Pneumatic Clutch, Shaft Mounted, 50Nm-400Nm

$342.78
Buy a pneumatic clutch for industrial applications, using a shaft mounted installation method, with static friction torque options of 50Nm, 100Nm, 200Nm, and 400Nm at 0.6MPa. The torque can be adjusted widely by adjusting the air pressure.
SKU: ATO-PCB-NAC
*
Free Shipping
Delivery date: 6-12 days

The pneumatic clutch provides static friction torque of 50Nm to 400Nm at 0.6MPa and is widely used across various industries, including printing, packaging, textiles, rubber, and food machinery. It is suitable for a range of industrial equipment, such as stranding machines, automation machines, coating machines, and paper-making machinery.

Features

  • The torque adjustment range is extensive, allowing for broad adjustments through air pressure regulation.
  • Pneumatic clutch is safe and reliable, with no electrical sparks generated during operation.
  • Suitable for high-frequency and continuous slip conditions, it demonstrates excellent durability even under heavy loads and can function as a torque limiter.
  • By adjusting air pressure, pneumatic clutch achieves smooth pneumatic operation, minimizing impact on the system.
  • With good heat dissipation, the friction pads experience minimal wear, resulting in a long service life and easy maintenance.
  • Its compact design allows for the pulley to be integrated with the clutch, facilitating user convenience.

Specification

ModelATO-NAC-5ATO-NAC-10ATO-NAC-20ATO-NAC-40
Static friction torque (kgm/(Nm))At 0.6Mpa5 (50)10 (100)20 (200)40 (400)
Volume of air chamber (cm3)Minimum Vn5.35910.5615.3820.42
Minimum Vo14.0132.7859.5286.01
Permissible wear of friction plate Vf (cm3)25.5858.85103.62148.2
Rotation speed limit Nc (r/min)1800180017001700
Moment of inertia J (kg·m2)J14.14×10-31.637×10-24.21×10-24.21×10-2
J24.61×10-31.851x10-25.28×10-25.28x10-2
Weight (approximately)5kg12kg18kg22kg

Vn: Air chamber volume with new friction pads
Vo: Air chamber volume before the friction pads are replaced
J1: Inertia value of the part rotating with the V-type pulley
J2: Inertia value of the part rotating with the shaft

Dimension (mm)

Pneumatic clutch dimension

ModelATO-NAC-5ATO-NAC-10ATO-NAC-20ATO-NAC-40
A (H7)25354050
B153205244258
C142185196226
D110140150164
E (h7)76105110125
F47677082
G98136160175
H32384651
J18223240
K7172024
L6998
M2430.52538
NM6x0.75M10x1.25M10x1.25M10x1.25
RM6M8M10M10
RR11141616
S95125130145
T6101212
U27.838.34453.3
Key6x6x3010x8x4012x8x6012x8x60

Note: The shaft hole size can be customized according to customer needs, but cannot be larger than the value in the table.

Install Instance

Pneumatic clutch installation

Structure

Pneumatic clutch details

Tips: Working principle of pneumatic clutch

The working principle of the pneumatic clutch is as follows: when air is supplied, the piston pushes the disc to compress the friction pads, engaging the clutch. When the air supply is cut off, the reset spring causes the disc to separate from the friction pads, disengaging the clutch. Additionally, the friction pads are designed in a half-open configuration, making them easy to replace.

Product reviews
3D model
5
Bodnar
Avatar
4/9/2025 12:30 AM
I am designing an application and I need a 3D model of this shaft mounted pneumatic clutch.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, this pneumatic clutch is not available in 3D CAD at the moment. You can only refer to the dimensional drawing on the website.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The pneumatic clutch provides static friction torque of 50Nm to 400Nm at 0.6MPa and is widely used across various industries, including printing, packaging, textiles, rubber, and food machinery. It is suitable for a range of industrial equipment, such as stranding machines, automation machines, coating machines, and paper-making machinery.

Features

  • The torque adjustment range is extensive, allowing for broad adjustments through air pressure regulation.
  • Pneumatic clutch is safe and reliable, with no electrical sparks generated during operation.
  • Suitable for high-frequency and continuous slip conditions, it demonstrates excellent durability even under heavy loads and can function as a torque limiter.
  • By adjusting air pressure, pneumatic clutch achieves smooth pneumatic operation, minimizing impact on the system.
  • With good heat dissipation, the friction pads experience minimal wear, resulting in a long service life and easy maintenance.
  • Its compact design allows for the pulley to be integrated with the clutch, facilitating user convenience.

Specification

ModelATO-NAC-5ATO-NAC-10ATO-NAC-20ATO-NAC-40
Static friction torque (kgm/(Nm))At 0.6Mpa5 (50)10 (100)20 (200)40 (400)
Volume of air chamber (cm3)Minimum Vn5.35910.5615.3820.42
Minimum Vo14.0132.7859.5286.01
Permissible wear of friction plate Vf (cm3)25.5858.85103.62148.2
Rotation speed limit Nc (r/min)1800180017001700
Moment of inertia J (kg·m2)J14.14×10-31.637×10-24.21×10-24.21×10-2
J24.61×10-31.851x10-25.28×10-25.28x10-2
Weight (approximately)5kg12kg18kg22kg

Vn: Air chamber volume with new friction pads
Vo: Air chamber volume before the friction pads are replaced
J1: Inertia value of the part rotating with the V-type pulley
J2: Inertia value of the part rotating with the shaft

Dimension (mm)

Pneumatic clutch dimension

ModelATO-NAC-5ATO-NAC-10ATO-NAC-20ATO-NAC-40
A (H7)25354050
B153205244258
C142185196226
D110140150164
E (h7)76105110125
F47677082
G98136160175
H32384651
J18223240
K7172024
L6998
M2430.52538
NM6x0.75M10x1.25M10x1.25M10x1.25
RM6M8M10M10
RR11141616
S95125130145
T6101212
U27.838.34453.3
Key6x6x3010x8x4012x8x6012x8x60

Note: The shaft hole size can be customized according to customer needs, but cannot be larger than the value in the table.

Install Instance

Pneumatic clutch installation

Structure

Pneumatic clutch details

Tips: Working principle of pneumatic clutch

The working principle of the pneumatic clutch is as follows: when air is supplied, the piston pushes the disc to compress the friction pads, engaging the clutch. When the air supply is cut off, the reset spring causes the disc to separate from the friction pads, disengaging the clutch. Additionally, the friction pads are designed in a half-open configuration, making them easy to replace.

Product reviews
3D model
5
Bodnar
Avatar
4/9/2025 12:30 AM
I am designing an application and I need a 3D model of this shaft mounted pneumatic clutch.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, this pneumatic clutch is not available in 3D CAD at the moment. You can only refer to the dimensional drawing on the website.
Only registered users can write reviews