Photoelectric Label Sensor, NPN/PNP, Slot Type

$189.76
Factory price photoelectric label sensor for sale online, the sensor adopts 3mm slot width and 60mm slot depth design, supports NPN/PNP output optional. Users can choose 2m 3-core cable or 25cm cable + M8 connector connection method according to their needs, which is flexible to install. The label sensor uses infrared light (940nm) as the light source and has high-precision label detection capabilities.
SKU: ATO-LABEL-TR03
*
*
Free Shipping
Delivery date: 6-12 days

The photoelectric label sensor supports 12-24VDC wide range power input, has an operating temperature range of -20~60℃ and IP65 protection level, and is widely used in automated packaging and printing equipment such as label positioning and transparent label detection.

Specification

ModelNPNATO-LAP-TR03TNBATO-LAP-TR03TNB-F3
PNPATO-LAP-TR03TPBATO-LAP-TR03TPB-F3
Connection2m 3 pins cable25cm cable + M8 connector
Slot width3mm
Slot depth60mm
Label minimum spacing≥2mm
Light sourceInfrared light (940nm)
Response frequencyMax 10kHz
Label passing speed≤20m/min (0.3m/s)
Response time≤50μs
Delay after startup≤300ms
Supply voltage high/low12-24VDC (Ripple≤15%)
Current consumption≤30mA
Warning outputRed indicator light on
Switch output functionLight on/ dark on (Switchable)
Voltage drop≤2V
Output current≤10mA
IndicatorRed light: Calibration error/operation error; Green light: NO NC; Blue light: detect label switch output signal
Operation temperature-20-60℃ (No icing, no condensation)
Storage te mperature-30-70℃
Protection degreeIP65
VDE safety levelⅢ
WeightApproximately 55g (100g with wire)
MaterialZinc die casting; surface electroless nickel plating (Silver); PC plastic


Dimension (Unit: mm)

Photoelectric label sensor dimension

Wiring diagram

Photoelectric label sensor wiring diagram

Tips: Precautions for using photoelectric label sensor

  • Make sure the power supply voltage is within the rated range before powering on.
  • The sensor can detect normally after 100ms of power on.
  • When the sensor and the load use different power supplies, please make sure to turn on the power of the sensor first.
  • When the sensor is not in use, it is recommended to cut off the power on the load first, and then cut off the power on the sensor.
  • Do not subject the sensor to severe external force (such as hammering, etc.) during installation to avoid damaging the sensor performance.
  • Avoid using thinners, alcohol or other organic solvents when cleaning.
Product reviews
Handheld Photometer
5
Heller
Avatar
11/4/2025 7:18 PM
We are looking for a photometer similar to a handheld digital illuminance meter, with a measurement range of 0~199999 lux. Ideally, it should have a USB or RS232 communication interface.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we do not have any handheld digital illuminance photometer recommendations.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The photoelectric label sensor supports 12-24VDC wide range power input, has an operating temperature range of -20~60℃ and IP65 protection level, and is widely used in automated packaging and printing equipment such as label positioning and transparent label detection.

Specification

ModelNPNATO-LAP-TR03TNBATO-LAP-TR03TNB-F3
PNPATO-LAP-TR03TPBATO-LAP-TR03TPB-F3
Connection2m 3 pins cable25cm cable + M8 connector
Slot width3mm
Slot depth60mm
Label minimum spacing≥2mm
Light sourceInfrared light (940nm)
Response frequencyMax 10kHz
Label passing speed≤20m/min (0.3m/s)
Response time≤50μs
Delay after startup≤300ms
Supply voltage high/low12-24VDC (Ripple≤15%)
Current consumption≤30mA
Warning outputRed indicator light on
Switch output functionLight on/ dark on (Switchable)
Voltage drop≤2V
Output current≤10mA
IndicatorRed light: Calibration error/operation error; Green light: NO NC; Blue light: detect label switch output signal
Operation temperature-20-60℃ (No icing, no condensation)
Storage te mperature-30-70℃
Protection degreeIP65
VDE safety levelⅢ
WeightApproximately 55g (100g with wire)
MaterialZinc die casting; surface electroless nickel plating (Silver); PC plastic


Dimension (Unit: mm)

Photoelectric label sensor dimension

Wiring diagram

Photoelectric label sensor wiring diagram

Tips: Precautions for using photoelectric label sensor

  • Make sure the power supply voltage is within the rated range before powering on.
  • The sensor can detect normally after 100ms of power on.
  • When the sensor and the load use different power supplies, please make sure to turn on the power of the sensor first.
  • When the sensor is not in use, it is recommended to cut off the power on the load first, and then cut off the power on the sensor.
  • Do not subject the sensor to severe external force (such as hammering, etc.) during installation to avoid damaging the sensor performance.
  • Avoid using thinners, alcohol or other organic solvents when cleaning.
Product reviews
Handheld Photometer
5
Heller
Avatar
11/4/2025 7:18 PM
We are looking for a photometer similar to a handheld digital illuminance meter, with a measurement range of 0~199999 lux. Ideally, it should have a USB or RS232 communication interface.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we do not have any handheld digital illuminance photometer recommendations.
Only registered users can write reviews