Nema 34 Stepper Motor, 3A, 1.2 degree, 3 phase 6 wires

$148.46
Nema 34 Hybrid Stepper motor with high torque, 5.4 Nm holding torque, body in 96mm long, 1.2 deg. step angle, widely applied in printing machine, industrial automation, etc. Brand new and manufacturer direct sale.
SKU: ATO-STEP-30963403
Free Shipping
Delivery date: 6-12 days

Nema 34 Stepper motor, 5.4Nm holding torque, 3A phase curent, 1.2° step angle, manufacturer direct sale.

Specification

BasicsModelATO3096-3006A
Matched Driver ModelATODSP32207(Click it to see more info)
Holding torque5.4Nm
Current/phase3A
Resistance1.74Ω
Step angle1.2°
Rotor inertia2200g.cm²
Weight2.8kg
Length96mm
Motor leads6
Technical parametersStep Angle Accuracy±5%(full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max.(rated current, 2 phase on)
Ambient Temperature-10℃~+ 50℃
Insulation Resistance100MΩ Min 500V DC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.06Max.(450g)
Shaft Axial Play0.08Max.(450g)

Dimensions

nema 34 stepper motor dimension

Motor Connection

3 phase stepper motor wiring

Details

Nema 34 Stepper Motor,1.1A-8A Details

Tips: Selection of the stepper motor: how to select stepper motor driver?

  1. Constant voltage drive is generally only applicable for the rotation at the velocity lower than 150rpm and under the circumstance of large batch and low cost. What is further common is constant current drive.
  2. Besides good high velocity holding torque, the rotational smoothness of the motor with constant current drive can be improved through subdivision of driver. Firstly, it is necessary to match drive voltage and current and subdivision number. If the working speed is not low, the subdivision number is generally between 1/8~1/64. Partial torque of subdivision part will be lost. Subdivision is mainly for rotational smoothness, the uniformity at each step after subdivision cannot be guaranteed.
  3. According to the requirement of structural arrangement, integrated stepper motor connecting the stepper motor with the driver can be selected.
  4. As for the superior driver, besides good product quality coherence and stability, better performance in smoothness of rotation at low velocity and torque of rotation at high velocity should also be made.
  5. As for high voltage driver, under the circumstance that input power voltage stability is not high enough, the strong and weak current of the drive should completely separate.
  6. To make full use of stepper motor, certain margin should be left for the current of the driver under the circumstance that the torque margin of the stepper motor is very little.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 34 Stepper motor, 5.4Nm holding torque, 3A phase curent, 1.2° step angle, manufacturer direct sale.

Specification

BasicsModelATO3096-3006A
Matched Driver ModelATODSP32207(Click it to see more info)
Holding torque5.4Nm
Current/phase3A
Resistance1.74Ω
Step angle1.2°
Rotor inertia2200g.cm²
Weight2.8kg
Length96mm
Motor leads6
Technical parametersStep Angle Accuracy±5%(full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max.(rated current, 2 phase on)
Ambient Temperature-10℃~+ 50℃
Insulation Resistance100MΩ Min 500V DC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.06Max.(450g)
Shaft Axial Play0.08Max.(450g)

Dimensions

nema 34 stepper motor dimension

Motor Connection

3 phase stepper motor wiring

Details

Nema 34 Stepper Motor,1.1A-8A Details

Tips: Selection of the stepper motor: how to select stepper motor driver?

  1. Constant voltage drive is generally only applicable for the rotation at the velocity lower than 150rpm and under the circumstance of large batch and low cost. What is further common is constant current drive.
  2. Besides good high velocity holding torque, the rotational smoothness of the motor with constant current drive can be improved through subdivision of driver. Firstly, it is necessary to match drive voltage and current and subdivision number. If the working speed is not low, the subdivision number is generally between 1/8~1/64. Partial torque of subdivision part will be lost. Subdivision is mainly for rotational smoothness, the uniformity at each step after subdivision cannot be guaranteed.
  3. According to the requirement of structural arrangement, integrated stepper motor connecting the stepper motor with the driver can be selected.
  4. As for the superior driver, besides good product quality coherence and stability, better performance in smoothness of rotation at low velocity and torque of rotation at high velocity should also be made.
  5. As for high voltage driver, under the circumstance that input power voltage stability is not high enough, the strong and weak current of the drive should completely separate.
  6. To make full use of stepper motor, certain margin should be left for the current of the driver under the circumstance that the torque margin of the stepper motor is very little.
Only registered users can write reviews