4-Passage Rotary Joint, Pneumatic/Electrical Slip Ring, G1/8" Thread Port

$313.69
4-passage rotary joint, pneumatic/electrical slip ring can be used in compressed air, steam, vacuum, negative pressure, positive pressure, cooling water, hot oil and other fluid medium. Transmission circuits 12/24/36/56 wires 2A electrical signal or 12/24 circuits 5A electrical signal for selection. Thread port is G1/8" for 6~8mm pipes. Other combinations of circuits and transmission current can be customized.
SKU: ATO-RTJT-3004
*
Free Shipping
Delivery date: 6-12 days

The 4-passage rotary joint also well known as rotary union slip ring. 4 passages with 4 inlet and 4 outlet to make flow of the same or different fluid medium into or out of the rotating equipment. In addition to the standard model, the combination of gas, electricity, liquid and the number of passages are customizable.

Specification

ModelATO-3004006
Number of Passages4-Passage (Gas/Flow)
Thread PortG1/8"
Pipe size6~8mm Pipe (G1/8")
Max. Pressure1Mpa, Vacuum -1.5kPa
torque<0.4N.m
Working Life20 millions for ref (depends on working conditions)
Max. Speed250rpm continously, 1000RPM intermittently
Working Temp.-30℃~80℃
Work Humidity0~85% RH
Contact Materialprecious metal
Housing Materialaluminum alloy
Voltage RangePower: 0~440VAC/VDC
Signal: 0~440VAC/VDC
Insulation ResistancePower: <500MΩ/300VDC
Signal: <500MΩ/300VDC
Lead Wire Spec.Power:AWG17# Silverplated teflon wire
Signal: AWG22# Silverplated teflon wire
Lead Wire Lengthstandard 250mm (can be customized)
CertificationCE, RoHS
Insulation Resistance500VAC@50Hz,6s
Electrical Noise<0.01Ω
IP GradeIP51
WeightAbout 1 kg

Note: Please contact us if you need the flange. The package includes the controller.

Dimension Drawing of 4-Passage Rotary Joint (gas/flow transfer only)

4-Passage Pneumatic Rotary Joint Dimension Drawing

 Standard Model List

ModelPassages (Gas/Flow)Port SizePipe Size
ATO-30040064G1/8"6~8mm

Dimension Drawing of 4-Passage Rotary Union (gas/flow+6~56-Wire 2A signal transfer)

4-Passage Pneumatic Rotary Joint, 6~56-Wire 2A Signal Dimension Drawing

Standard Model List

ModelPassages (Gas/Flow)Port SizePipe SizeSignal Circuits (2A)Length L (mm)
ATO-3004006-064G1/8"6~8mm614
ATO-3004006-124G1/8"6~8mm1221
ATO-3004006-24S4G1/8"6~8mm2435
ATO-3004006-36S4G1/8"6~8mm3652.3
ATO-3004006-56S4G1/8"6~8mm5682

Dimension Drawing of 4-Passage Rotary Union (gas/flow+6~36-Wire 5A signal/10A power transfer)

4-Passage Pneumatic Rotary Joint, 5A/10A Signal Dimension Drawing

Standard Model List

ModelPassagesPort SizePipe SizeCircuitsLength L (mm)
Power (10A)Signal (5A)
ATO-3004006-06054G1/8"6~8mm0638
ATO-3004006-06104G1/8"6~8mm6038
ATO-3004006-12054G1/8"6~8mm01255
ATO-3004006-0610-06054G1/8"6~8mm6655
ATO-3004006-12104G1/8"6~8mm12055
ATO-3004006-0610-12054G1/8"6~8mm61271.5
ATO-3004006-1210-06054G1/8"6~8mm12671.5
ATO-3004006-18054G1/8"6~8mm01871.5
ATO-3004006-18104G1/8"6~8mm18071.5
ATO-3004006-0610-18054G1/8"6~8mm61888.5
ATO-3004006-24054G1/8"6~8mm02488.5
ATO-3004006-30054G1/8"6~8mm030106
ATO-3004006-36054G1/8"6~8mm036125

Rotary Joint Installation Diagram

Rotary Joint Installation Diagram

Tips: Rotary joint slip ring working principle.

Rotary joints typically include a fixture, also referred to as a housing. The housing has an inlet for receiving the fluid medium. The non-rotating seal is mounted in the joint housing. The rotor (ie, the rotating piece) includes a rotary seal and an outlet for delivering fluid to the rotating assembly. In a rotary joint, the sealing surface of the non- rotating seal is typically biased by a spring, medium pressure or other means, then form a sealed connection with the fluid on the sealing surface of the rotating seal. The seal allows the fluid medium to be transported through the rotary joint without significant leakage between the non-rotating portion and the rotating portion.

Slip Ring Connectors for Rotating Electrical Connection

Slip rings are often found in various devices, such as rotating robotic arms, multi-axis stabilizers, rotating neon lights on the roadside, etc. If you use slip rings, you don't have to worry about twisting the circuits together.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Working temperature
5
Jones
Avatar
4/6/2022 7:38 PM
Can the pneumatic rotary joint withstand 70°C? I'm building housing to insulate the unit, wondering if I need to replace the joints on the hot side. Is it waterproof?
Was this review helpful? Yes No (0/0)
ATO Responded
Its working temp is -30℃~80℃ and it is designed for Hydraulic/Air/Water.
Can you provide a budgetary estimate of slip ring?
5
matteus
Avatar
8/30/2023 3:33 AM
I'm looking for a slip ring/rotary union similar to this product customized to have additional lines in it.
The unit would need a total of:
Power - 6 lines (10A)
Data - 36 lines (2A)
RS232 and ethernet communication
4 Pneumatic lines
If this product can be configured for this, can you provide a budgetary estimate?
If you need additional information, please let me know.
Was this review helpful? Yes No (0/0)
ATO Responded
We can provide customization, but we also need to confirm the following information:
1. Is the quantity of RS232 and ethernet communication one set each?
2. The RS232 communication cable is two-core +1 shielded, so is the Ethernet communication a Gigabit or a 100M cable?
Please tell us what are the specific specifications of the communication cable.
Do you have any other ring connection types/sizes?
5
nancy
Avatar
9/17/2023 11:51 PM
The ID of my tubing is 3/16". Do you have any other connection types/sizes?
Was this review helpful? Yes No (0/0)
ATO Responded
In model number ATO-RTJT-3004, stainless steel material can be customized. But we also need to confirm the following specifications:
1. You need to indicate the required Number of Signal Wires.
2. Connection types/sizes are available: G1/8, G1/4, G3/8".
Which connection size do you want to choose?
And what is the pressure of the oil pipe?
2- Passage -Rotary Air Electric Rotary Joint G-3/8 inch
5
shailesh
Avatar
4/2/2024 7:14 AM
Dear Team,
We have requirement for rotary joint 2- Passage -Rotary Air  Electric Rotary Joint G-3/8 inch,
24 Wire- 2A connection or 24 Wire- 5A connection
Air connection G-3/8, G-1/4-Front face.

There is no catalogue available on ATO site as well as net for G3/8
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we only have the rotary joint with G1/8" port size (ATO-3002006-24S, ATO-3002006-2405), 2-passage rotary Air & 24-wire 2A connection or 24-wire 5A connection. See https://www.ato.com/2-passage-rotary-joint.
Load that can be carried
5
Cyrillic
Avatar
3/19/2025 8:20 PM
I would like to know what is the load that 4-passage rotary joint & slip ring can carry.
Was this review helpful? Yes No (0/0)
ATO Responded
The rotary joint and housing of the 4-passage slip ring cannot bear weight, so it is not recommended to put load on it.
Wire specification
4
Harrio
Avatar
5/10/2026 9:13 PM
What wire specifications are used? Or can I specify the specifications?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, these slip rings use 22AWG cable.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The 4-passage rotary joint also well known as rotary union slip ring. 4 passages with 4 inlet and 4 outlet to make flow of the same or different fluid medium into or out of the rotating equipment. In addition to the standard model, the combination of gas, electricity, liquid and the number of passages are customizable.

Specification

ModelATO-3004006
Number of Passages4-Passage (Gas/Flow)
Thread PortG1/8"
Pipe size6~8mm Pipe (G1/8")
Max. Pressure1Mpa, Vacuum -1.5kPa
torque<0.4N.m
Working Life20 millions for ref (depends on working conditions)
Max. Speed250rpm continously, 1000RPM intermittently
Working Temp.-30℃~80℃
Work Humidity0~85% RH
Contact Materialprecious metal
Housing Materialaluminum alloy
Voltage RangePower: 0~440VAC/VDC
Signal: 0~440VAC/VDC
Insulation ResistancePower: <500MΩ/300VDC
Signal: <500MΩ/300VDC
Lead Wire Spec.Power:AWG17# Silverplated teflon wire
Signal: AWG22# Silverplated teflon wire
Lead Wire Lengthstandard 250mm (can be customized)
CertificationCE, RoHS
Insulation Resistance500VAC@50Hz,6s
Electrical Noise<0.01Ω
IP GradeIP51
WeightAbout 1 kg

Note: Please contact us if you need the flange. The package includes the controller.

Dimension Drawing of 4-Passage Rotary Joint (gas/flow transfer only)

4-Passage Pneumatic Rotary Joint Dimension Drawing

 Standard Model List

ModelPassages (Gas/Flow)Port SizePipe Size
ATO-30040064G1/8"6~8mm

Dimension Drawing of 4-Passage Rotary Union (gas/flow+6~56-Wire 2A signal transfer)

4-Passage Pneumatic Rotary Joint, 6~56-Wire 2A Signal Dimension Drawing

Standard Model List

ModelPassages (Gas/Flow)Port SizePipe SizeSignal Circuits (2A)Length L (mm)
ATO-3004006-064G1/8"6~8mm614
ATO-3004006-124G1/8"6~8mm1221
ATO-3004006-24S4G1/8"6~8mm2435
ATO-3004006-36S4G1/8"6~8mm3652.3
ATO-3004006-56S4G1/8"6~8mm5682

Dimension Drawing of 4-Passage Rotary Union (gas/flow+6~36-Wire 5A signal/10A power transfer)

4-Passage Pneumatic Rotary Joint, 5A/10A Signal Dimension Drawing

Standard Model List

ModelPassagesPort SizePipe SizeCircuitsLength L (mm)
Power (10A)Signal (5A)
ATO-3004006-06054G1/8"6~8mm0638
ATO-3004006-06104G1/8"6~8mm6038
ATO-3004006-12054G1/8"6~8mm01255
ATO-3004006-0610-06054G1/8"6~8mm6655
ATO-3004006-12104G1/8"6~8mm12055
ATO-3004006-0610-12054G1/8"6~8mm61271.5
ATO-3004006-1210-06054G1/8"6~8mm12671.5
ATO-3004006-18054G1/8"6~8mm01871.5
ATO-3004006-18104G1/8"6~8mm18071.5
ATO-3004006-0610-18054G1/8"6~8mm61888.5
ATO-3004006-24054G1/8"6~8mm02488.5
ATO-3004006-30054G1/8"6~8mm030106
ATO-3004006-36054G1/8"6~8mm036125

Rotary Joint Installation Diagram

Rotary Joint Installation Diagram

Tips: Rotary joint slip ring working principle.

Rotary joints typically include a fixture, also referred to as a housing. The housing has an inlet for receiving the fluid medium. The non-rotating seal is mounted in the joint housing. The rotor (ie, the rotating piece) includes a rotary seal and an outlet for delivering fluid to the rotating assembly. In a rotary joint, the sealing surface of the non- rotating seal is typically biased by a spring, medium pressure or other means, then form a sealed connection with the fluid on the sealing surface of the rotating seal. The seal allows the fluid medium to be transported through the rotary joint without significant leakage between the non-rotating portion and the rotating portion.

Product reviews
Working temperature
5
Jones
Avatar
4/6/2022 7:38 PM
Can the pneumatic rotary joint withstand 70°C? I'm building housing to insulate the unit, wondering if I need to replace the joints on the hot side. Is it waterproof?
Was this review helpful? Yes No (0/0)
ATO Responded
Its working temp is -30℃~80℃ and it is designed for Hydraulic/Air/Water.
Can you provide a budgetary estimate of slip ring?
5
matteus
Avatar
8/30/2023 3:33 AM
I'm looking for a slip ring/rotary union similar to this product customized to have additional lines in it.
The unit would need a total of:
Power - 6 lines (10A)
Data - 36 lines (2A)
RS232 and ethernet communication
4 Pneumatic lines
If this product can be configured for this, can you provide a budgetary estimate?
If you need additional information, please let me know.
Was this review helpful? Yes No (0/0)
ATO Responded
We can provide customization, but we also need to confirm the following information:
1. Is the quantity of RS232 and ethernet communication one set each?
2. The RS232 communication cable is two-core +1 shielded, so is the Ethernet communication a Gigabit or a 100M cable?
Please tell us what are the specific specifications of the communication cable.
Do you have any other ring connection types/sizes?
5
nancy
Avatar
9/17/2023 11:51 PM
The ID of my tubing is 3/16". Do you have any other connection types/sizes?
Was this review helpful? Yes No (0/0)
ATO Responded
In model number ATO-RTJT-3004, stainless steel material can be customized. But we also need to confirm the following specifications:
1. You need to indicate the required Number of Signal Wires.
2. Connection types/sizes are available: G1/8, G1/4, G3/8".
Which connection size do you want to choose?
And what is the pressure of the oil pipe?
2- Passage -Rotary Air Electric Rotary Joint G-3/8 inch
5
shailesh
Avatar
4/2/2024 7:14 AM
Dear Team,
We have requirement for rotary joint 2- Passage -Rotary Air  Electric Rotary Joint G-3/8 inch,
24 Wire- 2A connection or 24 Wire- 5A connection
Air connection G-3/8, G-1/4-Front face.

There is no catalogue available on ATO site as well as net for G3/8
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we only have the rotary joint with G1/8" port size (ATO-3002006-24S, ATO-3002006-2405), 2-passage rotary Air & 24-wire 2A connection or 24-wire 5A connection. See https://www.ato.com/2-passage-rotary-joint.
Load that can be carried
5
Cyrillic
Avatar
3/19/2025 8:20 PM
I would like to know what is the load that 4-passage rotary joint & slip ring can carry.
Was this review helpful? Yes No (0/0)
ATO Responded
The rotary joint and housing of the 4-passage slip ring cannot bear weight, so it is not recommended to put load on it.
Wire specification
4
Harrio
Avatar
5/10/2026 9:13 PM
What wire specifications are used? Or can I specify the specifications?
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, these slip rings use 22AWG cable.
Only registered users can write reviews
Customers who bought this item also bought

Hole Diameter 100mm Through Bore Slip Ring, Outer Diameter 185mm

ATO-THSR-100185
$696.92
Through bore slip ring price is affordable, hole diameter is 100mm, outer diameter is 185mm. For standard models, it can transmit 6/12/18/24 circuits of 10A current in 360° rotation, 2A signal or other currents are customizable. Through bore slip rings have compact structure and size, making installation and use of slip rings more easy and convenient.