Water Pressure Switch, 0.1 to 20 Bar

$86.51
Good price water pressure switch with 0.1-20 bar pressure range can be chosen, NO/ NC two contact forms, ±0.2 bar/ ±0.3 bar/ ±0.05 bar/ ±1 bar precision. The pressure switch has the advantages of flexible installation, convenient use, strong independence and long service life.
SKU: ATO-WPS-LF727
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Note: This pressure switch cannot be used for drinking water.

High-performance pressure switch with cheap price, the mechanical pressure switch features 250VAC/ 24VDC max voltage, max current 4A, and 300 bar burst pressure.

Specification

ModelATO-PS-LF727
Pressure range0.3-1.5 bar (Diaphragm Type), 1-6 bar (Diaphragm Type), 5-20 bar (Diaphragm Type), 15-50 bar (Diaphragm Type), 30-100 bar (Plunger Type), 50-150 bar (Plunger Type), 100-200 bar (Plunger Type)
Precision±0.2 bar/ ±0.3 bar/ ±0.05 bar/ ±1 bar
Contact formNO/ NC
Connection thread1/8 NPT, 1/4 NPT, G1/8, G1/4, 1/4 copper tube
Diaphragm typeNBR/ FKM/ EPDM/ HNBR
Body materialZinc-plated steel/ stainless steel
Contact materialSilver cadmium alloy (can be gold plated)
Max voltage250VAC/ 24VDC
Max current4A
Working temperature range-40℃~+100℃ (baesd on different diaphragm)
Life endurance10⁶
Eletrical life endurance10⁵
Pollution situationNormal
IP levelIP65
Max working pressure150 bar
Burst pressure300 bar
CertificateCE, RoHS, REACH
Warranty12 months

Dimensions (mm)

Dimension of pressure switch

Tips: How to Set Up the Pressure Switch?

  1. Short press the (ON/OFF) run key to turn off the run indicator, and the pressure control system is closed.
  2. Short press the SET button once to enter the lower limit setting state (corresponding to the lower limit indicator light), set the value through (▲) (▼), after setting the lower limit, short press the SET button to enter the upper limit setting, the setting method is the same as above.
  3. Set the upper/lower limit of control: After the setting is completed, press the SET button to automatically save the set value into the computer chip (after the parameter is modified, no key operation within 5 seconds will automatically save the current parameter setting).
  4. Press the (ON/ OFF) run key again (the corresponding run indicator light is on), and the motor starts to work.
Product reviews
Maximum operating temperature
5
Irinas
Avatar
5/28/2025 9:13 PM
What is the maximum continuous operating temperature this pressure switch can withstand? I am looking at the stainless-steel version. Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
Its operating temperature range is -40℃ to 100℃, so the maximum continuous operating temperature is 100℃.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This pressure switch cannot be used for drinking water.

High-performance pressure switch with cheap price, the mechanical pressure switch features 250VAC/ 24VDC max voltage, max current 4A, and 300 bar burst pressure.

Specification

ModelATO-PS-LF727
Pressure range0.3-1.5 bar (Diaphragm Type), 1-6 bar (Diaphragm Type), 5-20 bar (Diaphragm Type), 15-50 bar (Diaphragm Type), 30-100 bar (Plunger Type), 50-150 bar (Plunger Type), 100-200 bar (Plunger Type)
Precision±0.2 bar/ ±0.3 bar/ ±0.05 bar/ ±1 bar
Contact formNO/ NC
Connection thread1/8 NPT, 1/4 NPT, G1/8, G1/4, 1/4 copper tube
Diaphragm typeNBR/ FKM/ EPDM/ HNBR
Body materialZinc-plated steel/ stainless steel
Contact materialSilver cadmium alloy (can be gold plated)
Max voltage250VAC/ 24VDC
Max current4A
Working temperature range-40℃~+100℃ (baesd on different diaphragm)
Life endurance10⁶
Eletrical life endurance10⁵
Pollution situationNormal
IP levelIP65
Max working pressure150 bar
Burst pressure300 bar
CertificateCE, RoHS, REACH
Warranty12 months

Dimensions (mm)

Dimension of pressure switch

Tips: How to Set Up the Pressure Switch?

  1. Short press the (ON/OFF) run key to turn off the run indicator, and the pressure control system is closed.
  2. Short press the SET button once to enter the lower limit setting state (corresponding to the lower limit indicator light), set the value through (▲) (▼), after setting the lower limit, short press the SET button to enter the upper limit setting, the setting method is the same as above.
  3. Set the upper/lower limit of control: After the setting is completed, press the SET button to automatically save the set value into the computer chip (after the parameter is modified, no key operation within 5 seconds will automatically save the current parameter setting).
  4. Press the (ON/ OFF) run key again (the corresponding run indicator light is on), and the motor starts to work.
Product reviews
Maximum operating temperature
5
Irinas
Avatar
5/28/2025 9:13 PM
What is the maximum continuous operating temperature this pressure switch can withstand? I am looking at the stainless-steel version. Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
Its operating temperature range is -40℃ to 100℃, so the maximum continuous operating temperature is 100℃.
Only registered users can write reviews