24 Vdc)
4BlackGND, power/signal ground
5YellowRX, RS232 digital signal receive / RS485A


Application

Gas mass flow meter application

Tips: Working principle of small gas mass flow meter

A mini gas mass flow meter calculates the mass flow rate of a gas by measuring the change in heat generated by the gas as it flows through the sensor. The sensor usually consists of two temperature probes, one located before the gas flows and the other after. As the gas flows, heat is transferred from the sensor to the gas, resulting in a change in temperature. Based on this change, the flow meter is able to derive the mass flow rate of the gas.

Small gas mass flow meters are widely used in industrial gas measurement, laboratory testing, medical equipment and environmental monitoring. They are particularly suitable for applications where precise gas quality control is required, such as gas pipeline monitoring, gas consumption monitoring and gas delivery systems.

Product reviews
Ideal small gas mass flow meter
5
Delco
Avatar
8/8/2021 8:25 PM
This is an ideal small gas mass flow meter for measuring gas flow. I used it to measure the flow rate of a gas pipe with a diameter of 3mm. The measurement result is very accurate and it is a reliable product.
Was this review helpful? Yes No (0/0)
I want to ask some questions about mass flow meters.
5
Meredith
Avatar
12/13/2021 12:21 AM
Okay. I was roughly checking the manual, maybe I asked more questions. I want to measure variable flow of gas. Is it possible to sample flows like in each minute and store data? You mentioned about 485 communication, maybe you highlight me on this. Okay, I shall be waiting for you technical details.
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-FLOW-MF5700
See specs, price, and you can order online by credit card at: https://www.ato.com/digital-gas-flow-meter
For measuring variable flow of gas, it will not affect the reading of the meter as long as it does not exceed its maximum flow range, and you can store data via 485 communication.
About 485 communication, it also needs your controller or computer to support 485 communication, and you can refer to the communication protocol in the manual.
Can you offer flow meter options for my application?
5
fanny
Avatar
7/19/2023 1:01 AM
I'm actually looking to measure around 0.7 L/min with 1-2% accuracy.  
Is there any flowmeter option you offer for this application?
Was this review helpful? Yes No (0/0)
ATO Responded
You can choose our ATO-MF4000, the range is 0~2L/min, please refer to the link: https://www.ato.com/small-gas-mass-flow-meter
But it measures around 0.7 L/min with an accuracy of 2.1%, is it acceptable to you?
Can it control the flow to a specified amount with this flowmeter?
5
marge
Avatar
7/19/2023 2:23 AM
Thank you for this good information.
Can I control the flow to a specified amount with this flowmeter as well?
Or is this item just to measure the flow, and I would have to regulate the flow through valving upstream of it?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Our flowmeter can only measure.
2. Yes, you also need valves to control and regulate the flow.
Please give me some recommendations
5
Hollisen
Avatar
10/17/2024 12:24 AM
I want to fill some new double pane insulated window glass units with krypton gas. Thus, I would be using your flow meter to monitor a very slow flow rate (filling through a small 1/32" capillary tube at the bottom of the window unit while the air inside will flow out a capillary tube near the top of the unit.) The windows have a gas volume of 10 liters. I would want a flow rate around 1 liter per minute. Pressures will remain very close to atmospheric pressure. I will also be looking for a regulator to lower the bottle pressure of ~1000psi to 1 psi.
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend small gas mass flow meter, SKU: ATO-FLOW-MF4000, 0~2 L/min, please note working pressure≤0.5MPa, see spec on: https://www.ato.com/small-gas-mass-flow-meter
Analog Output
5
Waldson
Avatar
9/7/2025 8:04 PM
I ordered an ATO-MF4008 flowmeter. The manual states that the maximum analog output is 5V. However, through testing, I can see higher output values. Is the maximum output value corresponding to 50 L/min truly 5V?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, under normal circumstances, the maximum output value that corresponds to 50 L/min is really 5V. Could you please tell me what the current voltage is when it exceeds 5V? Is the flowmeter being used beyond its rated capacity?
Operating at atmospheric pressure
4
Debbies
Avatar
3/16/2026 1:12 AM
We will be operating at atmospheric pressure. Is this flow meter suitable for our application?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, for normal pressure, you can directly purchase this flow meter ATO-FLOW-MF4000.
Recommended gas flow meter
5
Kvina
Avatar
7/6/2026 12:15 AM
We need a gas flow meter similar to the ATO-FLOW-MF4000, but with an operating pressure of approximately 6-10 bar, suitable for argon, and a flow range of 0-50 L/min.
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, if the operating pressure is less than or equal to 0.8 MPa, we recommend this SKU: ATO-FLOW-MF5700, see on: https://www.ato.com/digital-gas-flow-meter. If the operating pressure is less than 1 MPa, we recommend this model SKU: ATO-FLOW-MFM, see on: https://www.ato.com/micro-gas-mass-flow-meter
Only registered users can write reviews