Nema 34 Stepper Motor, 1.1A, 1.2 degree, 3 phase 6 wires

$148.46
3-phase 6-wire Nema 34 Stepper motor features 1.2 deg. step angle(300 steps/revolution). Each phase draws current 1.1A, allowing for holding torque of 5.4Nm. Brand new and manufacturer direct sale.
SKU: ATO-STEP-30963411
Free Shipping
Delivery date: 6-12 days

Nema 34 Stepper motor, 5.4Nm holding torque, 1.1A phase curent, 1.2° step angle, manufacturer direct sale.

Specification

BasicsModelATO3096-1106A
Matched Driver ModelATODSP32207(Click it to see more info)
Holding torque5.4Nm
Current/phase1.1A
Resistance10.3Ω
Step angle1.2°
Rotor inertia2200g.cm²
Weight2.8kg
Length96mm
Motor leads6
Technical parametersStep Angle Accuracy±5%(full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max.(rated current, 2 phase on)
Ambient Temperature-10℃~+ 50℃
Insulation Resistance100MΩ Min 500V DC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.06Max.(450g)
Shaft Axial Play0.08Max.(450g)

Dimensions

nema 34 stepper motor dimension

Motor Connection

3 phase stepper motor wiring

Details

Nema 34 Stepper Motor,1.1A-8A Details

Tips: What is 2-phase stepper motor?

2-phase stepper motor is the most common stepper motor and also the choice with best performance ratio. Therefore, under the circumstance of no special requirements, it is necessary to give priority in choosing the 2-phase stepper motor. The 2-pahse stepper motors are mainly hybrid stepper motors. The smoothness of 2-phase stepper is not better than that of 3-phase and 5-phase stepper motor. However, the usage requirements of majority of users can be satisfied under the circumstance of subdivided drive. The stepping angle of 2-pahse hybrid stepping angle is generally 1.8° and 0.9°, first of which is common while 0.9° will be taken into account for the occasion of low-velocity rotation. As for 2-pahse hybrid stepper motor, there are also stepping angles namely 3.6° and 3.75°, which are not common. The stepping angle with large stepping angle is applicable for the occasion of high-velocity rotation, featuring relatively low noise.
The size range of common flange of 2-phase stepping motor is 20-110mm. Compared to the stepper motor with larger size of flange, 3-phase stepper motor is more advantageous. Meanwhile, compared to the stepper motor with smaller size of flange, PM stepper motor has obvious advantage over size and cost.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
I feel satisfied with this stepper motor.
5
Riley
Avatar
6/26/2018 7:57 PM
After using this stepper motor for several days, I can tell that there is a bit noise but it can be accepted. The motor torque is enough for my application and the speed is also OK. I feel satisfied.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 34 Stepper motor, 5.4Nm holding torque, 1.1A phase curent, 1.2° step angle, manufacturer direct sale.

Specification

BasicsModelATO3096-1106A
Matched Driver ModelATODSP32207(Click it to see more info)
Holding torque5.4Nm
Current/phase1.1A
Resistance10.3Ω
Step angle1.2°
Rotor inertia2200g.cm²
Weight2.8kg
Length96mm
Motor leads6
Technical parametersStep Angle Accuracy±5%(full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max.(rated current, 2 phase on)
Ambient Temperature-10℃~+ 50℃
Insulation Resistance100MΩ Min 500V DC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.06Max.(450g)
Shaft Axial Play0.08Max.(450g)

Dimensions

nema 34 stepper motor dimension

Motor Connection

3 phase stepper motor wiring

Details

Nema 34 Stepper Motor,1.1A-8A Details

Tips: What is 2-phase stepper motor?

2-phase stepper motor is the most common stepper motor and also the choice with best performance ratio. Therefore, under the circumstance of no special requirements, it is necessary to give priority in choosing the 2-phase stepper motor. The 2-pahse stepper motors are mainly hybrid stepper motors. The smoothness of 2-phase stepper is not better than that of 3-phase and 5-phase stepper motor. However, the usage requirements of majority of users can be satisfied under the circumstance of subdivided drive. The stepping angle of 2-pahse hybrid stepping angle is generally 1.8° and 0.9°, first of which is common while 0.9° will be taken into account for the occasion of low-velocity rotation. As for 2-pahse hybrid stepper motor, there are also stepping angles namely 3.6° and 3.75°, which are not common. The stepping angle with large stepping angle is applicable for the occasion of high-velocity rotation, featuring relatively low noise.
The size range of common flange of 2-phase stepping motor is 20-110mm. Compared to the stepper motor with larger size of flange, 3-phase stepper motor is more advantageous. Meanwhile, compared to the stepper motor with smaller size of flange, PM stepper motor has obvious advantage over size and cost.

Product reviews
I feel satisfied with this stepper motor.
5
Riley
Avatar
6/26/2018 7:57 PM
After using this stepper motor for several days, I can tell that there is a bit noise but it can be accepted. The motor torque is enough for my application and the speed is also OK. I feel satisfied.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews