1-Passage Rotary Joint, Electrical/Pneumatic Slip Ring, M5 Thread Port

$139.85
1-passage rotary joint is an electrical and pneumatic slip ring, transfer fluid mediums including hydraulic, cooling water, compressed air, steam, vacuum and other gas/liquid. It also can transmit 5A current and signal, circuits can select 6 wires/12 wires/24 wires. M5 thread port for 4mm pipes. Other combinations of circuits and transmission current are customizable.
SKU: ATO-RTJT-3001
*
Free Shipping
Delivery date: 10-20 days

The series of 1-passage pneumatic rotary joint can rotate 360° and transmit medium. It can not only transfer fluid but also can combine to transmit electrical power and signal. Slip ring has the advantages of small size, light weight and low torque. In addition to standard models, other specifications can be customized.

Features

  • Single-passage 1 in 1out pneumatic rotary joint slip ring, 35mm outer diameter, M5 thread, supports 4mm pipe.
  • Can mix power lines, signal lines, Ethernet, industrial bus, control lines, solenoid valves, induction lines, etc.
  • Standard installation is flange, customizable hollow shaft installing.
  • The medium that can pass including compressed air, hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverage, and the like.

Specification

ModelATO-3001004
Number of Passages1 Passage (Gas/Flow)
Thread PortM5
Pipe Size4mm
Max. Pressure10Mpa, Vacuum -1.5kPa
Torque<0.2N.m
Voltage RangePower: 0~440VAC/VDC
Signal: 0~440VAC/VDC
Insulation ResistancePower: <500MΩ/300VDC
Signal: <500MΩ/300VDC
Lead Wire Spec.Power:AWG17# Silverplated teflon wire
Signal: AWG22# Silverplated teflon wire
Lead Wire Lengthstandard 200mm (can be customized)
Insulation Resistance500VAC@50Hz, 6s
Electrical Noise<0.01Ω
IP GradeIP51
Working Life10millions for ref (depends on working conditions)
Max. Speed250rpm continously, 1000rpm intermittently
CertificationCE, RoHS
Working Temp.-30℃~80℃
Work Humidity0~85% RH
Contact Materialprecious metal
Housing Materialaluminum alloy
WeightAbout 1 kg

Note: Please contact us if you need the flange

1-Passage Pneumatic/Electrical Rotary Joint Dimension Diagram (Unit: mm)

1-Passage Pneumatic Electrical Rotary Joint Dimension Diagram

Standard Model List

ModelPassageCircuitsLength L (mm)
Power (10A)Signal (0-5A)
ATO-3001004-06S10636
ATO-3001004-08S10836
ATO-3001004-061016036
ATO-3001004-12S101236

1-Passage Pneumatic/Electrical Rotary Joint Installation Diagram

1-Passage Pneumatic Electrical Rotary Joint Installation Diagram

1-Passage Pneumatic Electrical Rotary Joint Installation Diagram

Color Code of Lead Wire

ring #123456789101112
colorBLKBRNREDORGYELGRNBLUPURGRYWHTPINKLGT BLU

Tips: What is a rotary joint?

A rotary joint is also called rotary union. It is a closed rotary connector for 360° rotating conveying medium. A 1-passage rotary joint has 1 intake and 1 exhaust. The rotary joint input fluid medium from a stationary pipe into a rotating or reciprocating device and then discharge the medium from the rotary joint. The application fields cover almost every processing and manufacturing industry. For example, metallurgy, machine tool, power generation, oil, rubber plastic, textile, printing and dyeing, pharmaceutical, cigarette, papermaking, food, feed processing, etc.

Slip Ring Connectors for Rotating Electrical Connection

Slip rings are often found in various devices, such as rotating robotic arms, multi-axis stabilizers, rotating neon lights on the roadside, etc. If you use slip rings, you don't have to worry about twisting the circuits together.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
High Efficiency
5
Kelvin
Avatar
4/19/2020 7:37 PM
The rotary joint has compact structure and light weight, transmission speed is speed. Good quality and efficiency with affordable price.
Was this review helpful? Yes No (0/0)
Slip ring runs well
5
Finn
Avatar
4/28/2022 9:38 PM
It feels like the slip ring is well made, frictionless and comes with thick, high quality wire. Used to connect underwater camera with cable reel to monitor, the reel turns the monitor without rotating the ring very well, which is a good choice.
Was this review helpful? Yes No (0/0)
Do you have suitable slip ring?
5
abner
Avatar
3/2/2023 1:57 AM
Do you have any model of your slip ring that fit the size of the attached drawing (all numbers in mm)? The slip ring needs to fit 1 fiber optic and 24 coaxial cables.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, our slip rings cannot fit 1 fiber optic and 24 coaxial cables. These two signal lines can only be used separately.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The series of 1-passage pneumatic rotary joint can rotate 360° and transmit medium. It can not only transfer fluid but also can combine to transmit electrical power and signal. Slip ring has the advantages of small size, light weight and low torque. In addition to standard models, other specifications can be customized.

Features

  • Single-passage 1 in 1out pneumatic rotary joint slip ring, 35mm outer diameter, M5 thread, supports 4mm pipe.
  • Can mix power lines, signal lines, Ethernet, industrial bus, control lines, solenoid valves, induction lines, etc.
  • Standard installation is flange, customizable hollow shaft installing.
  • The medium that can pass including compressed air, hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverage, and the like.

Specification

ModelATO-3001004
Number of Passages1 Passage (Gas/Flow)
Thread PortM5
Pipe Size4mm
Max. Pressure10Mpa, Vacuum -1.5kPa
Torque<0.2N.m
Voltage RangePower: 0~440VAC/VDC
Signal: 0~440VAC/VDC
Insulation ResistancePower: <500MΩ/300VDC
Signal: <500MΩ/300VDC
Lead Wire Spec.Power:AWG17# Silverplated teflon wire
Signal: AWG22# Silverplated teflon wire
Lead Wire Lengthstandard 200mm (can be customized)
Insulation Resistance500VAC@50Hz, 6s
Electrical Noise<0.01Ω
IP GradeIP51
Working Life10millions for ref (depends on working conditions)
Max. Speed250rpm continously, 1000rpm intermittently
CertificationCE, RoHS
Working Temp.-30℃~80℃
Work Humidity0~85% RH
Contact Materialprecious metal
Housing Materialaluminum alloy
WeightAbout 1 kg

Note: Please contact us if you need the flange

1-Passage Pneumatic/Electrical Rotary Joint Dimension Diagram (Unit: mm)

1-Passage Pneumatic Electrical Rotary Joint Dimension Diagram

Standard Model List

ModelPassageCircuitsLength L (mm)
Power (10A)Signal (0-5A)
ATO-3001004-06S10636
ATO-3001004-08S10836
ATO-3001004-061016036
ATO-3001004-12S101236

1-Passage Pneumatic/Electrical Rotary Joint Installation Diagram

1-Passage Pneumatic Electrical Rotary Joint Installation Diagram

1-Passage Pneumatic Electrical Rotary Joint Installation Diagram

Color Code of Lead Wire

ring #123456789101112
colorBLKBRNREDORGYELGRNBLUPURGRYWHTPINKLGT BLU

Tips: What is a rotary joint?

A rotary joint is also called rotary union. It is a closed rotary connector for 360° rotating conveying medium. A 1-passage rotary joint has 1 intake and 1 exhaust. The rotary joint input fluid medium from a stationary pipe into a rotating or reciprocating device and then discharge the medium from the rotary joint. The application fields cover almost every processing and manufacturing industry. For example, metallurgy, machine tool, power generation, oil, rubber plastic, textile, printing and dyeing, pharmaceutical, cigarette, papermaking, food, feed processing, etc.

Product reviews
High Efficiency
5
Kelvin
Avatar
4/19/2020 7:37 PM
The rotary joint has compact structure and light weight, transmission speed is speed. Good quality and efficiency with affordable price.
Was this review helpful? Yes No (0/0)
Slip ring runs well
5
Finn
Avatar
4/28/2022 9:38 PM
It feels like the slip ring is well made, frictionless and comes with thick, high quality wire. Used to connect underwater camera with cable reel to monitor, the reel turns the monitor without rotating the ring very well, which is a good choice.
Was this review helpful? Yes No (0/0)
Do you have suitable slip ring?
5
abner
Avatar
3/2/2023 1:57 AM
Do you have any model of your slip ring that fit the size of the attached drawing (all numbers in mm)? The slip ring needs to fit 1 fiber optic and 24 coaxial cables.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, our slip rings cannot fit 1 fiber optic and 24 coaxial cables. These two signal lines can only be used separately.
Only registered users can write reviews