S Type Stainless Steel Load Cell, 200kg/500kg/2 ton/3 ton to 5 ton

$153.96
High-quality S-type load cells for sale are used for tension and compression and are available in a variety of capacities from 200kg to 5 tons. Constructed of durable stainless steel with a sensitivity range of 2.0 to 3.0 ±10% mV/V and a response frequency of 1k Hz, it provides accurate measurements even in harsh conditions, making it a reliable and cost-effective choice for tension and compression measurements in industrial environments.
SKU: ATO-LC-TSH
*
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Good price S type load cell for tension and compression with high accuracy, repeatability and temperature sensitivity, with range 200kg/300kg/500kg/1 ton/2 ton/3 ton, operating voltage range 5-15V, high quality stainless steel for long term stability and extreme overload of 200%. Ideal for industrial and commercial use, this load cell is designed to withstand operating temperatures from -20°C to 80°C.

Specification

ModelATO-DYTSH
Capacity200kg/300kg/500kg/1 ton/2 ton/3 ton (optional)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Output Sensitivity2.0~3.0 ±10% mV/V
Zero Output±1%F.S.
Non-linearity0.03 %F.S.
Hysteresis0.03 %F.S.
Repeatability0.03 %F.S.
Creep0.05 %F.S. (30 min)
Temperature Sensitivity Drift0.03 %F.S./10°C
Zero Temperature Drift0.05 %F.S./10°C
Response Frequency1k Hz
MaterialStainless steel
Resistance350 Ω
Insulation Resistance≥5000 MΩ/100V DC
Operating Voltage5~15 V
Operating Temperature Range-20°C~80°C
Safety Overload150 %R.C.
Limit Overload200 %R.C.
Cable Wire Specificationφ5*6m
Ultimate Cable Pull98 N


Dimension (unit: mm)

S type load cell dimension

CapacityA (mm)B (mm)C (mm)D (mm)E (mm)
200kg-1 tonM10*1628032.530
2 tonM16*1.571904045
3 tonM18*1.58010041.550
5 tonM20*29213057.558


Force Diagram

S Type load cell force diagram

Wiring Method

S type load cell wiring method

Application

S Type load cell application

Tips: What is the working principle of S-type load cell?

The s type load cell is based on the strain gauge measurement principle. When an external force is applied, the elastomer inside the load cell undergoes a slight deformation, and the strain gauges affixed to it are then stretched or compressed, resulting in a change in resistance. This change in resistance is converted into an electrical signal through a Wheatstone bridge and processed by an amplifier circuit and data acquisition system, ultimately outputting weight data proportional to the load.

Product reviews
Load cell system
5
Searle
Avatar
8/29/2025 12:24 AM
I would like to install a load cell system with threaded studs on the dump trucks at our fruit processing facility to determine the weight of 500 kg of processed fruit. Any recommendations?
Was this review helpful? Yes No (0/0)
ATO Responded
We would also like to know if you require the load cell with threaded studs to be mounted on the bottom of the crate dump truck or elsewhere? Do you have any specific requirements regarding the size and thread type of the load cell?
Practical load cell
5
Brayden
Avatar
6/23/2026 7:28 PM
Very practical load cell. Installation and calibration are simple and straightforward. It shows minimal drift even after long hours of continuous work. Great value for workshop and testing applications.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Good price S type load cell for tension and compression with high accuracy, repeatability and temperature sensitivity, with range 200kg/300kg/500kg/1 ton/2 ton/3 ton, operating voltage range 5-15V, high quality stainless steel for long term stability and extreme overload of 200%. Ideal for industrial and commercial use, this load cell is designed to withstand operating temperatures from -20°C to 80°C.

Specification

ModelATO-DYTSH
Capacity200kg/300kg/500kg/1 ton/2 ton/3 ton (optional)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Output Sensitivity2.0~3.0 ±10% mV/V
Zero Output±1%F.S.
Non-linearity0.03 %F.S.
Hysteresis0.03 %F.S.
Repeatability0.03 %F.S.
Creep0.05 %F.S. (30 min)
Temperature Sensitivity Drift0.03 %F.S./10°C
Zero Temperature Drift0.05 %F.S./10°C
Response Frequency1k Hz
MaterialStainless steel
Resistance350 Ω
Insulation Resistance≥5000 MΩ/100V DC
Operating Voltage5~15 V
Operating Temperature Range-20°C~80°C
Safety Overload150 %R.C.
Limit Overload200 %R.C.
Cable Wire Specificationφ5*6m
Ultimate Cable Pull98 N


Dimension (unit: mm)

S type load cell dimension

CapacityA (mm)B (mm)C (mm)D (mm)E (mm)
200kg-1 tonM10*1628032.530
2 tonM16*1.571904045
3 tonM18*1.58010041.550
5 tonM20*29213057.558


Force Diagram

S Type load cell force diagram

Wiring Method

S type load cell wiring method

Application

S Type load cell application

Tips: What is the working principle of S-type load cell?

The s type load cell is based on the strain gauge measurement principle. When an external force is applied, the elastomer inside the load cell undergoes a slight deformation, and the strain gauges affixed to it are then stretched or compressed, resulting in a change in resistance. This change in resistance is converted into an electrical signal through a Wheatstone bridge and processed by an amplifier circuit and data acquisition system, ultimately outputting weight data proportional to the load.

Product reviews
Load cell system
5
Searle
Avatar
8/29/2025 12:24 AM
I would like to install a load cell system with threaded studs on the dump trucks at our fruit processing facility to determine the weight of 500 kg of processed fruit. Any recommendations?
Was this review helpful? Yes No (0/0)
ATO Responded
We would also like to know if you require the load cell with threaded studs to be mounted on the bottom of the crate dump truck or elsewhere? Do you have any specific requirements regarding the size and thread type of the load cell?
Practical load cell
5
Brayden
Avatar
6/23/2026 7:28 PM
Very practical load cell. Installation and calibration are simple and straightforward. It shows minimal drift even after long hours of continuous work. Great value for workshop and testing applications.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews